[Seaside] MNU after clean install...

[Boris Popov]

This same image + vm combo running on XP is working just fine. Sigh.

-Boris

-- 
+1.604.689.0322
DeepCove Labs Ltd.
4th floor 595 Howe Street
Vancouver, Canada V6C 2T5
http://tinyurl.com/r7uw4

-----Original Message-----
From: seaside-bounces at lists.squeakfoundation.org [mailto:seaside-bounces at lists.squeakfoundation.org] On Behalf Of Boris Popov
Sent: Wednesday, July 22, 2009 11:44 AM
To: Seaside - general discussion
Subject: RE: [Seaside] MNU after clean install...

Julian,

Not surprisingly, 

Duration
0:00:00:00.004
0:00:00:00.002
0:00:00:00.004
0:00:00:00.001
0:00:00:00.004
0:00:00:00.002
0:00:00:00.004

Web Inspector and Firebug both report the bulk of that time spent in Latency (Safari term) or Connecting/Waiting for response (Firebug term). I'll try this on plain XP tonight to see if it might be a Vista issue.

-Boris

-- 
+1.604.689.0322
DeepCove Labs Ltd.
4th floor 595 Howe Street
Vancouver, Canada V6C 2T5
http://tinyurl.com/r7uw4


-----Original Message-----
From: seaside-bounces at lists.squeakfoundation.org [mailto:seaside-bounces at lists.squeakfoundation.org] On Behalf Of Julian Fitzell
Sent: Wednesday, July 22, 2009 11:21 AM
To: Seaside - general discussion
Subject: Re: [Seaside] MNU after clean install...

Not off the top of my head.

The development tools are kind of hard to enable in the 2.9 alphas at
the moment but try this to get the profiler:

+ make sure Seaside-Squeak-Development package is loaded
+ go to the config page
+ click Configure next to your application
+ under Ancestry, the configuration "Application Defaults" should be
listed; if not, add it
+ click "Application Defaults". This configuration should be inherited
by all applications by default
+ add WADevelopmentConfiguration to the ancestry
+ click Close
+ click Close
+ start a new session of your application

Now you can click Profile in the toolbar, do a few requests and click
"stop profiling".  Hopefully the tree view will shed some light on
where all the time is being spent (it's definitely not slow in my
image).

Julian

On Wed, Jul 22, 2009 at 9:50 AM, Boris Popov<boris at deepcovelabs.com> wrote:
> Julian,
>
> Thanks, that did the trick. Now, would you have any idea why it might be
> taking 2,000ms to increment a counter example in this configuration?
> Seaside 2.8 on VisualWorks averages around 70ms on my machine, so
> there's got to be something wrong with the setup of Pharo and 2.9a4 on
> my side... Specific comparison screenshots can be found at
> http://tinyurl.com/mqsprp
>
> Cheers!
>
> -Boris
>
> --
> +1.604.689.0322
> DeepCove Labs Ltd.
> 4th floor 595 Howe Street
> Vancouver, Canada V6C 2T5
> http://tinyurl.com/r7uw4
>
>
> -----Original Message-----
> From: seaside-bounces at lists.squeakfoundation.org
> [mailto:seaside-bounces at lists.squeakfoundation.org] On Behalf Of Julian
> Fitzell
> Sent: Tuesday, July 21, 2009 11:07 PM
> To: Seaside - general discussion
> Subject: Re: [Seaside] MNU after clean install...
>
> Indeed. You'll see this problem if you use WAKom to start your
> adaptor. Nobody noticed because all we're all using the new control
> panel instead... :)
>
> http://code.google.com/p/seaside/issues/detail?id=411
>
> This is fixed in Seaside-Adaptors-Comanche-jf.41 if you want to update.
>
> Or:
>  - add a call to #new in WAKom>>defaultCodec and
> WAKomEncoded>>defaultCodec; or
>  - use the control panel available in the World->Tools->more... menu
> to add the instance instead; or
>  - execute "WAKom default codec: WANullCodec new"
>
> Julian
>
> On Tue, Jul 21, 2009 at 9:33 PM, Boris Popov<boris at deepcovelabs.com>
> wrote:
>> Same here, heh, my first time with pharo too.
>>
>> -Boris (via BlackBerry)
>>
>> ----- Original Message -----
>> From: seaside-bounces at lists.squeakfoundation.org
>> <seaside-bounces at lists.squeakfoundation.org>
>> To: seaside at lists.squeakfoundation.org
> <seaside at lists.squeakfoundation.org>
>> Sent: Tue Jul 21 21:16:34 2009
>> Subject: [Seaside] MNU after clean install...
>>
>> After I perform an install of Seaside 2.9.0a4 on a clean Pharo image,
>> I start Comanche and when I navigate to the url
>> (localhost:port/seaside), I receive the following error.
>> Does anyone else get this error?
>>
>> ==========================
>>
>> Internal Server Error
>>
>> MessageNotUnderstood: WANullCodec class>>url
>>
>> ==========================
>>
>> Thanks,
>>
>> Eric
>> _______________________________________________
>> seaside mailing list
>> seaside at lists.squeakfoundation.org
>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>>
>> _______________________________________________
>> seaside mailing list
>> seaside at lists.squeakfoundation.org
>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>>
>>
> _______________________________________________
> seaside mailing list
> seaside at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> _______________________________________________
> seaside mailing list
> seaside at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>
_______________________________________________
seaside mailing list
seaside at lists.squeakfoundation.org
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
_______________________________________________
seaside mailing list
seaside at lists.squeakfoundation.org
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside