[squeak-dev] smalltalkCI Trunk broken: vmParameterAt:put: failed

Nicolas Cellier nicolas.cellier.aka.nice at gmail.com
Mon Mar 23 21:08:45 UTC 2020


Le lun. 23 mars 2020 à 21:12, Jakob Reschke <forums.jakob at resfarm.de> a
écrit :

> The VMs are pulled by smalltalkCI, I have no control over that. Or have I?
>
> Maybe check the smalltalkCI scripts and send a pull request (or simply
open an issue: Squeak32/64-trunk and 5.3 should use VM from 2020).

Also note that this is a Linux Squeak VM, running under the Linux
> subsystem, not a Windows Squeak VM.
>
> Ah yes, sorry,
I also compile and test spur64 on wsl from time to time, so should better
reconnect my mind ;)
Let me see, introduction of wheel events support is from Nov 2018
https://github.com/OpenSmalltalk/opensmalltalk-vm/commit/897ef1725e32c2eb3d24e3402b2e95b114b8b28b

So VM 5.0-201810190412 is still too old on linux too, not only on windows.

Am Mo., 23. März 2020 um 21:07 Uhr schrieb Nicolas Cellier
> <nicolas.cellier.aka.nice at gmail.com>:
> >
> > Hi Jakob,
> > I think that I put in 6.0 trunk a postscript instruction that activates
> the delivery of mouse wheel events.
> > This requires an updated VM on windows (I honoured this request by end
> of 2019).
> > So the question is why is the VM so old?
> >
> > Le lun. 23 mars 2020 à 20:59, Jakob Reschke <forums.jakob at resfarm.de> a
> écrit :
> >>
> >> Am Di., 10. März 2020 um 20:47 Uhr schrieb Jakob Reschke
> >> <forums.jakob at resfarm.de>:
> >> >
> >> > Am Di., 10. März 2020 um 20:42 Uhr schrieb Eliot Miranda
> >> > <eliot.miranda at gmail.com>:
> >> > >
> >> > > Any stack traces?  Which parameter, which value was being assigned,
> etc?
> >> > >
> >> > > "Something went wrong" is rather vague...
> >> >
> >> > I know, unfortunately Travis does not provide any more specific
> output. :-(
> >> > Maybe I can try to run smalltalkCI on my machine later and see whether
> >> > that gives anything.
> >>
> >> I finally got around to try a local build. But still no debug log or
> >> crash dump to be found.
> >> The Trunk builds are still failing, while the 5.2 builds are fine.
> >>
> >> @Fabio: should I look anywhere else than in the build directory? This
> >> is the listing:
> >>
> >> jakob at JAKOBS-PC:~/smalltalkCI/_builds/2020_03_23_20_39_33$ ls -la
> >> insgesamt 135648
> >> drwxrwxrwx 1 jakob jakob     4096 Mär 23 20:44 .
> >> drwxrwxrwx 1 jakob jakob     4096 Mär 23 20:39 ..
> >> -rw-rw-rw- 1 jakob jakob      496 Mär 23 20:39 coveralls_build_data.json
> >> -rw-rw-rw- 1 jakob jakob      390 Mär 23 20:44 load.st
> >> drwxrwxrwx 1 jakob jakob     4096 Mär 23 20:43 package-cache
> >> -rw-rw-rw- 1 jakob jakob     1961 Mär 23 20:39 prepare.st
> >> -rw-r--r-- 1 jakob jakob      120 Dez  6  2018
> >> ._Squeak5.3alpha-18294-64bit.changes
> >> -rw-r--r-- 1 jakob jakob      268 Dez  6  2018
> >> ._Squeak5.3alpha-18294-64bit.image
> >> -rw-rw-rw- 1 jakob jakob 26874889 Mär 23 20:39 Squeak64-trunk.tar.gz
> >> -rw-r--r-- 1 jakob jakob      212 Okt  8  2018 ._SqueakV50.sources
> >> -rw-r--r-- 1 jakob jakob 35184983 Okt  8  2018 SqueakV50.sources
> >> -rw-r--r-- 1 jakob jakob 20592231 Mär 23 20:44 TravisCI.changes
> >> -rw-r--r-- 1 jakob jakob 54393712 Mär 23 20:44 TravisCI.image
> >> -rwxrwxrwx 1 jakob jakob       79 Mär 23 20:39 vm
> >>
> >> If I should send any files, please tell me.
> >>
> >> Note that this is on Windows Subsystem for Linux, but it didn't make
> >> any difference in the past.
> >> The smalltalkCI output is the same as on Travis: (see below).
> >>
> >> During the headful run, I could watch it recompiling all methods
> >> (presumably after switching Sista on?), and quickly after that Squeak
> >> shut down. But I cannot tell whether it did so cleanly or not.
> >>
> >> Kind regards,
> >> Jakob
> >>
> >>
> >> jakob at JAKOBS-PC:~/smalltalkCI$ bin/smalltalkci --headful
> >> /mnt/c/Squeak/MA/Squot-Squit/.smalltalk.ston
> >>  1) Squeak64-trunk      15) Pharo64-8.0         29) GemStone64-3.4.3
> >>  2) Squeak64-5.3        16) Pharo64-7.0         30) GemStone64-3.3.9
> >>  3) Squeak64-5.2        17) Pharo64-6.1         31) GemStone64-3.3.2
> >>  4) Squeak64-5.1        18) Pharo64-6.0         32) GemStone64-3.3.0
> >>  5) Squeak32-trunk      19) Pharo32-stable      33) GemStone64-3.2.12
> >>  6) Squeak32-5.3        20) Pharo32-alpha       34) GemStone64-3.1.0.6
> >>  7) Squeak32-5.2        21) Pharo32-9.0         35) Moose64-trunk
> >>  8) Squeak32-5.1        22) Pharo32-8.0         36) Moose64-8.0
> >>  9) Squeak32-5.0        23) Pharo32-7.0         37) Moose64-7.0
> >> 10) Squeak32-4.6        24) Pharo32-6.0         38) Moose32-trunk
> >> 11) Squeak32-4.5        25) Pharo32-5.0         39) Moose32-8.0
> >> 12) Pharo64-stable      26) Pharo32-4.0         40) Moose32-7.0
> >> 13) Pharo64-alpha       27) Pharo32-3.0         41) Moose32-6.1
> >> 14) Pharo64-9.0         28) GemStone64-3.5.0    42) Moose32-6.0
> >> Choose Smalltalk image: 1
> >> Preparing folders...
> >> Starting Squeak build...
> >> Downloading Squeak64-trunk image...
> >>  > Time to run: 6.288s
> >> Cog VM Information
> >> 5.0-201810190412  Sat Oct 20 08:17:23 UTC 2018 gcc 4.8 [Production
> >> Spur 64-bit ITHB VM]
> >> CoInterpreter VMMaker.oscog-eem.2461 uuid:
> >> b3cd33f5-6309-43a1-b669-7a1805111f34 Oct 20 2018
> >> StackToRegisterMappingCogit VMMaker.oscog-eem.2464 uuid:
> >> 0b1fa0a3-a781-4fd5-b1cf-1809796ccbbf Oct 20 2018
> >> VM: 201810190412 https://github.com/OpenSmalltalk/opensmalltalk-vm.git
> >> Date: Thu Oct 18 21:12:21 2018 CommitHash: 15341b57
> >> Plugins: 201810190412
> https://github.com/OpenSmalltalk/opensmalltalk-vm.git
> >> Linux travis-job-7e855ac8-57b9-4f6f-bf30-fd6e0ad67398
> >> 4.4.0-101-generic #124~14.04.1-Ubuntu SMP Fri Nov 10 19:05:36 UTC 2017
> >> x86_64 x86_64 x86_64 GNU/Linux
> >> plugin path:
> /home/jakob/smalltalkCI/_cache/vms/Squeak64-trunk/sqcogspur64linux/lib/squeak/5.0-201810190412
> >> [default:
> /home/jakob/smalltalkCI/_cache/vms/Squeak64-trunk/sqcogspur64linux/lib/squeak/5.0-201810190412/]
> >>  > Time to run: 0.061s
> >> Preparing Squeak64-trunk image for CI...
> >> ........................................................Error:
> >> vmParameterAt:put: failed > Time to run: 275.810s
> >> Build was unable to report intermediate build status.
> >> cat:
> /home/jakob/smalltalkCI/_builds/2020_03_23_20_39_33/build_status.txt:
> >> Datei oder Verzeichnis nicht gefunden
> >>
> >> Error with status code 1:
> >> 237 check_and_consume_build_status_file
> /home/jakob/smalltalkCI/helpers.sh
> >>
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.squeakfoundation.org/pipermail/squeak-dev/attachments/20200323/3971cc2e/attachment.html>


More information about the Squeak-dev mailing list