B3DAcceleratorPlugin won't build

Alan Grimes alangrimes at starpower.net
Sat Aug 2 16:32:52 UTC 2003 

om,

Excited that I might finally get a version of squeak's 3D system that 
doesn't crash by the recient list trafic, I did the following:

1.  did "cvs update" in blahblahblah/squeak

2. loaded my experamental immage (one that I keep in 
blahblahblah/squeak/experamental that is mostly clean and used only for 
VM hacking and then retrieved all code updates from both the update 
server and squeak map...

3. Cleaned out blahblahblah/squeak/src and re-generated the VM source.

4. cleaned out the build directory and ran configure.

Since I'm running on a multiprocessor machine I first ran " make -j 2 "
It errored out..

Below is the result of the second run of a normal make:

It is possible that I had made some misguided change to the VM source in 
my immage that is now coming back to haunt me... Is anyone else getting 
this problem?

Can you suggest any tests I should run with my experamental immage?

blahblahblah/configure --disable-B3DAcceleratorPlugin doesn't have any 
effect.

Attached is the configure log

Also of note:  Due to hardware problems I have had to revert to the 
second oldest PCI video card in my vast collection... OpenGL support is 
through MesaGL.

//////////////////////////////////////////////////////////////////////////////////////////////////////////
atg at AlonzoGC:~/source/squeak/bld> make
make[1]: `vm.a' is up to date.
make[1]: `ADPCMCodecPlugin.a' is up to date.
make[1]: `AsynchFilePlugin.a' is up to date.
gcc -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -Wall -Wno-unknown-pragmas 
-g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -I/home/atg/source/squeak/bld 
-I/home/atg/source/squeak/platforms/unix/vm 
-I/home/atg/source/squeak/platforms/Cross/vm -I/usr/X11R6/include 
-DHAVE_CONFIG_H  -DSQUEAK_BUILTIN_PLUGIN -I/home/atg/source/squeak/bld 
-I/home/atg/source/squeak/platforms/unix/vm 
-I/home/atg/source/squeak/platforms/Cross/vm 
-I/home/atg/source/squeak/platforms/Cross/plugins/B3DAcceleratorPlugin 
-I/home/atg/source/squeak/platforms/unix/plugins/B3DAcceleratorPlugin    
-c -o B3DAcceleratorPlugin.o 
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: 
In function `halt':
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:130: 
warning: control reaches end of non-void function
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: 
In function `msg':
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:138: 
warning: control reaches end of non-void function
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: 
In function `primitiveRenderVertexBuffer':
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:536: 
`PrimTypeMax' undeclared (first use in this function)
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:536: 
(Each undeclared identifier is reported only once
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:536: 
for each function it appears in.)
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: 
In function `stackLightArrayValue':
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:949: 
`PrimLightSize' undeclared (first use in this function)
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: 
In function `stackMaterialValue':
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:969: 
`MaterialSize' undeclared (first use in this function)
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: 
In function `stackPrimitiveVertex':
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:1041: 
`PrimVertexSize' undeclared (first use in this function)
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: 
In function `stackPrimitiveVertexArrayofSize':
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:1061: 
`PrimVertexSize' undeclared (first use in this function)
/usr/include/bits/string2.h: At top level:
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:111: 
warning: `fetchLightSourceofObject' defined but not used
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:128: 
warning: `halt' defined but not used
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:136: 
warning: `msg' defined but not used
/home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:1034: 
warning: `stackPrimitiveVertex' defined but not used
make[1]: *** [B3DAcceleratorPlugin.o] Error 1
make: *** [B3DAcceleratorPlugin/B3DAcceleratorPlugin.a] Error 2
atg at AlonzoGC:~/source/squeak/bld>



-------------- next part --------------
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by configure, which was
generated by GNU Autoconf 2.52.  Invocation command line was

  $ ../platforms/unix/config/configure --disable-B3DAccelerator

## ---------- ##
## Platform.  ##
## ---------- ##

hostname = AlonzoGC
uname -m = i686
uname -r = 2.4.21
uname -s = Linux
uname -v = #4 SMP Fri Jun 27 16:23:46 EDT 2003

/usr/bin/uname -p = unknown
/bin/uname -X     = unknown

/bin/arch              = i686
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
hostinfo               = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH = /usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/usr/lib/java/bin:/opt/gnome/bin

## ------------ ##
## Core tests.  ##
## ------------ ##

configure:1133: PATH=".;."; conftest.sh
../platforms/unix/config/configure: conftest.sh: command not found
configure:1136: $? = 127
configure:1165: checking sanity of VMMaker src directory
configure:1183: result: okay
configure:1241: checking build system type
configure:1259: result: i686-pc-linux-gnu
configure:1269: checking host system type
configure:1283: result: i686-pc-linux-gnu
configure:1333: checking whether make sets ${MAKE}
configure:1353: result: yes
configure:1405: checking for gcc
configure:1420: found /usr/bin/gcc
configure:1428: result: gcc
configure:1656: checking for C compiler version
configure:1659: gcc --version </dev/null >&5
gcc (GCC) 3.2.2
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:1662: $? = 0
configure:1664: gcc -v </dev/null >&5
Reading specs from /usr/lib/gcc-lib/athlon-pc-linux-gnu/3.2.2/specs
Configured with: ../gcc-3.2.2/configure --prefix=/usr --host=athlon-pc-linux-gnu
Thread model: posix
gcc version 3.2.2
configure:1667: $? = 0
configure:1669: gcc -V </dev/null >&5
gcc: argument to `-V' is missing
configure:1672: $? = 1
configure:1692: checking for C compiler default output
configure:1695: gcc    conftest.c  >&5
configure:1698: $? = 0
configure:1727: result: a.out
configure:1732: checking whether the C compiler works
configure:1738: ./a.out
configure:1741: $? = 0
configure:1756: result: yes
configure:1763: checking whether we are cross compiling
configure:1765: result: no
configure:1768: checking for executable suffix
configure:1770: gcc -o conftest    conftest.c  >&5
configure:1773: $? = 0
configure:1795: result: 
configure:1801: checking for object suffix
configure:1819: gcc -c   conftest.c >&5
configure:1822: $? = 0
configure:1841: result: o
configure:1845: checking whether we are using the GNU C compiler
configure:1866: gcc -c   conftest.c >&5
configure:1869: $? = 0
configure:1872: test -s conftest.o
configure:1875: $? = 0
configure:1887: result: yes
configure:1893: checking whether gcc accepts -g
configure:1911: gcc -c -g  conftest.c >&5
configure:1914: $? = 0
configure:1917: test -s conftest.o
configure:1920: $? = 0
configure:1930: result: yes
configure:1957: gcc -c -g -O2  conftest.c >&5
conftest.c:2: parse error before "me"
configure:1960: $? = 1
configure: failed program was:
#ifndef __cplusplus
  choke me
#endif
configure:2062: checking for as
configure:2077: found /usr/bin/as
configure:2085: result: as
configure:2092: checking for GNU as
configure:2101: result: yes
configure:2141: checking for ranlib
configure:2156: found /usr/local/bin/ranlib
configure:2165: result: ranlib
configure:2189: checking for a BSD compatible install
configure:2238: result: /usr/bin/ginstall -c
configure:2260: checking for BSD-compatible nm
configure:2296: result: /usr/bin/nm -B
configure:2301: checking for ln
configure:2316: found /bin/ln
configure:2324: result: ln
configure:2333: checking "size of int"
configure:2347: gcc -o conftest -g -O2   conftest.c  >&5
configure:2350: $? = 0
configure:2352: ./conftest
configure:2355: $? = 0
configure:2357: result: "okay"
configure:2372: checking "size of time_t"
configure:2386: gcc -o conftest -g -O2   conftest.c  >&5
configure:2389: $? = 0
configure:2391: ./conftest
configure:2394: $? = 0
configure:2396: result: "okay"
configure:2411: checking "size of double"
configure:2425: gcc -o conftest -g -O2   conftest.c  >&5
configure:2428: $? = 0
configure:2430: ./conftest
configure:2433: $? = 0
configure:2435: result: "okay"
configure:2450: checking for 64-bit integer type
configure:2466: gcc -o conftest -g -O2   conftest.c  >&5
configure:2469: $? = 0
configure:2471: ./conftest
configure:2474: $? = 1
configure: program exited with status 1
configure: failed program was:
#line 2461 "configure"
#include "confdefs.h"
int main(){return(sizeof(long) == 8)?0:1;}
configure:2492: gcc -o conftest -g -O2   conftest.c  >&5
configure:2495: $? = 0
configure:2497: ./conftest
configure:2500: $? = 0
configure:2515: result: long long
configure:2606: checking for ld used by GCC
configure:2669: result: /usr/bin/ld
configure:2678: checking if the linker (/usr/bin/ld) is GNU ld
GNU ld version 2.13.2.1
configure:2690: result: yes
configure:2694: checking for /usr/bin/ld option to reload object files
configure:2701: result: -r
configure:2706: checking for a sed that does not truncate output
configure:2788: result: /usr/bin/sed
configure:2791: checking whether ln -s works
configure:2795: result: yes
configure:2802: checking how to recognise dependent libraries
configure:2983: result: pass_all
configure:2989: checking command to parse /usr/bin/nm -B output
configure:3073: gcc -c -g -O2  conftest.c >&5
configure:3076: $? = 0
configure:3080: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ 	]\([ABCDGISTW][ABCDGISTW]*\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' \> conftest.nm
configure:3083: $? = 0
configure:3135: gcc -o conftest -g -O2   conftest.c conftstm.o >&5
configure:3138: $? = 0
configure:3182: result: ok
configure:3191: checking how to run the C preprocessor
configure:3217: gcc -E  conftest.c
configure:3223: $? = 0
configure:3250: gcc -E  conftest.c
configure:3247:28: ac_nonexistent.h: No such file or directory
configure:3256: $? = 1
configure: failed program was:
#line 3246 "configure"
#include "confdefs.h"
#include <ac_nonexistent.h>
configure:3293: result: gcc -E
configure:3308: gcc -E  conftest.c
configure:3314: $? = 0
configure:3341: gcc -E  conftest.c
configure:3338:28: ac_nonexistent.h: No such file or directory
configure:3347: $? = 1
configure: failed program was:
#line 3337 "configure"
#include "confdefs.h"
#include <ac_nonexistent.h>
configure:3389: checking for dlfcn.h
configure:3399: gcc -E  conftest.c
configure:3405: $? = 0
configure:3424: result: yes
configure:3611: checking for ranlib
configure:3635: result: ranlib
configure:3685: checking for strip
configure:3700: found /usr/bin/strip
configure:3709: result: strip
configure:3911: checking for objdir
configure:3922: result: .libs
configure:3937: checking for gcc option to produce PIC
configure:4083: result: -fPIC
configure:4087: checking if gcc PIC flag -fPIC works
configure:4107: gcc -c -g -O2 -fPIC -DPIC  conftest.c >&5
configure:4110: $? = 0
configure:4113: test -s conftest.o
configure:4116: $? = 0
configure:4152: result: yes
configure:4168: checking if gcc static flag -static works
configure:4189: gcc -o conftest -g -O2   -static conftest.c  >&5
configure:4192: $? = 0
configure:4195: test -s conftest
configure:4198: $? = 0
configure:4212: result: yes
configure:4223: checking if gcc supports -c -o file.o
configure:4243: gcc -c -g -O2 -o out/conftest2.o  conftest.c >&5
configure:4267: result: yes
configure:4272: checking if gcc supports -c -o file.lo
configure:4296: gcc -c -g -O2 -c -o conftest.lo  conftest.c >&5
configure:4299: $? = 0
configure:4302: test -s conftest.lo
configure:4305: $? = 0
configure:4326: result: yes
configure:4357: checking if gcc supports -fno-rtti -fno-exceptions
configure:4376: gcc -c -g -O2 -fno-rtti -fno-exceptions -c conftest.c  conftest.c >&5
configure:4379: $? = 0
configure:4382: test -s conftest.o
configure:4385: $? = 0
configure:4401: result: yes
configure:4412: checking whether the linker (/usr/bin/ld) supports shared libraries
configure:5107: result: yes
configure:5112: checking how to hardcode library paths into programs
configure:5136: result: immediate
configure:5141: checking whether stripping libraries is possible
configure:5146: result: yes
configure:5157: checking dynamic linker characteristics
configure:5564: result: GNU/Linux ld.so
configure:5569: checking if libtool supports shared libraries
configure:5571: result: yes
configure:5574: checking whether to build shared libraries
configure:5595: result: yes
configure:5598: checking whether to build static libraries
configure:5602: result: no
configure:6220: checking whether -lc should be explicitly linked in
configure:6228: gcc -c -g -O2  conftest.c >&5
configure:6231: $? = 0
configure:6245: gcc -shared conftest.o  -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep  -lc  \>/dev/null 2\>\&1
configure:6248: $? = 0
configure:6261: result: no
configure:6842: checking for ANSI C header files
configure:6856: gcc -E  conftest.c
configure:6862: $? = 0
configure:6949: gcc -o conftest -g -O2   conftest.c  >&5
configure:6952: $? = 0
configure:6954: ./conftest
configure:6957: $? = 0
configure:6970: result: yes
configure:6983: checking for unistd.h
configure:6993: gcc -E  conftest.c
configure:6999: $? = 0
configure:7018: result: yes
configure:6983: checking for string.h
configure:6993: gcc -E  conftest.c
configure:6999: $? = 0
configure:7018: result: yes
configure:6983: checking for fcntl.h
configure:6993: gcc -E  conftest.c
configure:6999: $? = 0
configure:7018: result: yes
configure:6983: checking for sys/file.h
configure:6993: gcc -E  conftest.c
configure:6999: $? = 0
configure:7018: result: yes
configure:6983: checking for sys/param.h
configure:6993: gcc -E  conftest.c
configure:6999: $? = 0
configure:7018: result: yes
configure:7031: checking for sys/time.h
configure:7041: gcc -E  conftest.c
configure:7047: $? = 0
configure:7066: result: yes
configure:7031: checking for sys/filio.h
configure:7041: gcc -E  conftest.c
configure:7038:23: sys/filio.h: No such file or directory
configure:7047: $? = 1
configure: failed program was:
#line 7037 "configure"
#include "confdefs.h"
#include <sys/filio.h>
configure:7066: result: no
configure:7031: checking for sys/select.h
configure:7041: gcc -E  conftest.c
configure:7047: $? = 0
configure:7066: result: yes
configure:7076: checking whether time.h and sys/time.h may both be included
configure:7098: gcc -c -g -O2  conftest.c >&5
configure:7101: $? = 0
configure:7104: test -s conftest.o
configure:7107: $? = 0
configure:7117: result: yes
configure:7130: checking for dirent.h that defines DIR
configure:7151: gcc -c -g -O2  conftest.c >&5
configure:7154: $? = 0
configure:7157: test -s conftest.o
configure:7160: $? = 0
configure:7170: result: yes
configure:7183: checking for opendir in -ldir
configure:7210: gcc -o conftest -g -O2   conftest.c -ldir   >&5
/usr/bin/ld: cannot find -ldir
collect2: ld returned 1 exit status
configure:7213: $? = 1
configure: failed program was:
#line 7191 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char opendir ();
int
main ()
{
opendir ();
  ;
  return 0;
}
configure:7230: result: no
configure:7292: checking whether struct tm is in sys/time.h or time.h
configure:7312: gcc -c -g -O2  conftest.c >&5
configure:7315: $? = 0
configure:7318: test -s conftest.o
configure:7321: $? = 0
configure:7331: result: time.h
configure:7341: checking for struct tm.tm_zone
configure:7363: gcc -c -g -O2  conftest.c >&5
configure:7366: $? = 0
configure:7369: test -s conftest.o
configure:7372: $? = 0
configure:7382: result: yes
configure:7451: checking for socklen_t in sys/socket.h
configure:7469: gcc -c -g -O2  conftest.c >&5
configure:7472: $? = 0
configure:7475: test -s conftest.o
configure:7478: $? = 0
configure:7488: result: yes
configure:7494: checking for atexit or on_exit
configure:7512: gcc -c -g -O2  conftest.c >&5
configure:7515: $? = 0
configure:7518: test -s conftest.o
configure:7521: $? = 0
configure:7561: result: atexit
configure:7569: checking for tzset
configure:7587: gcc -c -g -O2  conftest.c >&5
configure:7590: $? = 0
configure:7593: test -s conftest.o
configure:7596: $? = 0
configure:7606: result: yes
configure:7612: checking for gmtoff in struct tm
configure:7630: gcc -c -g -O2  conftest.c >&5
configure:7633: $? = 0
configure:7636: test -s conftest.o
configure:7639: $? = 0
configure:7649: result: yes
configure:7655: checking for timezone and daylight variables
configure:7673: gcc -c -g -O2  conftest.c >&5
configure:7676: $? = 0
configure:7679: test -s conftest.o
configure:7682: $? = 0
configure:7692: result: yes
configure:7698: checking for gethostname in unistd.h
configure:7716: gcc -c -g -O2  conftest.c >&5
configure:7719: $? = 0
configure:7722: test -s conftest.o
configure:7725: $? = 0
configure:7735: result: yes
configure:7757: checking for yp_bind in -lnsl
configure:7784: gcc -o conftest -g -O2   conftest.c -lnsl   >&5
configure:7787: $? = 0
configure:7790: test -s conftest
configure:7793: $? = 0
configure:7804: result: yes
configure:7815: checking for socket in -lsocket
configure:7842: gcc -o conftest -g -O2   conftest.c -lsocket  -lnsl  >&5
/usr/bin/ld: cannot find -lsocket
collect2: ld returned 1 exit status
configure:7845: $? = 1
configure: failed program was:
#line 7823 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char socket ();
int
main ()
{
socket ();
  ;
  return 0;
}
configure:7862: result: no
configure:7873: checking for sin in -lm
configure:7900: gcc -o conftest -g -O2   conftest.c -lm  -lnsl  >&5
configure:7889: warning: conflicting types for built-in function `sin'
configure:7903: $? = 0
configure:7906: test -s conftest
configure:7909: $? = 0
configure:7920: result: yes
configure:7934: checking for dlfcn.h
configure:7969: result: yes
configure:7979: checking for dlopen
configure:8016: gcc -o conftest -g -O2   conftest.c -lm -lnsl  >&5
/tmp/cc8WEQ3p.o: In function `main':
/home/atg/source/squeak/bld/configure:8007: undefined reference to `dlopen'
collect2: ld returned 1 exit status
configure:8019: $? = 1
configure: failed program was:
#line 7985 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char dlopen (); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char dlopen ();
char (*f) ();

int
main ()
{
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_dlopen) || defined (__stub___dlopen)
choke me
#else
f = dlopen;
#endif

  ;
  return 0;
}
configure:8035: result: no
configure:8045: checking for dlopen in -ldl
configure:8072: gcc -o conftest -g -O2   conftest.c -ldl  -lm -lnsl  >&5
configure:8075: $? = 0
configure:8078: test -s conftest
configure:8081: $? = 0
configure:8092: result: yes
configure:8176: checking for snprintf
configure:8213: gcc -o conftest -g -O2   conftest.c -ldl -lm -lnsl  >&5
configure:8216: $? = 0
configure:8219: test -s conftest
configure:8222: $? = 0
configure:8232: result: yes
configure:8248: checking for sys/types.h
configure:8260: gcc -c -g -O2  conftest.c >&5
configure:8263: $? = 0
configure:8266: test -s conftest.o
configure:8269: $? = 0
configure:8279: result: yes
configure:8248: checking for sys/stat.h
configure:8260: gcc -c -g -O2  conftest.c >&5
configure:8263: $? = 0
configure:8266: test -s conftest.o
configure:8269: $? = 0
configure:8279: result: yes
configure:8248: checking for stdlib.h
configure:8260: gcc -c -g -O2  conftest.c >&5
configure:8263: $? = 0
configure:8266: test -s conftest.o
configure:8269: $? = 0
configure:8279: result: yes
configure:8248: checking for string.h
configure:8279: result: yes
configure:8248: checking for memory.h
configure:8260: gcc -c -g -O2  conftest.c >&5
configure:8263: $? = 0
configure:8266: test -s conftest.o
configure:8269: $? = 0
configure:8279: result: yes
configure:8248: checking for strings.h
configure:8260: gcc -c -g -O2  conftest.c >&5
configure:8263: $? = 0
configure:8266: test -s conftest.o
configure:8269: $? = 0
configure:8279: result: yes
configure:8248: checking for inttypes.h
configure:8260: gcc -c -g -O2  conftest.c >&5
configure:8263: $? = 0
configure:8266: test -s conftest.o
configure:8269: $? = 0
configure:8279: result: yes
configure:8248: checking for stdint.h
configure:8260: gcc -c -g -O2  conftest.c >&5
configure:8263: $? = 0
configure:8266: test -s conftest.o
configure:8269: $? = 0
configure:8279: result: yes
configure:8248: checking for unistd.h
configure:8279: result: yes
configure:8292: checking for stdlib.h
configure:8327: result: yes
configure:8292: checking for unistd.h
configure:8327: result: yes
configure:8340: checking for getpagesize
configure:8377: gcc -o conftest -g -O2   conftest.c -ldl -lm -lnsl  >&5
configure:8380: $? = 0
configure:8383: test -s conftest
configure:8386: $? = 0
configure:8396: result: yes
configure:8406: checking for working mmap
configure:8542: gcc -o conftest -g -O2   conftest.c -ldl -lm -lnsl  >&5
configure:8545: $? = 0
configure:8547: ./conftest
configure:8550: $? = 0
configure:8562: result: yes
configure:8582: checking for i686 optimization flags
configure:8600: result: "-fomit-frame-pointer"
configure:8609: checking for mawk
configure:8635: result: no
configure:8609: checking for gawk
configure:8624: found /usr/bin/gawk
configure:8632: result: gawk
configure:8642: checking whether we can gnuify interp.c
configure:8660: result: yes
configure:8669: checking for prefix to use for loadable modules
configure:8680: result: (none)
configure:8687: checking for compiler flags to force 32-bit addresses
configure:8695: result: 
configure:8700: checking whether byte ordering is bigendian
configure:8725: gcc -c  -g -O2 -fomit-frame-pointer  conftest.c >&5
configure:8728: $? = 0
configure:8731: test -s conftest.o
configure:8734: $? = 0
configure:8755: gcc -c  -g -O2 -fomit-frame-pointer  conftest.c >&5
configure: In function `main':
configure:8746: `not' undeclared (first use in this function)
configure:8746: (Each undeclared identifier is reported only once
configure:8746: for each function it appears in.)
configure:8746: parse error before "big"
configure:8758: $? = 1
configure: failed program was:
#line 8738 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>

int
main ()
{
#if BYTE_ORDER != BIG_ENDIAN
 not big endian
#endif

  ;
  return 0;
}
configure:8822: result: no
configure:8835: checking whether misaligned access to doubles is ok
configure:8852: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -ldl -lm -lnsl  >&5
configure: In function `main':
configure:8848: warning: passing arg 1 of `f' makes integer from pointer without a cast
configure:8855: $? = 0
configure:8857: ./conftest
configure:8860: $? = 0
configure:8872: result: yes
configure:8878: checking whether doubles are stored in Squeak order
configure:8899: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -ldl -lm -lnsl  >&5
configure: In function `main':
configure:8892: warning: no semicolon at end of struct or union
configure:8892: parse error before "sizeof"
configure: At top level:
configure:8892: warning: data definition has no type or storage class
configure:8893: parse error before '.' token
configure:8902: $? = 1
configure: program exited with status 1
configure: failed program was:
#line 8889 "configure"
#include "confdefs.h"
 main()
	  {
		union { double d; int i sizeof(double) / sizeof(int) ; } d;
		d.d = 1.0;
		return d.i0 == 0;
	  }
configure:8919: result: no
configure:9074: result: ******** disabling vm-display-Quartz
configure:9106: checking for X
configure:9315: result: libraries /usr/X11R6/lib, headers /usr/X11R6/include
configure:9454: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -ldl -lm -lnsl   -L/usr/X11R6/lib -lX11 >&5
configure:9457: $? = 0
configure:9460: test -s conftest
configure:9463: $? = 0
configure:9589: checking for gethostbyname
configure:9626: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -ldl -lm -lnsl  >&5
configure:9629: $? = 0
configure:9632: test -s conftest
configure:9635: $? = 0
configure:9645: result: yes
configure:9766: checking for connect
configure:9803: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -ldl -lm -lnsl  >&5
configure:9806: $? = 0
configure:9809: test -s conftest
configure:9812: $? = 0
configure:9822: result: yes
configure:9882: checking for remove
configure:9919: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -ldl -lm -lnsl  >&5
configure:9922: $? = 0
configure:9925: test -s conftest
configure:9928: $? = 0
configure:9938: result: yes
configure:9998: checking for shmat
configure:10035: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -ldl -lm -lnsl  >&5
configure:10038: $? = 0
configure:10041: test -s conftest
configure:10044: $? = 0
configure:10054: result: yes
configure:10123: checking for IceConnectionNumber in -lICE
configure:10150: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   -L/usr/X11R6/lib conftest.c -lICE  -ldl -lm -lnsl  >&5
configure:10153: $? = 0
configure:10156: test -s conftest
configure:10159: $? = 0
configure:10170: result: yes
configure:10189: checking for XOpenDisplay in -lX11
configure:10216: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1  -I/usr/X11R6/include  conftest.c -lX11   -lSM -lICE  -L/usr/X11R6/lib  -ldl -lm -lnsl  >&5
configure:10219: $? = 0
configure:10222: test -s conftest
configure:10225: $? = 0
configure:10236: result: yes
configure:10246: checking for XShmAttach in -lXext
configure:10273: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1  -I/usr/X11R6/include  conftest.c -lXext   -lSM -lICE  -L/usr/X11R6/lib  -ldl -lm -lnsl  -lX11 >&5
configure:10276: $? = 0
configure:10279: test -s conftest
configure:10282: $? = 0
configure:10293: result: yes
configure:10309: checking for GL/gl.h
configure:10319: gcc -E  -I/usr/X11R6/include conftest.c
configure:10325: $? = 0
configure:10344: result: yes
configure:10356: checking for glIsEnabled in -lGL
configure:10383: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1  -I/usr/X11R6/include  conftest.c -lGL  -lXext  -lSM -lICE  -L/usr/X11R6/lib  -ldl -lm -lnsl  -lX11 >&5
configure:10386: $? = 0
configure:10389: test -s conftest
configure:10392: $? = 0
configure:10403: result: yes
configure:10456: checking for Mac OS X CoreAudio
configure:10471: gcc -c  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1  conftest.c >&5
configure:10460:33: CoreAudio/CoreAudio.h: No such file or directory
configure: In function `main':
configure:10464: `kAudioHardwareNoError' undeclared (first use in this function)
configure:10464: (Each undeclared identifier is reported only once
configure:10464: for each function it appears in.)
configure:10474: $? = 1
configure: failed program was:
#line 10459 "configure"
#include "confdefs.h"
#include <CoreAudio/CoreAudio.h>
int
main ()
{
kAudioHardwareNoError;
  ;
  return 0;
}
configure:10490: result: no
configure:10493: result: ******** disabling vm-sound-MacOSX
configure:10511: checking for Network Audio System
configure:10526: gcc -c  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1  conftest.c >&5
configure:10515:25: audio/audio.h: No such file or directory
configure: In function `main':
configure:10519: `AuElementNotifyKindLowWater' undeclared (first use in this function)
configure:10519: (Each undeclared identifier is reported only once
configure:10519: for each function it appears in.)
configure:10529: $? = 1
configure: failed program was:
#line 10514 "configure"
#include "confdefs.h"
#include <audio/audio.h>
int
main ()
{
AuElementNotifyKindLowWater;
  ;
  return 0;
}
configure:10545: result: no
configure:10548: result: ******** disabling vm-sound-NAS
configure:10566: checking for Open Sound System
configure:10581: gcc -c  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1  conftest.c >&5
configure:10584: $? = 0
configure:10587: test -s conftest.o
configure:10590: $? = 0
configure:10593: result: yes
configure:10621: checking for SunOS/Solaris audio
configure:10636: gcc -c  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1  conftest.c >&5
configure:10625:25: sys/audioio.h: No such file or directory
configure: In function `main':
configure:10629: `AUDIO_SUNVTS' undeclared (first use in this function)
configure:10629: (Each undeclared identifier is reported only once
configure:10629: for each function it appears in.)
configure:10639: $? = 1
configure: failed program was:
#line 10624 "configure"
#include "confdefs.h"
#include <sys/audioio.h>
int
main ()
{
AUDIO_SUNVTS;
  ;
  return 0;
}
configure:10671: gcc -c  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1  conftest.c >&5
configure:10660:25: sun/audioio.h: No such file or directory
configure: In function `main':
configure:10664: `AUDIO_SUNVTS' undeclared (first use in this function)
configure:10664: (Each undeclared identifier is reported only once
configure:10664: for each function it appears in.)
configure:10674: $? = 1
configure: failed program was:
#line 10659 "configure"
#include "confdefs.h"
#include <sun/audioio.h>
int
main ()
{
AUDIO_SUNVTS;
  ;
  return 0;
}
configure:10693: result: no
configure:10696: result: ******** disabling vm-sound-Sun
configure:10719: checking for iconv.h
configure:10729: gcc -E  conftest.c
configure:10735: $? = 0
configure:10754: result: yes
configure:10764: checking for iconv_open in -liconv
configure:10791: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -liconv  -ldl -lm -lnsl  >&5
/usr/bin/ld: cannot find -liconv
collect2: ld returned 1 exit status
configure:10794: $? = 1
configure: failed program was:
#line 10772 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char iconv_open ();
int
main ()
{
iconv_open ();
  ;
  return 0;
}
configure:10811: result: no
configure:10817: checking for libiconv_open in -liconv
configure:10844: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -liconv  -ldl -lm -lnsl  >&5
/usr/bin/ld: cannot find -liconv
collect2: ld returned 1 exit status
configure:10847: $? = 1
configure: failed program was:
#line 10825 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char libiconv_open ();
int
main ()
{
libiconv_open ();
  ;
  return 0;
}
configure:10864: result: no
configure:10878: checking for nl_langinfo and CODESET
configure:10896: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -ldl -lm -lnsl  >&5
configure:10899: $? = 0
configure:10902: test -s conftest
configure:10905: $? = 0
configure:10916: result: yes
configure:10989: checking for Objective C support
configure:10998: result: no
configure:11001: result: ******** disabling ObjectiveCPlugin
configure:11020: checking for util.h
configure:11030: gcc -E  conftest.c
configure:11027:18: util.h: No such file or directory
configure:11036: $? = 1
configure: failed program was:
#line 11026 "configure"
#include "confdefs.h"
#include <util.h>
configure:11055: result: no
configure:11020: checking for libutil.h
configure:11030: gcc -E  conftest.c
configure:11027:21: libutil.h: No such file or directory
configure:11036: $? = 1
configure: failed program was:
#line 11026 "configure"
#include "confdefs.h"
#include <libutil.h>
configure:11055: result: no
configure:11020: checking for pty.h
configure:11030: gcc -E  conftest.c
configure:11036: $? = 0
configure:11055: result: yes
configure:11020: checking for stropts.h
configure:11030: gcc -E  conftest.c
configure:11036: $? = 0
configure:11055: result: yes
configure:11065: checking for library containing openpty
configure:11092: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -ldl -lm -lnsl  >&5
/tmp/ccEc3uET.o: In function `main':
/home/atg/source/squeak/bld/configure:11085: undefined reference to `openpty'
collect2: ld returned 1 exit status
configure:11095: $? = 1
configure: failed program was:
#line 11073 "configure"
#include "confdefs.h"

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char openpty ();
int
main ()
{
openpty ();
  ;
  return 0;
}
configure:11132: gcc -o conftest  -g -O2 -fomit-frame-pointer -DLSB_FIRST=1   conftest.c -lutil  -ldl -lm -lnsl  >&5
configure:11135: $? = 0
configure:11138: test -s conftest
configure:11141: $? = 0
configure:11154: result: -lutil
configure:11243: checking for FFI support
configure:11251: result: x86-sysv
configure:11379: checking for XOpenDisplay in -lX11
configure:11426: result: yes
configure:11548: creating ./config.status

## ----------------------- ##
## Running config.status.  ##
## ----------------------- ##

This file was extended by config.status 2.52, executed with
  CONFIG_FILES    = 
  CONFIG_HEADERS  = 
  CONFIG_LINKS    = 
  CONFIG_COMMANDS = 
  > ./config.status 
on AlonzoGC

config.status:12074: creating mkconfig
config.status:12074: creating make.cfg
config.status:12074: creating make.int
config.status:12074: creating make.ext
config.status:12074: creating make.prg
config.status:12074: creating inisqueak
config.status:12074: creating Makefile
config.status:12166: creating config.h

## ----------------- ##
## Cache variables.  ##
## ----------------- ##

ac_cv_atexit=atexit
ac_cv_build=i686-pc-linux-gnu
ac_cv_build_alias=i686-pc-linux-gnu
ac_cv_c_bigendian=no
ac_cv_c_compiler_gnu=yes
ac_cv_double_align=yes
ac_cv_double_order=no
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_func_connect=yes
ac_cv_func_dlopen=no
ac_cv_func_gethostbyname=yes
ac_cv_func_getpagesize=yes
ac_cv_func_mmap_fixed_mapped=yes
ac_cv_func_remove=yes
ac_cv_func_shmat=yes
ac_cv_func_snprintf=yes
ac_cv_gethostname_p=yes
ac_cv_have_x=$'have_x=yes \t\tac_x_includes=/usr/X11R6/include ac_x_libraries=/usr/X11R6/lib'
ac_cv_header_GL_gl_h=yes
ac_cv_header_dirent_dirent_h=yes
ac_cv_header_dlfcn_h=yes
ac_cv_header_fcntl_h=yes
ac_cv_header_iconv_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_libutil_h=no
ac_cv_header_memory_h=yes
ac_cv_header_pty_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_stropts_h=yes
ac_cv_header_sys_file_h=yes
ac_cv_header_sys_filio_h=no
ac_cv_header_sys_param_h=yes
ac_cv_header_sys_select_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_time_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_time=yes
ac_cv_header_unistd_h=yes
ac_cv_header_util_h=no
ac_cv_host=i686-pc-linux-gnu
ac_cv_host_alias=i686-pc-linux-gnu
ac_cv_iconv=no
ac_cv_int64_t=$'long long'
ac_cv_langinfo_codeset=yes
ac_cv_lib_GL_glIsEnabled=yes
ac_cv_lib_ICE_IceConnectionNumber=yes
ac_cv_lib_X11_XOpenDisplay=yes
ac_cv_lib_Xext_XShmAttach=yes
ac_cv_lib_dir_opendir=no
ac_cv_lib_dl_dlopen=yes
ac_cv_lib_iconv_iconv_open=no
ac_cv_lib_iconv_libiconv_open=no
ac_cv_lib_m_sin=yes
ac_cv_lib_nsl_yp_bind=yes
ac_cv_lib_socket_socket=no
ac_cv_member_struct_tm_tm_zone=yes
ac_cv_module_prefix=$'(none)'
ac_cv_objext=o
ac_cv_path_install=$'/usr/bin/ginstall -c'
ac_cv_prog_AS=as
ac_cv_prog_AWK=gawk
ac_cv_prog_CPP=$'gcc -E'
ac_cv_prog_LN=ln
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_cc_g=yes
ac_cv_prog_make_make_set=yes
ac_cv_search_openpty=-lutil
ac_cv_socklen_t=yes
ac_cv_struct_tm=time.h
ac_cv_timezone=yes
ac_cv_tm_gmtoff=yes
ac_cv_tzset=yes
lt_cv_archive_cmds_need_lc=no
lt_cv_compiler_c_o=yes
lt_cv_compiler_o_lo=yes
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd=$'$MAGIC_CMD'
lt_cv_file_magic_test_file=$'/lib/libc.so.6 /lib/libc-2.3.1.so'
lt_cv_global_symbol_to_c_name_address=$'sed -n -e \'s/^: \\([^ ]*\\) $/  {\\"\\1\\", (lt_ptr) 0},/p\' -e \'s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)$/  {"\\2", (lt_ptr) \\&\\2},/p\''
lt_cv_global_symbol_to_cdecl=$'sed -n -e \'s/^. .* \\(.*\\)$/extern char \\1;/p\''
lt_cv_ld_reload_flag=-r
lt_cv_path_LD=/usr/bin/ld
lt_cv_path_NM=$'/usr/bin/nm -B'
lt_cv_path_SED=/usr/bin/sed
lt_cv_prog_cc_can_build_shared=yes
lt_cv_prog_cc_no_builtin=
lt_cv_prog_cc_pic=$' -fPIC'
lt_cv_prog_cc_pic_works=yes
lt_cv_prog_cc_shlib=
lt_cv_prog_cc_static=-static
lt_cv_prog_cc_static_works=yes
lt_cv_prog_cc_wl=-Wl,
lt_cv_prog_gnu_ld=yes
lt_cv_sys_global_symbol_pipe=$'sed -n -e \'s/^.*[ \t]\\([ABCDGISTW][ABCDGISTW]*\\)[ \t][ \t]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)$/\\1 \\2\\3 \\3/p\''
lt_cv_sys_path_separator=:

## ------------ ##
## confdefs.h.  ##
## ------------ ##

#define SQ_VERSION "3.2t-369"
#define VM_VERSION "3.5-1devel"
#define OS_TYPE "unix"
#define VM_HOST "i686-pc-linux-gnu"
#define VM_HOST_OS "linux-gnu"
#define VM_HOST_CPU "i686"
#define squeakInt64 long long
#define HAVE_DLFCN_H 1
#define STDC_HEADERS 1
#define HAVE_UNISTD_H 1
#define HAVE_STRING_H 1
#define HAVE_FCNTL_H 1
#define HAVE_SYS_FILE_H 1
#define HAVE_SYS_PARAM_H 1
#define HAVE_SYS_TIME_H 1
#define HAVE_SYS_SELECT_H 1
#define TIME_WITH_SYS_TIME 1
#define HAVE_DIRENT_H 1
#define HAVE_STRUCT_TM_TM_ZONE 1
#define HAVE_TM_ZONE 1
#define AT_EXIT atexit
#define HAVE_TZSET 1
#define HAVE_TM_GMTOFF 1
#define HAVE_TIMEZONE 1
#define HAVE_LIBNSL 1
#define HAVE_LIBM 1
#define HAVE_DLFCN_H 1
#define HAVE_LIBDL 1
#define HAVE_SNPRINTF 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_STDLIB_H 1
#define HAVE_UNISTD_H 1
#define HAVE_GETPAGESIZE 1
#define HAVE_MMAP 1
#define VM_MODULE_PREFIX ""
#define DOUBLE_WORD_ORDER 1
#define SQ_LIBDIR "/usr/local/lib/squeak/3.2t-369"
#define VM_LIBDIR "/usr/local/lib/squeak/3.5-1devel"
#define USE_X11 1
#define HAVE_LIBXEXT 1
#define HAVE_GL_GL_H 1
#define USE_X11_GLX 1
#define HAVE_LIBGL 1
#define HAVE_ICONV_H 1
#define HAVE_LANGINFO_CODESET 1
#define HAVE_PTY_H 1
#define HAVE_STROPTS_H 1
#define HAVE_OPENPTY 1


configure: exit 0

More information about the Squeak-dev mailing list