We've got to get the default platform attributes on Squeak updated for 4.6
and 5.0 before Seaside will load properly.  I've started a thread on the
Metacello list:
http://forum.world.st/MetacelloSqueakPlatform-gt-gt-defaultPlatformAttributes-needs-an-update-td4844596.html





Tobias Pape wrote
> Hi Chris
> 
> Sorry that this is a rather late email.
> 
> On 07.08.2015, at 17:14, Chris Cunnington <

> brasspen@

> > wrote:
> 
>> Hi Tobias,
>> 
> 
>> It's none of my business what is or is not on squeak.org. But you're
>> statement is kind of confusing to me, so for the sake of my own clarity
>> of mind, I've deduced the following. Here are the two side by side:
>> 
>> "squeak.org/projects page"
>> 
>> Installer squeaksource project: 'MetacelloRepository'; install:
>> 'ConfigurationOfSeaside3'.
>> (Smalltalk at: #ConfigurationOfSeaside3) load.
>> 
> 
> This is correct and maintained.
> 
>> "Menu>>Extending The System"
>> 
>> (Installer ss project: 'MetacelloRepository') install:
>> 'ConfigurationOfSeaside30'.
>> (Smalltalk at: #ConfigurationOfSeaside30) load.
>> (Smalltalk at: #WAPharoServerAdaptorBrowser) open.
> 
> This is outdated.
> 
>> 
>> You will notice that in MetacelloRepository there is both
>> ConfigurationOfSeaside30 and ConfigurationOfSeaside3. The former has its
>> last entry on 10 Sept. 2013. The later has its first entry at 25 Sept.
>> 2013. It's first entry message from Esteban Lorenzano is instructive: 
>> 
>> "- 3.1 was not loading any adaptor. Added Seaside-Adaptor (not tested
>> outside Pharo)"
>> 
>> It looks to me like ConfigurationOfSeaside3 is better suited for Pharo
>> and ConfigurationOfSeaside30 is better suited to Squeak. This is
>> supported by the inclusion of ConfigurationOfSeaside30 in
>> Menu>>ExtendingTheSystem which is already proven to work. 
> 
> No no no. ConfigurationOfSeaside30 is unmaintained as of now.
> By default, ConfigurationOfSeaside3 has _no_ adaptor, as the installation
> cannot know,
> whether you want, FastCGI, Comanche, Comet, or WebServer. That's why it
> has to be explicit.
> 
> Also, by default it does not load the dev tools, which is ok, as the
> Config is used for
> automated testing and deployment.
> 
> There is, however, a 'OneClick' group that loads a lot of interesting
> stuff:
> 
>  #('Development' 'Welcome' 'RSS-Examples' 'Seaside-Email'
> 'Seaside-Examples' 'Seaside-Tools-Web' 'WebClient')
> 
> (where WebClient would load a usable adaptor!)
> That's how I built the 4.4-Seaside-3.0.8 AllInOne
> (http://ftp.squeak.org/4.4/seaside/)
> 
> 
> That's why the correct version for Squeak 4.5/5.0 is
> 
> ====
> (Installer repository:
> 'http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main')
>     install: 'ConfigurationOfSeaside3'.
> ((Smalltalk at: #ConfigurationOfSeaside3) project version: #stable) load.
> "Or 
>   ((Smalltalk at: #ConfigurationOfSeaside3) project version: #stable)
> load: 'OneClick'
> for the jumpstart experience
> "
> ====
> 
> and for the website it's
> 
> ====
> Metacello new 
>     configuration: 'Seaside3';
>     repository:
> 'http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main';
>     version: #stable;
>     load: 'OneClick'.
> "Make sure you have Metacello installed."
> ====
> 
> Best regards
> 	-Tobias
> 
> PS: If I find time after my vacation, I'll probably build a
> 5.0-Seaside-3.2 AIO…





--
View this message in context: http://forum.world.st/Seaside-64-bit-tp4841507p4844609.html
Sent from the Squeak - Dev mailing list archive at Nabble.com.