[Seaside] MNU after clean install...

Wed Jul 22 19:21:54 UTC 2009

Hmm, good point, 127.0.0.1 is definitely snappy, but removing IPv6 address from a hosts file didn't seem to make any difference. Oh well, this gets me going anyway, thanks!

-Boris

-- 
+1.604.689.0322
DeepCove Labs Ltd.
4th floor 595 Howe Street
Vancouver, Canada V6C 2T5
http://tinyurl.com/r7uw4

-----Original Message-----
From: seaside-bounces at lists.squeakfoundation.org [mailto:seaside-bounces at lists.squeakfoundation.org] On Behalf Of Julian Fitzell
Sent: Wednesday, July 22, 2009 12:17 PM
To: Seaside - general discussion
Subject: Re: [Seaside] MNU after clean install...

Hmm... ipv6? Could be something to do with how localhost is resolving
- it could be trying ipv6 first then timing out after 2 seconds.

Check the hosts file and see if you need to swap the order of the
entries or something.

Julian

On Wed, Jul 22, 2009 at 12:13 PM, Boris Popov<boris at deepcovelabs.com> wrote:
> I can't say I disagree, but it doesn't help me ;) It can't be a system-wide
> issue though, as Apache on this same machine behaves normally (0ms
> connecting, 5ms waiting for response).
>
>
>
> -Boris
>
>
>
> --
>
> +1.604.689.0322
>
> DeepCove Labs Ltd.
>
> 4th floor 595 Howe Street
>
> Vancouver, Canada V6C 2T5
>
> http://tinyurl.com/r7uw4
>
>
>
> From: seaside-bounces at lists.squeakfoundation.org
> [mailto:seaside-bounces at lists.squeakfoundation.org] On Behalf Of Mariano
> Martinez Peck
> Sent: Wednesday, July 22, 2009 12:11 PM
> To: Seaside - general discussion
> Subject: Re: [Seaside] MNU after clean install...
>
>
>
>
>
> On Wed, Jul 22, 2009 at 6:09 PM, Boris Popov <boris at deepcovelabs.com> wrote:
>
> This same image + vm combo running on XP is working just fine. Sigh.
>
> Sorry, I cannot resist, but Vista sucks.
>
>
> -Boris
>
> --
> +1.604.689.0322
> DeepCove Labs Ltd.
> 4th floor 595 Howe Street
> Vancouver, Canada V6C 2T5
> http://tinyurl.com/r7uw4
>
> -----Original Message-----
>
> From: seaside-bounces at lists.squeakfoundation.org
> [mailto:seaside-bounces at lists.squeakfoundation.org] On Behalf Of Boris Popov
> Sent: Wednesday, July 22, 2009 11:44 AM
> To: Seaside - general discussion
>
> Subject: RE: [Seaside] MNU after clean install...
>
> Julian,
>
> Not surprisingly,
>
> Duration
> 0:00:00:00.004
> 0:00:00:00.002
> 0:00:00:00.004
> 0:00:00:00.001
> 0:00:00:00.004
> 0:00:00:00.002
> 0:00:00:00.004
>
> Web Inspector and Firebug both report the bulk of that time spent in Latency
> (Safari term) or Connecting/Waiting for response (Firebug term). I'll try
> this on plain XP tonight to see if it might be a Vista issue.
>
> -Boris
>
> --
> +1.604.689.0322
> DeepCove Labs Ltd.
> 4th floor 595 Howe Street
> Vancouver, Canada V6C 2T5
> http://tinyurl.com/r7uw4
>
>
> -----Original Message-----
> From: seaside-bounces at lists.squeakfoundation.org
> [mailto:seaside-bounces at lists.squeakfoundation.org] On Behalf Of Julian
> Fitzell
> Sent: Wednesday, July 22, 2009 11:21 AM
> To: Seaside - general discussion
> Subject: Re: [Seaside] MNU after clean install...
>
> Not off the top of my head.
>
> The development tools are kind of hard to enable in the 2.9 alphas at
> the moment but try this to get the profiler:
>
> + make sure Seaside-Squeak-Development package is loaded
> + go to the config page
> + click Configure next to your application
> + under Ancestry, the configuration "Application Defaults" should be
> listed; if not, add it
> + click "Application Defaults". This configuration should be inherited
> by all applications by default
> + add WADevelopmentConfiguration to the ancestry
> + click Close
> + click Close
> + start a new session of your application
>
> Now you can click Profile in the toolbar, do a few requests and click
> "stop profiling".  Hopefully the tree view will shed some light on
> where all the time is being spent (it's definitely not slow in my
> image).
>
> Julian
>
> On Wed, Jul 22, 2009 at 9:50 AM, Boris Popov<boris at deepcovelabs.com> wrote:
>> Julian,
>>
>> Thanks, that did the trick. Now, would you have any idea why it might be
>> taking 2,000ms to increment a counter example in this configuration?
>> Seaside 2.8 on VisualWorks averages around 70ms on my machine, so
>> there's got to be something wrong with the setup of Pharo and 2.9a4 on
>> my side... Specific comparison screenshots can be found at
>> http://tinyurl.com/mqsprp
>>
>> Cheers!
>>
>> -Boris
>>
>> --
>> +1.604.689.0322
>> DeepCove Labs Ltd.
>> 4th floor 595 Howe Street
>> Vancouver, Canada V6C 2T5
>> http://tinyurl.com/r7uw4
>>
>>
>> -----Original Message-----
>> From: seaside-bounces at lists.squeakfoundation.org
>> [mailto:seaside-bounces at lists.squeakfoundation.org] On Behalf Of Julian
>> Fitzell
>> Sent: Tuesday, July 21, 2009 11:07 PM
>> To: Seaside - general discussion
>> Subject: Re: [Seaside] MNU after clean install...
>>
>> Indeed. You'll see this problem if you use WAKom to start your
>> adaptor. Nobody noticed because all we're all using the new control
>> panel instead... :)
>>
>> http://code.google.com/p/seaside/issues/detail?id=411
>>
>> This is fixed in Seaside-Adaptors-Comanche-jf.41 if you want to update.
>>
>> Or:
>>  - add a call to #new in WAKom>>defaultCodec and
>> WAKomEncoded>>defaultCodec; or
>>  - use the control panel available in the World->Tools->more... menu
>> to add the instance instead; or
>>  - execute "WAKom default codec: WANullCodec new"
>>
>> Julian
>>
>> On Tue, Jul 21, 2009 at 9:33 PM, Boris Popov<boris at deepcovelabs.com>
>> wrote:
>>> Same here, heh, my first time with pharo too.
>>>
>>> -Boris (via BlackBerry)
>>>
>>> ----- Original Message -----
>>> From: seaside-bounces at lists.squeakfoundation.org
>>> <seaside-bounces at lists.squeakfoundation.org>
>>> To: seaside at lists.squeakfoundation.org
>> <seaside at lists.squeakfoundation.org>
>>> Sent: Tue Jul 21 21:16:34 2009
>>> Subject: [Seaside] MNU after clean install...
>>>
>>> After I perform an install of Seaside 2.9.0a4 on a clean Pharo image,
>>> I start Comanche and when I navigate to the url
>>> (localhost:port/seaside), I receive the following error.
>>> Does anyone else get this error?
>>>
>>> ==========================
>>>
>>> Internal Server Error
>>>
>>> MessageNotUnderstood: WANullCodec class>>url
>>>
>>> ==========================
>>>
>>> Thanks,
>>>
>>> Eric
>>> _______________________________________________
>>> seaside mailing list
>>> seaside at lists.squeakfoundation.org
>>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>>>
>>> _______________________________________________
>>> seaside mailing list
>>> seaside at lists.squeakfoundation.org
>>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>>>
>>>
>> _______________________________________________
>> seaside mailing list
>> seaside at lists.squeakfoundation.org
>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>> _______________________________________________
>> seaside mailing list
>> seaside at lists.squeakfoundation.org
>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>>
> _______________________________________________
> seaside mailing list
> seaside at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> _______________________________________________
> seaside mailing list
> seaside at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
> _______________________________________________
> seaside mailing list
> seaside at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>
>
>
> _______________________________________________
> seaside mailing list
> seaside at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
>
>
_______________________________________________
seaside mailing list
seaside at lists.squeakfoundation.org
http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside