Vm-dev April 2015

vm-dev@lists.squeakfoundation.org

45 participants
264 discussions

ffi-test-main.c fails on FreeBSD
by Gary Dunn 12 Aug '16

12 Aug '16

In conjunction with getting Open Cobalt running on FreeBSD I have been looking into the problems with SqueakFFIPrims on FreeBSD and have reached a point that is beyond my understanding. I am not sure if the fix should come from the VM side or the FreeBSD port maintainer. I needed to get source code back into the ports tree so I did a make in /usr/ports/lang/squeak. I already had the 3.9 tarball, so that just repopulated the source and did the initial build. In the "files" folder I found patch files typical for a FreeBSD port. These patch source files from a generic tarball to work with FreeBSD. The one of interest was patch-platforms__unix__plugins__SqueakFFIPrims__ffi-config which contains ----x-----x----- --- platforms/unix/plugins/SqueakFFIPrims/ffi-config.org Wed Apr 26 20:27:53 2006 +++ platforms/unix/plugins/SqueakFFIPrims/ffi-config Wed Apr 26 20:29:00 2006 @@ -39,6 +39,7 @@ case ${abi} in linux) abi=sysv;; + freebsd*) abi=sysv;; darwin*) abi=darwin;; *) abi=libffi; lib="-lffi";; esac -----x-----x----- I then had the folder work/Squeak-3.9-7/platforms/unix/plugins/SqueakFFIPrims In it is a file 00README which explains how to test FFI. It says to run ffi-test-config but I have no such file. It says to type "make" to build a test suite but the build failed. It says to try with make CPU=any ABI=libffi LIB=-lffi which also failed. I traced the problem to the gcc search paths for includes and libraries -- turns out FreeBSD only searches /usr/include and /usr/lib when the required files are in /usr/local/include and /usr/local/lib. After some fiddling I finally had a "main" to test. It failed: ffi-test-main.c failed at line 361. Here is a bit from that file, ending with line 361: ffiInitialize(); for (ul= 0; ul < 15; ++ul) ffiPushSingleFloat(fa[ul]); GO(FFITypeSingleFloat, many); f= ffiReturnFloatValue(); ffiCleanup(); CHECK(f - ff < FLT_EPSILON); I worked out the CHECK macro but could not find what FLT_EPSILON is. At that point I decided to stop and come to you for help. Where do I go from here? -- Gary Dunn, Honolulu osp(a)aloha.com http://openslate.net/ http://e9erust.blogspot.com/ Sent from Slate001

5 8

VM Recipe: How to build an interpreter VM on Linux
by David T. Lewis 07 Feb '16

07 Feb '16

How to build an interpreter VM from source on a typical Linux or Unix system: Install development tools for your Linux system (32-bit libraries are not required). Install CMake, either from your Linux distribution or from www.cmake.org Install Subversion, either from your Linux distributiion or from https://subversion.apache.org/ Make a new, empty, directory for your work. In that directory, download the full platforms sources from the Subversion repository. Download everything, whether you need it or not. The Subversion directory information will be used in the build process, so do not cut corners to save space. $ svn co http://squeakvm.org/svn/squeak/trunk/platforms Also in the new directory, download the generated sources. This is an up to date copy of source files generated from the Smalltalk source code in VMMaker. You can generate them yourself by loading VMMaker, but using the files from the Subversion repository is a faster way to get started. $ svn co http://squeakvm.org/svn/squeak/trunk/src You will now have ./platforms and ./src directories with the latest source code for the VM. Make another subdirectory called ./build that you will use to build the VM. $ mkdir build Change to the build directory. $ cd build Copy the example Makefile into your build directory. $ cp ../platforms/unix/cmake/Makefile.example Makefile Build the VM $ make Install the VM $ sudo make install You now have a VM that runs that classic Squeak image formats, including the 64-bit version (see http://build.squeak.org/job/Squeak%2064-bit%20image/). This is a traditional context interpreter VM. It will not run the latest high performance Spur image formats. Please refer to the Cog and Spur VM development at http://www.mirandabanda.org/cogblog/ and http://www.mirandabanda.org/files/Cog/VM/ for the latest Cog and Spur VM development, and for VMs that support the new Spur image formats. Dave

5 7

Re: [squeak-dev] vm crash from BalloonEngine (maybe B2DPlugin or BitBltPlugin)
by Nicolai Hess 06 Jan '16

06 Jan '16

2015-04-08 20:02 GMT+02:00 karl ramberg <karlramberg(a)gmail.com>: > Confirmed. > > Karl > > On Wed, Apr 8, 2015 at 5:33 PM, Nicolai Hess <nicolaihess(a)web.de> wrote: > >> In order to reproduce it, draw a rectangle with radial gradient fill, >> with direction >> and normal, both of length 1. >> > This is not the reason why it crashes. It happens for other values as well: |form canvas fill direction normal| direction := 4@0. normal := 0@2. form := Form extent:300@300 depth:32. canvas := form getCanvas. fill := GradientFillStyle new colorRamp:{0 -> Color white . 0.5 -> Color green . 1 -> Color blue};origin:400@400 ;direction:direction;normal:normal;radial:true;yourself. canvas fillRectangle: (0@0 extent:800@800) fillStyle: fill. Display getCanvas drawImage: form at: 300@300 This uses a different value for direction and normal and the fill is defined for a larger area (800x800) -> CRASH Maybe, this is a rare bug, because, normally you don't create a small gradient t o fill a large area. But a vm crash is not nice, I would like to get this fixed. I am not sure what is the exact cause, but it may come from a signed integer overflwo, It looks like Balloon uses fixed point arithmetik (binary scaling). This fixed point representation (16.16 bit fixed point represented in a 32 integer) tend to overflow, especially for operations like computing the squared length of a vector x*x+y*y -> overflow -> result is a negative number. Possible solutions: downscale prior to the multiplication -> lost of precision use a larger datatype for intermediate results. It looks like B2D uses the first option (look at senders of accurateLengthOfwith and squaredLenghtOfwith Maybe there is something wrong with the other code that multiplies the values, or the 16.16 bit fixed point is just not large enough for some fills? Any ideas? Nicolai > >> This one works (no vm crash): >> |form canvas fill direction normal| >> direction := 1@0. >> normal := 0@0. >> form := Form extent:300@300 depth:32. >> canvas := form getCanvas. >> fill := GradientFillStyle new colorRamp:{0 -> Color white . 0.5 -> Color >> green . 1 -> Color blue};origin:150@150 >> ;direction:direction;normal:normal;radial:true;yourself. >> canvas fillRectangle: (50@50 extent:200@200) fillStyle: fill. >> Display getCanvas drawImage: form at: 300@300. >> >> >> direction := 1@0. >> normal := 0@0. >> -> OK >> >> direction := 0@0. >> normal := 0@1. >> -> OK >> >> direction := 1@0. >> normal := 0@1. >> -> VM-Crash (Pharo and Squeak) >> >> Pharo: >> VM Version: Cog VM 4.0.0 (release) from Feb 16 2015 >> Compiler: gcc 4.6.2 >> Interpreter Build: NBCoInterpreter >> NativeBoost-CogPlugin-EstebanLorenzano.21 uuid: >> 4d9b9bdf-2dfa-4c0b-99eb-5b110dadc697 Feb 16 2015 >> Cogit Build: NBCogit NativeBoost-CogPlugin-EstebanLorenzano.21 uuid: >> 4d9b9bdf-2dfa-4c0b-99eb-5b110dadc697 Feb 16 2015 >> Source Version: https://github.com/pharo-project/pharo-vm.git Commit: >> 55fbd0b0279998a4a33852f5afb3d213986cc3ae Date: 2015-02-16 17:54:00 +0100 >> By: Esteban Lorenzano <estebanlm(a)gmail.com> Jenkins build #14895 >> >> Current byte code: -1 >> Primitive index: 117 >> Smalltalk stack dump: >> 0x24c830 M BalloonEngine>copyLoopFaster 0x6b09b80: a(n) BalloonEngine >> 0x24c848 M BalloonEngine>copyBits 0x6b09b80: a(n) BalloonEngine >> 0x24c860 M BalloonEngine>postFlushIfNeeded 0x6b09b80: a(n) BalloonEngine >> 0x24c884 I >> BalloonEngine>drawRectangle:fill:borderWidth:borderColor:transform: >> 0x6b09b80: a(n) BalloonEngine >> 0x24c8b8 I BalloonCanvas>drawRectangle:color:borderWidth:borderColor: >> 0x6b099c0: a(n) BalloonCanvas >> 0x24c8e8 I BalloonCanvas>fillRectangle:basicFillStyle: 0x6b099c0: a(n) >> BalloonCanvas >> >> >> Squeak: >> VM Version: Cog VM 4.0.0 (release) from Aug 22 2013 >> Compiler: gcc 3.4.4 (cygming special, gdc 0.12, using dmd 0.125) >> Interpreter Build: CoInterpreter VMMaker.oscog-eem.331 uuid: >> 37d2e4b0-2f37-4e2d-8313-c63637785e59 Aug 22 2013 >> Cogit Build: StackToRegisterMappingCogit VMMaker.oscog-eem.333 uuid: >> 84da9cb8-7f30-4cb7-b4fb-239a11f63b54 Aug 22 2013 >> Source Version: VM: r2776 http://www.squeakvm.org/svn/squeak/branches/Cog >> Plugins: r2545 >> http://squeakvm.org/svn/squeak/trunk/platforms/Cross/plugins >> >> Current byte code: -1 >> Primitive index: 117 >> >> >> nicolai >> >> >> >> >

4 11

Do we have the new primitive?? [WAS] Re: [Pharo-project] IdentitySet but using #hash rather than #identityHash ?
by Mariano Martinez Peck 16 Dec '15

16 Dec '15

> All I can say is that I am impressed by the numbers it is really much >> faster. >> I still don't understand why I send this email with a subject say >> IdentitySet because what I really need is a fast/large IdentityDictionary >> :( Anyway, there's a place where we can use this LargeIdentitySet in Fuel >> I think). >> >> So Levente, you say this is not possible to adapt this for dictionary? >> can >> we contact Eliot to provide such a primitive? >> > > As promised, I uploaded my LargeIdentityDictionary implementation to > http://leves.web.elte.hu/**squeak/**LargeIdentityDictionary.st<http://leves.web.elte.hu/squeak/LargeIdentityDictionary.st>. > The numbers will be a bit worse compared to LargeIdentitySet, because of > the lack of the primitive, but it's still 2-3x faster than other solutions > (IdentityDictionary, PluggableIdentityDictionary, subclassing, etc). I'm > about to propose this primitive with other improvements on the vm-dev list. > > Hi Eliot/Levente. What is the status of this? Do we have already the new primitive? If true, how can we adapt LargeIdentitySet to use such new primitive? Thanks! > > Levente > > >> thanks >> >> On Fri, Dec 16, 2011 at 3:28 PM, Levente Uzonyi <leves(a)elte.hu> wrote: >> >> On Fri, 16 Dec 2011, Henrik Sperre Johansen wrote: >>> >>> On 16.12.2011 03:26, Levente Uzonyi wrote: >>> >>>> >>>> >>>>> How about my numbers? :) >>>>> >>>>> "Preallocate objects, so we won't count gc time." >>>>> n := 1000000. >>>>> objects := Array new: n streamContents: [ :stream | >>>>> n timesRepeat: [ stream nextPut: Object new ] ]. >>>>> >>>>> set := IdentitySet new: n. >>>>> Smalltalk garbageCollect. >>>>> [1 to: n do: [ :i | set add: (objects at: i) ] ] timeToRun. "4949" >>>>> >>>>> set := LargeIdentitySet new. >>>>> Smalltalk garbageCollect. >>>>> [1 to: n do: [ :i | set add: (objects at: i) ] ] timeToRun. "331" >>>>> >>>>> set := (PluggableSet new: n) >>>>> hashBlock: [ :object | object identityHash * 4096 + object class >>>>> identityHash * 64 ]; "Change this to #basicIdentityHash in Pharo" >>>>> equalBlock: [ :a :b | a == b ]; >>>>> yourself. >>>>> Smalltalk garbageCollect. >>>>> [1 to: n do: [ :i | set add: (objects at: i) ] ] timeToRun. "5511" >>>>> >>>>> >>>>> I also have a LargeIdentityDictionary, which is relatively fast, but >>>>> not >>>>> as fast as LargeIdentitySet, because (for some unknown reason) we don't >>>>> have a primitive that could support it. If we had a primitive like >>>>> primitive 132 which would return the index of the element if found or >>>>> 0 if >>>>> not, then we could have a really fast LargeIdentityDictionary. >>>>> >>>>> >>>>> Levente >>>>> >>>>> Hehe yes, if writing a version fully exploiting the limited range, >>>> that's >>>> probably the approach I would go for as well. >>>> (IAssuming it's the version at http://leves.web.elte.hu/** >>>> squeak/LargeIdentitySet.st<htt**p://leves.web.elte.hu/squeak/** >>>> LargeIdentitySet.st<http://leves.web.elte.hu/squeak/LargeIdentitySet.st> >>>> > >>>> ) >>>> >>>> Mariano commented in the version at http://www.squeaksource.com/** >>>> FuelExperiments <http://www.squeaksource.com/**FuelExperiments<http://www.squeaksource.com/FuelExperiments>> >>>> that it's >>>> >>>> slow for them, which I guess is due to not adopting #identityHash calls >>>> to >>>> #basicIdentityHash calls for Pharo: >>>> ((0 to: 4095) collect: [:each | each << 22 \\ 4096 ]) asSet size -> 1 >>>> So it basically uses 1 bucket instead of 4096... Whoops. :) >>>> >>>> Uploaded a new version to the MC repository which is adapted for Pharo, >>>> on the same machine my numbers were taken from, it does the same test >>>> as I >>>> used above in 871 ms. (181 with preallocation). >>>> >>>> >>> Cool. One more thing: in Squeak the method using primitive 132 directly >>> was renamed to #instVarsInclude:, so now #pointsTo: works as expected. If >>> this was also added to Pharo, then the #pointsTo: sends should be changed >>> to #instVarsInclude:, otherwise Array can be reported as included even if >>> it wasn't added. >>> I'll upload my LargeIdentityDictionary implementation to the same place >>> this evening, since it's still 2-3 factor faster than other solutionts >>> and >>> there seem to be demand for it. >>> >>> >>> Levente >>> >>> >>> Cheers, >>>> Henry >>>> >>>> >>>> >>>> >>> >> >> -- >> Mariano >> http://marianopeck.wordpress.**com <http://marianopeck.wordpress.com> >> >> > -- Mariano http://marianopeck.wordpress.com

4 12

keyUp event modifier bitmap of is shifted by 3 on OSX
by Kruck, Bastian 27 Nov '15

27 Nov '15

Hello Folks, when looking for how Cog passes keystrokes to the image, we found that the modifier bitmap of the keyUp events is left shifted by 3 bits on OS X. This seems to be a bug in Mac OS specific event handling. sqMacUIEvents.c usually unshifts the mouse buttons away before passing it to the image, but it doesn’t do that for keyup events. Something that I oversee here? This could be a fix: Index: platforms/Mac OS/vm/sqMacUIEvents.c =================================================================== --- platforms/Mac OS/vm/sqMacUIEvents.c (revision 3312) +++ platforms/Mac OS/vm/sqMacUIEvents.c (working copy) @@ -1717,7 +1717,7 @@ //fprintf(stdout,"\nrawkey up %i",ioMSecs()); key = findInKeyMap(keyCode); if (key != -1) { - enterKeystroke ( EventTypeKeyboard,keyCode, EventKeyUp, 0, ModifierStateCarbon(event,0)); + enterKeystroke ( EventTypeKeyboard,keyCode, EventKeyUp, 0, ModifierStateCarbon(event,0) >> 3); } removeFromKeyMap(keyCode); result = eventNotHandledErr; Unfortunately, I couldn’t verify the fix as I am running Yosemite which seems to not be supported yet for building from source. I appended the changeset which we used to find that issue. Steps to reproduce: 1) install our changeset into a Squeak4.5 image on OS X 2) run `TempSettings printEvents: true.` 3) open a Transcript 4) Press cmd+a 5) The fifth item of that Array should be 8 on the third time (but is 8<<3 instead) #(2 15512120 0 1 8 0 0 1) #(2 15512120 97 0 8 97 0 1) #(2 15512198 0 2 64 0 0 1) Tobias commented that this bug could be duplicated to some other places (which we didn’t verify yet). I am not sure, how many projects already rely on this behavior and how to go on with that. BR, Bastian Kruck

4 5

Maintainer of FFI-Package
by Nicolai Hess 12 Sep '15

12 Sep '15

Who is the maintainer of the FFI-Package for Squeak and/or Pharo ? I especially interested in the FFI-Unix examples and the state on working FFI on linux for current squeak release (AFAIK it does not work with "squeak all in one" 4.5) regards Nicolai

3 9

Re: [Pharo-dev] Reducing the activity of the image
by phil＠highoctane.be 02 Aug '15

02 Aug '15

Can't the box be setup 5o do some WoL thing and go back to sleep when idling for a while? This CPU usage is really annoying indeed. Phil Le 9 févr. 2015 21:11, "Norbert Hartl" <norbert(a)hartl.name> a écrit : > I have an installation where a pharo powered hardware is used in a closed > case. Over time that collects quite some heat. One reason for this is that > the pharo vm is taking approx. 6% CPU all the time. The only thing that > happens is network/sockets. I suspended the ui thread in the image but on > this platform it doesn't help. > Are there any tweaks to lower the polling and the activity of the image/vm > even more? > > thanks, > > Norbert > > >

7 16

SqueakSSL plugin v0.2.0 (was: Re: Fixes to the SqueakSSL Plugin)
by Das.Linux＠gmx.de 30 Jul '15

30 Jul '15

Dear Smalltalkers as a follow up to the SqueakSSL changes sent around yesterday… On 21.04.2015, at 16:52, Tobias Pape <Das.Linux(a)gmx.de> wrote: > Dear Smalltalkers > > Starting with Levente Uzonyi's patches to the Linux version > of the SqueakSSL-Plugin, we (Marcel Taeumel and me) have > ported this to the OS X and Windows version as well. > > Find three binaries[1] that can be used instead of > the ones found on versions found on SqueakSSL's google code > page. > […] > [1]: http://forum.world.st/file/n4820846/squeakssl.zip … I'd like to thank Levente Uzonyi and Ron Teitelbaum for their input and providing infrastructure. I put together all files and have uploaded them to the new (in the googlecode-export sense) SqueakSSL gitHub project: https://github.com/itsmeront/squeakssl/ And tagged a release as v0.2.0 with a Zip of all binaries (linux32/64,osx,windows) https://github.com/itsmeront/squeakssl/releases/tag/v0.2.0 (scroll to bottom for the binaries zip: squeakssl_v0.2.0.zip) I hope this comes in handy for anyone who wants to play around with that. Best -Tobias

5 11

Long path name support added for win32
by Marcel Taeumel 15 May '15

15 May '15

sqWin32FilePrims.c <http://forum.world.st/file/n4796045/sqWin32FilePrims.c> Hi! :) I added support for long path names according to the hint given here: http://msdn.microsoft.com/en-us/library/windows/desktop/aa365247%28v=vs.85%… Just prepending "\\?\" in that case. Further limitations may have to be investigated. ;) Eliot, could you add this to the VM trunk? Best, Marcel -- View this message in context: http://forum.world.st/Long-path-name-support-added-for-win32-tp4796045.html Sent from the Squeak VM mailing list archive at Nabble.com.

5 9

Need a marker primitive
by timfelgentreff 01 May '15

01 May '15

Hi, I'd like to add a primitive pragma to InterpreterSimulator>>primitiveFail so the RSqueakVM can notice when the simulation is about to fail. What would be a good primitive number for that? Would 114 (exitToDebugger) work? If so, I would add it there. -- View this message in context: http://forum.world.st/Need-a-marker-primitive-tp4821675.html Sent from the Squeak VM mailing list archive at Nabble.com.

3 13

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Vm-dev April 2015