[Seaside] MNU after clean install...

Wed Jul 22 19:10:51 UTC 2009

On Wed, Jul 22, 2009 at 6:09 PM, Boris Popov <boris at deepcovelabs.com> wrote:

> This same image + vm combo running on XP is working just fine. Sigh.
>

Sorry, I cannot resist, but Vista sucks.

>
> -Boris
>
> --
> +1.604.689.0322
> DeepCove Labs Ltd.
> 4th floor 595 Howe Street
> Vancouver, Canada V6C 2T5
> http://tinyurl.com/r7uw4
>
> -----Original Message-----
> From: seaside-bounces at lists.squeakfoundation.org [mailto:
> seaside-bounces at lists.squeakfoundation.org] On Behalf Of Boris Popov
> Sent: Wednesday, July 22, 2009 11:44 AM
> To: Seaside - general discussion
> Subject: RE: [Seaside] MNU after clean install...
>
> Julian,
>
> Not surprisingly,
>
> Duration
> 0:00:00:00.004
> 0:00:00:00.002
> 0:00:00:00.004
> 0:00:00:00.001
> 0:00:00:00.004
> 0:00:00:00.002
> 0:00:00:00.004
>
> Web Inspector and Firebug both report the bulk of that time spent in
> Latency (Safari term) or Connecting/Waiting for response (Firebug term).
> I'll try this on plain XP tonight to see if it might be a Vista issue.
>
> -Boris
>
> --
> +1.604.689.0322
> DeepCove Labs Ltd.
> 4th floor 595 Howe Street
> Vancouver, Canada V6C 2T5
> http://tinyurl.com/r7uw4
>
>
> -----Original Message-----
> From: seaside-bounces at lists.squeakfoundation.org [mailto:
> seaside-bounces at lists.squeakfoundation.org] On Behalf Of Julian Fitzell
> Sent: Wednesday, July 22, 2009 11:21 AM
> To: Seaside - general discussion
> Subject: Re: [Seaside] MNU after clean install...
>
> Not off the top of my head.
>
> The development tools are kind of hard to enable in the 2.9 alphas at
> the moment but try this to get the profiler:
>
> + make sure Seaside-Squeak-Development package is loaded
> + go to the config page
> + click Configure next to your application
> + under Ancestry, the configuration "Application Defaults" should be
> listed; if not, add it
> + click "Application Defaults". This configuration should be inherited
> by all applications by default
> + add WADevelopmentConfiguration to the ancestry
> + click Close
> + click Close
> + start a new session of your application
>
> Now you can click Profile in the toolbar, do a few requests and click
> "stop profiling".  Hopefully the tree view will shed some light on
> where all the time is being spent (it's definitely not slow in my
> image).
>
> Julian
>
> On Wed, Jul 22, 2009 at 9:50 AM, Boris Popov<boris at deepcovelabs.com>
> wrote:
> > Julian,
> >
> > Thanks, that did the trick. Now, would you have any idea why it might be
> > taking 2,000ms to increment a counter example in this configuration?
> > Seaside 2.8 on VisualWorks averages around 70ms on my machine, so
> > there's got to be something wrong with the setup of Pharo and 2.9a4 on
> > my side... Specific comparison screenshots can be found at
> > http://tinyurl.com/mqsprp
> >
> > Cheers!
> >
> > -Boris
> >
> > --
> > +1.604.689.0322
> > DeepCove Labs Ltd.
> > 4th floor 595 Howe Street
> > Vancouver, Canada V6C 2T5
> > http://tinyurl.com/r7uw4
> >
> >
> > -----Original Message-----
> > From: seaside-bounces at lists.squeakfoundation.org
> > [mailto:seaside-bounces at lists.squeakfoundation.org] On Behalf Of Julian
> > Fitzell
> > Sent: Tuesday, July 21, 2009 11:07 PM
> > To: Seaside - general discussion
> > Subject: Re: [Seaside] MNU after clean install...
> >
> > Indeed. You'll see this problem if you use WAKom to start your
> > adaptor. Nobody noticed because all we're all using the new control
> > panel instead... :)
> >
> > http://code.google.com/p/seaside/issues/detail?id=411
> >
> > This is fixed in Seaside-Adaptors-Comanche-jf.41 if you want to update.
> >
> > Or:
> >  - add a call to #new in WAKom>>defaultCodec and
> > WAKomEncoded>>defaultCodec; or
> >  - use the control panel available in the World->Tools->more... menu
> > to add the instance instead; or
> >  - execute "WAKom default codec: WANullCodec new"
> >
> > Julian
> >
> > On Tue, Jul 21, 2009 at 9:33 PM, Boris Popov<boris at deepcovelabs.com>
> > wrote:
> >> Same here, heh, my first time with pharo too.
> >>
> >> -Boris (via BlackBerry)
> >>
> >> ----- Original Message -----
> >> From: seaside-bounces at lists.squeakfoundation.org
> >> <seaside-bounces at lists.squeakfoundation.org>
> >> To: seaside at lists.squeakfoundation.org
> > <seaside at lists.squeakfoundation.org>
> >> Sent: Tue Jul 21 21:16:34 2009
> >> Subject: [Seaside] MNU after clean install...
> >>
> >> After I perform an install of Seaside 2.9.0a4 on a clean Pharo image,
> >> I start Comanche and when I navigate to the url
> >> (localhost:port/seaside), I receive the following error.
> >> Does anyone else get this error?
> >>
> >> ==========================
> >>
> >> Internal Server Error
> >>
> >> MessageNotUnderstood: WANullCodec class>>url
> >>
> >> ==========================
> >>
> >> Thanks,
> >>
> >> Eric
> >> _______________________________________________
> >> seaside mailing list
> >> seaside at lists.squeakfoundation.org
> >> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >>
> >> _______________________________________________
> >> seaside mailing list
> >> seaside at lists.squeakfoundation.org
> >> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >>
> >>
> > _______________________________________________
> > seaside mailing list
> > seaside at lists.squeakfoundation.org
> > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> > _______________________________________________
> > seaside mailing list
> > seaside at lists.squeakfoundation.org
> > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> >
> _______________________________________________
> seaside mailing list
> seaside at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> _______________________________________________
> seaside mailing list
> seaside at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> _______________________________________________
> seaside mailing list
> seaside at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.squeakfoundation.org/pipermail/seaside/attachments/20090722/0a61e328/attachment-0001.htm