Hi Yoandy. As Stef said, the recommended way to install SqueakDBX or GlorpDBX in Pharo is using Metacello. You can see read that in this link (please take a look):
http://www.squeakdbx.org/Installation
Right now, to install SqueakDBX you have to evaluate:
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfSqueakDBX'; load.
((Smalltalk at: #ConfigurationOfSqueakDBX) project version: '1.2') load.
And for GlorpDBX:
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfGlorpDBX'; load.
((Smalltalk at: #ConfigurationOfGlorpDBX) project version: '1.0') load.
Cheers
Mariano
On Thu, Apr 1, 2010 at 5:25 PM, Stéphane Ducasse stephane.ducasse@inria.frwrote:
On Apr 1, 2010, at 4:21 PM, Yoandy Rodríguez Martínez wrote:
hello: I'm trying to install SqueakDBX and evaluating 'Installer ss' fails cause
squeaksource message is not understood. I got Installer-Core-nm.357 from squeaksource. Is it a bug or did I just installed the wrong package?. Can anyone please send me the code of squeaksource method so I can fix my working copy?
I'm sure that mariano will reply better than me but use the ConfigurationOfxxx in the metaRepository do load it, or Gofer. I'm not sure that Installer is maintained in Pharo and this is not the preferred way.
Stef
Pharo-users mailing list Pharo-users@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users
Pharo-users mailing list Pharo-users@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users
On the lastest Pharo 1.1 the following :-
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfGlorpDBX'; load.
((Smalltalk at: #ConfigurationOfGlorpDBX) project version: '1.0') load.
causes a syntax error in Scanner#xLetter. Has anyone installed GlorpDBX on Pharo1.1?
On Thu, Apr 1, 2010 at 11:43, Mariano Martinez Peck marianopeck@gmail.com wrote:
Hi Yoandy. As Stef said, the recommended way to install SqueakDBX or GlorpDBX in Pharo is using Metacello. You can see read that in this link (please take a look):
http://www.squeakdbx.org/Installation
Right now, to install SqueakDBX you have to evaluate:
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfSqueakDBX'; load.
((Smalltalk at: #ConfigurationOfSqueakDBX) project version: '1.2') load.
And for GlorpDBX:
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfGlorpDBX'; load.
((Smalltalk at: #ConfigurationOfGlorpDBX) project version: '1.0') load.
Cheers
Mariano
On Thu, Apr 1, 2010 at 5:25 PM, Stéphane Ducasse stephane.ducasse@inria.fr wrote:
On Apr 1, 2010, at 4:21 PM, Yoandy Rodríguez Martínez wrote:
hello: I'm trying to install SqueakDBX and evaluating 'Installer ss' fails cause squeaksource message is not understood. I got Installer-Core-nm.357 from squeaksource. Is it a bug or did I just installed the wrong package?. Can anyone please send me the code of squeaksource method so I can fix my working copy?
I'm sure that mariano will reply better than me but use the ConfigurationOfxxx in the metaRepository do load it, or Gofer. I'm not sure that Installer is maintained in Pharo and this is not the preferred way.
Stef
Pharo-users mailing list Pharo-users@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users
Pharo-users mailing list Pharo-users@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users
SqueakDBX mailing list SqueakDBX@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/squeakdbx
-- -JT
I think this requires that the patch to Scanner>xLetter (available from the squeakdbx.org) be installed, before you try to load Glorp - so '_' can be used in message names.
The other problem you may run in to is that Set>>add: is defined in GlorpPostload. The method has an '_' assignment. So depending on your image preferences, it may not be loadable. I didn't have write permission on the repo, and then it fell off my todo list; otherwise I would have uploaded this fix.
John Toohey wrote:
On the lastest Pharo 1.1 the following :-
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfGlorpDBX'; load.
((Smalltalk at: #ConfigurationOfGlorpDBX) project version: '1.0') load.
causes a syntax error in Scanner#xLetter. Has anyone installed GlorpDBX on Pharo1.1?
Hi, Where exactly is the patch available from? I cannot find it on the site.
Thanks.
On Wed, Jun 23, 2010 at 02:10, Yanni Chiu yanni@rogers.com wrote:
I think this requires that the patch to Scanner>xLetter (available from the squeakdbx.org) be installed, before you try to load Glorp - so '_' can be used in message names.
The other problem you may run in to is that Set>>add: is defined in GlorpPostload. The method has an '_' assignment. So depending on your image preferences, it may not be loadable. I didn't have write permission on the repo, and then it fell off my todo list; otherwise I would have uploaded this fix.
John Toohey wrote:
On the lastest Pharo 1.1 the following :-
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfGlorpDBX'; load.
((Smalltalk at: #ConfigurationOfGlorpDBX) project version: '1.0') load.
causes a syntax error in Scanner#xLetter. Has anyone installed GlorpDBX on Pharo1.1?
SqueakDBX mailing list SqueakDBX@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/squeakdbx
On Wed, Jun 23, 2010 at 6:24 PM, John Toohey jt@parspro.com wrote:
Hi, Where exactly is the patch available from? I cannot find it on the site.
It is a hack:
(HTTPSocket httpGet: ' http://www.assembla.com/spaces/SqueakDBX/documents/dvVhPSvuCr3OqXeJe5aVNr/do...') readStream fileIn
Cheers
Mariano
Thanks.
On Wed, Jun 23, 2010 at 02:10, Yanni Chiu yanni@rogers.com wrote:
I think this requires that the patch to Scanner>xLetter (available from
the
squeakdbx.org) be installed, before you try to load Glorp - so '_' can
be
used in message names.
The other problem you may run in to is that Set>>add: is defined in GlorpPostload. The method has an '_' assignment. So depending on your
image
preferences, it may not be loadable. I didn't have write permission on
the
repo, and then it fell off my todo list; otherwise I would have uploaded this fix.
John Toohey wrote:
On the lastest Pharo 1.1 the following :-
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfGlorpDBX'; load.
((Smalltalk at: #ConfigurationOfGlorpDBX) project version: '1.0') load.
causes a syntax error in Scanner#xLetter. Has anyone installed GlorpDBX on Pharo1.1?
SqueakDBX mailing list SqueakDBX@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/squeakdbx
-- -JT _______________________________________________ SqueakDBX mailing list SqueakDBX@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/squeakdbx
On Wed, Jun 23, 2010 at 8:10 AM, Yanni Chiu yanni@rogers.com wrote:
I think this requires that the patch to Scanner>xLetter (available from the squeakdbx.org) be installed, before you try to load Glorp - so '_' can be used in message names.
The other problem you may run in to is that Set>>add: is defined in GlorpPostload. The method has an '_' assignment. So depending on your image preferences, it may not be loadable. I didn't have write permission on the repo, and then it fell off my todo list; otherwise I would have uploaded this fix.
Yes, this was the problem. THe hack to support _ in selecrtors, used _ as assigment hahahaha I have just commited a fix. If you run that code again it should work. However, for Pharo 1.1 I remommend to use version 1.1 and not 1.0
cheers
Mariano
John Toohey wrote:
On the lastest Pharo 1.1 the following :-
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfGlorpDBX'; load.
((Smalltalk at: #ConfigurationOfGlorpDBX) project version: '1.0') load.
causes a syntax error in Scanner#xLetter. Has anyone installed GlorpDBX on Pharo1.1?
SqueakDBX mailing list SqueakDBX@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/squeakdbx
Yep, 1.1 loads without problems. Didn't know that it was available. Thanks for the help.
On Wed, Jun 23, 2010 at 15:16, Mariano Martinez Peck marianopeck@gmail.com wrote:
On Wed, Jun 23, 2010 at 8:10 AM, Yanni Chiu yanni@rogers.com wrote:
I think this requires that the patch to Scanner>xLetter (available from the squeakdbx.org) be installed, before you try to load Glorp - so '_' can be used in message names.
The other problem you may run in to is that Set>>add: is defined in GlorpPostload. The method has an '_' assignment. So depending on your image preferences, it may not be loadable. I didn't have write permission on the repo, and then it fell off my todo list; otherwise I would have uploaded this fix.
Yes, this was the problem. THe hack to support _ in selecrtors, used _ as assigment hahahaha I have just commited a fix. If you run that code again it should work. However, for Pharo 1.1 I remommend to use version 1.1 and not 1.0
cheers
Mariano
John Toohey wrote:
On the lastest Pharo 1.1 the following :-
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfGlorpDBX'; load.
((Smalltalk at: #ConfigurationOfGlorpDBX) project version: '1.0') load.
causes a syntax error in Scanner#xLetter. Has anyone installed GlorpDBX on Pharo1.1?
SqueakDBX mailing list SqueakDBX@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/squeakdbx
SqueakDBX mailing list SqueakDBX@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/squeakdbx
On Wed, Jun 23, 2010 at 12:21 AM, John Toohey jt@parspro.com wrote:
On the lastest Pharo 1.1 the following :-
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfGlorpDBX'; load.
((Smalltalk at: #ConfigurationOfGlorpDBX) project version: '1.0') load.
causes a syntax error in Scanner#xLetter. Has anyone installed GlorpDBX on Pharo1.1?
yes, but I am using 1.1 version:
((Smalltalk at: #ConfigurationOfGlorpDBX) project version: '1.1') load.
Cheers
Mariano
On Thu, Apr 1, 2010 at 11:43, Mariano Martinez Peck marianopeck@gmail.com wrote:
Hi Yoandy. As Stef said, the recommended way to install SqueakDBX or
GlorpDBX in Pharo is using Metacello.
You can see read that in this link (please take a look):
http://www.squeakdbx.org/Installation
Right now, to install SqueakDBX you have to evaluate:
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfSqueakDBX'; load.
((Smalltalk at: #ConfigurationOfSqueakDBX) project version: '1.2') load.
And for GlorpDBX:
Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfGlorpDBX'; load.
((Smalltalk at: #ConfigurationOfGlorpDBX) project version: '1.0') load.
Cheers
Mariano
On Thu, Apr 1, 2010 at 5:25 PM, Stéphane Ducasse <
stephane.ducasse@inria.fr> wrote:
On Apr 1, 2010, at 4:21 PM, Yoandy Rodríguez Martínez wrote:
hello: I'm trying to install SqueakDBX and evaluating 'Installer ss' fails
cause squeaksource message is not understood. I got Installer-Core-nm.357 from squeaksource. Is it a bug or did I just installed the wrong package?. Can anyone please send me the code of squeaksource method so I can fix my working copy?
I'm sure that mariano will reply better than me but use the ConfigurationOfxxx in the metaRepository do load it, or Gofer. I'm not sure that Installer is maintained in Pharo and this is not the
preferred way.
Stef
Pharo-users mailing list Pharo-users@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users
Pharo-users mailing list Pharo-users@lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users
SqueakDBX mailing list SqueakDBX@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/squeakdbx
-- -JT _______________________________________________ SqueakDBX mailing list SqueakDBX@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/squeakdbx
squeakdbx@lists.squeakfoundation.org
-
John Toohey -
Mariano Martinez Peck -
Yanni Chiu