[Seaside] ANN: Seaside 2.9a1 release

Lautaro Fernández evaklo at gmail.com
Mon Nov 17 14:05:53 UTC 2008

2008/11/15 Philippe Marschall <philippe.marschall at gmail.com>

> 2008/11/11, Lautaro Fernández <evaklo at gmail.com>:
> > Hi,
> >
> > 2008/11/9 Julian Fitzell <jfitzell at gmail.com>
> >
> >> [...]
> >> A more complete list of change and new features can be found at
> >> http://seaside.st/community/development/seaside29
> >>
> >
> > That page (under Modularization) says the following:
> >
> > [...]
> >
> > It allows for smaller Seaside installations. For example you can have
> >> Seaside without the tests or without Kom and use Swazoo 2 instead.
> >
> > [...]
> >>
> >
> > This mean that just a few changes need to be made in order to get a
> working
> > Swazoo-Seaside server?
> It means no changes need to be made. Swazoo 2.1 is supported out of
> the box (well in theory at least, in practice it has only been tested
> on Squeak).
> > Could you tell me a place to see a how-to use this modularity in order to
> > make the port of Swazoo to work with Seaside?
> To get everything working in Squeak you need to:
> - open an "empty" Squeak image doesn't have Seaside, Sport or Swazoo loaded
> - drag and drop the attached file over the Squeak window
> - select "fileIn entire file"
> - if a debugger opens telling you that instance variables start with a
> lower case letter hit proceed
> - when everything is done evaluate
>  WASwazooAdaptor startOn: 8080
> - go to

All ran OK, except to save the image. The WASqueakPlatfrorm (class) does not
understand the method "withName:withPriority:fork:", which is called from
the CTPusher(classs)>>startUp. I commented that part and the where no more
troubles anymore.

About the first seaside-2-9-0a1.cs that Julian had attached, I keep getting
an error if I tried to load it on a fresh Squeak 3.9 image.
Internal Server Error
MessageNotUnderstood: WAKom>>dispatchRequest:

I'm loading it wrong? (this didn't happened to me on last Thursday)

> If you open the Monticello Browser from the world menu you'll see a
> lot of Seaside-*, Javascript-*, Scriptaculous-*, RSS-* and JQuery-*
> packages that make up Seaside. Everything that has no -Squeak- in the
> package name should load directly into VW. Everything that has a
> -Squeak- in the package name has to be reimplemented (only if you want
> it of course). However most parts can probably be salvaged either from
> the existing 2.8 port or the Squeak implementation.

Good to know, thank =]

> Cincom supports Seaside so it's probably best to talk to them.

The main problem is that they will port (or made it avaible) Seaside 2.9 for
the next realise (which will be in US summer), but now we need to work with
Swazoo instead of Opentalk-Http (which does not support streaming responses
quite well).
But I'll try again to see if they can give me a workaround.

Thanks again Philippe.
Lautaro Fernández

> Cheers
> Philippe
> _______________________________________________
> seaside mailing list
> seaside at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

Luke LAut SkyFernadezWalker
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.squeakfoundation.org/pipermail/seaside/attachments/20081117/2b9319da/attachment.htm

More information about the seaside mailing list