Much obliged! 

> -----Original Message-----
> From: squeak-dev-bounces at lists.squeakfoundation.org 
> [mailto:squeak-dev-bounces at lists.squeakfoundation.org] On 
> Behalf Of Andreas Raab
> Sent: Sunday, July 18, 2004 7:54 PM
> To: The general-purpose Squeak developers list
> Subject: Re: UI issue: Windows: 'Fully qualified path expected'
> 
> Because it needs to be approved before it will be included. See
> http://minnow.cc.gatech.edu/squeak/3152 for the full process.
> 
>   - A.
> 
> ----- Original Message -----
> From: "Brad Fuller" <brad at sonaural.com>
> To: "'The general-purpose Squeak developers list'"
> <squeak-dev at lists.squeakfoundation.org>
> Sent: Sunday, July 18, 2004 2:20 PM
> Subject: RE: UI issue: Windows: 'Fully qualified path expected'
> 
> 
> > Thanks Andreas.
> > I have a question then: if it was fixed back in april, why 
> wouldn't this
> fix
> > be in the build that I am running 3.7b 5969? Would it only 
> be in the final
> > 3.7?
> >
> > > -----Original Message-----
> > > From: squeak-dev-bounces at lists.squeakfoundation.org
> > > [mailto:squeak-dev-bounces at lists.squeakfoundation.org] On
> > > Behalf Of Andreas Raab
> > > Sent: Sunday, July 18, 2004 11:10 AM
> > > To: The general-purpose Squeak developers list
> > > Subject: Re: UI issue: Windows: 'Fully qualified path expected'
> > >
> > > The problem was found and a fix posted in april, see the 
> thread at:
> > >
> > > http://lists.squeakfoundation.org/pipermail/squeak-dev/2004-Ap
> > ril/077832.html
> > >
> > > Cheers,
> > >   - Andreas
> > >
> > > ----- Original Message -----
> > > From: "Brad Fuller" <brad at sonaural.com>
> > > To: "'The general-purpose Squeak developers list'"
> > > <squeak-dev at lists.squeakfoundation.org>
> > > Sent: Sunday, July 18, 2004 9:54 AM
> > > Subject: UI issue: Windows: 'Fully qualified path expected'
> > >
> > >
> > > > Why does StandardFileMenu not show all of the drives on
> > > Windows when, for
> > > > instance, one selects "load project from file..." from the
> > > World menu?
> > > >
> > > > And, when one selects, in this menu, the path above the
> > > drive (shown as
> > > > '[]') there is an error (because it sends nil to
> > > > DosFileDirectory>>setPathName:)
> > > > '[]' to me implies "show all drives" (to me anyway)
> > > >
> > > > I would think that all drives should be shown but, at the
> > > very least, the
> > > > selection of '[]' should do something other than report 
> an error.
> > > >
> > > > brad
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
> 
> 
> 
>