Okay. I increased memory to 40m. That worked.

Thanks,

Je77

On Mon, Mar 19, 2001 at 11:19:41PM -0800, John.Maloney at disney.com wrote:
> Je77,
> 
> You may have run out of memory. StarSqueak uses some 32-bit deep forms that
> scale with the size of the StarSqueak display. If you were close to the edge,
> increasing the scale factor might have put you over the top.
> 
> The fix is to use the "get info" dialog on the Squeak VM to increase the
> desired application memory partition. Then re-start Squeak and see if
> the problem goes away.
> 
> Good luck!                                                                                       
> 
> 	-- John
> 
> 
> At 7:45 PM -0500 3/19/01, Jochen F. Rick wrote:
> >Hi!
> >
> >I was trying out StarSqueak under MacOS.
> >
> >I wanted the thing to be larger, so I set the scale to be 6.
> >When I tried to move the window, Squeak crashed and I got a Mac window 
> >with a stack.
> >
> >This is using MacOS8.6 with and without the StarSqueak plug-in.
> >
> >Peace and Luck!
> >
> >Je77
> 
>