Enjoy and make sure you use a special crypto.image as it auto-reloads, 
when c;lick #confirm: 'Load ...? returns true

--- Install these --

    Installer ss project: 'Cryptography'; install: 'ProCrypto-1-1-3'; 
    install: 'ProCryptoTests-1-1-3`'.
    Installer ss project: 'Promises'; install: 'PromisesLoader'.
    Installer ss project: 'Cryptography'; install: 'ParrotTalkLoader'.

--- on restart of image, update from alpha trunk, reload ProCrypto and 
ProCryptoTests and save image ---

With all Cryptography, Registers, TraceMonitor, PromisesLocal and 
ParrotTalk tests selected:

  * *319 passes*
  * *4 expected failures. *

/*#GREEN323*/

---

Have a good one; keep it, light.
Kindly,
rabbit
. .. … ‘…^,^

Sent from Callisto House :: decentralized mobile homeless solutions

On 10/3/22 07:38, rabbit wrote:
>
> Oops! I failed to test PromisesLocal. When that package is loaded, the 
> ProtocolState package is not and tests fail. I created a 
> PromisesLoader configuration so run this to load it up...
>
>       * */Installer ss project: 'Promises'; install: 'PromisesLoader'./*
>
> Have a good one; keep it, light.
> Kindly,
> rabbit
> . .. … ‘…^,^
>
> Sent from Callisto House :: decentralized mobile homeless solutions
>
>
> On 10/2/22 14:05, rabbit wrote:
>>
>> Well I do not know what my issue was, now loading the 
>> CryptographyBootsatrap calls initialize...no need to explicitly 
>> call#//satrap. // This adds CryptographyBootsatrap to the startUp: 
>> list and #startUp: true calls #satrap on every restart. So with this 
>> image, every restart does the following...1) loads latest 
>> FixCharacterLimit, 2) updates from the alpha trunk, 3) loads latest 
>> Crypto, 4) runs all Crypto tests and 5) saves the image.
>>
>>     Cryptography class>>#satrap
>>
>>      1. loads the 'FixCharacterLimit, which also defines new
>>         convenience methods
>>
>>           * MCMcmUpdater class>>#updateFromAlphaTrunk
>>           * TestSuite class>>#testsPassInCategory: categoryName
>>
>>      2. updateFromAlphaTrunk
>>
>>           * sets #defaultUpdateURL: to the alpha trunk
>>             ('https://source.squeak.org/trunk')
>>           * calls #updateFromServer.
>>
>>      3. loads 'ProCrypto-1-1-1' and 'ProCryptoTests-1-1-1'
>>      4. calls the new method CryptographyTestCase
>>         class>>#runAllCryptoTests
>>      5. saves the image.
>>
>> So this should suffice to make all this happen in a new crypto image...
>>
>>     /Installer ss project: 'Cryptography'; install:
>>     'CryptographyBootsatrap'./
>>
>> Make sure you use a custom crypto image, saved off to the side as 
>> this will always run #satrap and the above steps.
>>
>> /Cheers!
>> /
>>
>> Have a good one; keep it, light.
>> Kindly,
>> rabbit
>> . .. … ‘…^,^
>>
>> Sent from Callisto House :: decentralized mobile homeless solutions
>>
>>
>> On 9/30/22 20:03, rabbit wrote:
>>>
>>> Ooops!
>>>
>>> Try this. is better.
>>>
>>>     /Installer ss project: 'Cryptography'; install:
>>>     'CryptographyBootsatrap'.
>>>     (Smalltalk at: #CryptographyBootsatrap ifAbsent: [^ nil])
>>>     ///satrap/./
>>>
>>> Have a good one; keep it, light.
>>> Kindly,
>>> rabbit
>>> . .. … ‘…^,^
>>>
>>> Sent from Callisto House :: decentralized mobile homeless solutions
>>>
>>>
>>> On 9/30/22 19:55, rabbit wrote:
>>>>
>>>> Hey Ron; Hey everyone! I am hoping y'all are quite well! I am.
>>>>
>>>> I’m a disabled veteran, President of my non-profit, Callisto House 
>>>> :: decentralized mobile homeless solutions. I aim to use my Async 
>>>> Promise framework to build a donation bartering system for their 
>>>> use, in each House. *SecureObjectCapabilities.*
>>>>
>>>>     *Issue: *Why does squeaksource.com hang-up so often? Err...
>>>>
>>>> I have refactored the packages in Cryptography, Oceanside & 
>>>> Promises. I put all Promise packages in Promise, including 
>>>> Raven&SqueakELib&Brook&... previous incarnations. I removed all 
>>>> Promise packages from Cryptography and Oceanside. I created the 
>>>> project Kafka.
>>>>
>>>> /--- Loading instructions :: Update from trunk, Crypto, 
>>>> PromisesLocal and ParrotTalk ---\
>>>>
>>>> One: save a new 6.1alpjha image to crypto.image...
>>>>
>>>> Two: This code switches to the trunk update stream and update to 
>>>> alpha; then load and test Crypto, then save. See
>>>> /CryptographyBootsatrap class>>#satrap.
>>>> /
>>>>
>>>> Everytime this image #startUp: true, the latest update to alpha; 
>>>> then load and test latest Crypto, then save.
>>>>
>>>>     /Installer ss project: 'Cryptography'; install:
>>>>     'CryptographyBootsatrap'.
>>>>     (Smalltalk at: 'CryptographyBootsatrap' ifAbsent: [^ nil])
>>>>     ///satrap/.
>>>>     /
>>>>
>>>> Three: I install PomisesLocal & ParrotTalk packages
>>>>
>>>>     /Installer ss project: 'Promises'; install: 'PromisesLocal'.
>>>>     Installer ss project: 'Cryptography'; install: 'ParrotTalkLoader'./
>>>>
>>>> Lastly, I run all tests in the TestRunner. #GREEN!
>>>>
>>>> \--- Confirm by running apropos unit tests: *#GREEN!* .  ..   
>>>> ...    '...^,^ ---/
>>>>
>>>> My priority task list:
>>>>
>>>>  1. Checkpoint a stable ParrotTalk, ASN1 & LocalPromises
>>>>  2. *{XXX}* ASN1 extensions to provide class tagging differentiation.
>>>>       * This to support RemotePromises encoding in ASN1.
>>>>  3. Checkpoint a stable ProCrypto with class tagging ASN1
>>>>  4. Switch LocalPromises EventualSends to each be its own
>>>>     EventualProcess, on a VatScheduler.
>>>>       * Add customized Semaphores to unschedule back into the Vat
>>>>         suspended pool
>>>>       * rescheduled when the Semaphore is signaled.
>>>>  5. Re-establish RemotePromises
>>>>  6. Checkpoint a stable RemotePromises
>>>>  7. Naming Services, using RemotePromises
>>>>  8. Default VAT Services (Chat, Log, Stats, Social Feeds, ...)
>>>>  9. Double encrypt ParrotTalk | Bridge ParrotTalk sessions
>>>> 10. Checkpoint a stable BridgingParrotTalk
>>>> 11. Kafka | Replicating, fault-tolerant Comms (issue with event
>>>>     deletion)
>>>> 12. Barter exchange network
>>>> 13. SPADSServer
>>>> 14. FFI-threaded
>>>> 15. libsodium
>>>>
>>>> ---
>>>>
>>>> *{XXX}* *ASN1 extensions to provide class tagging differentiation.
>>>> *
>>>> *This to support RemotePromises encoding in ASN1.*
>>>> *
>>>> *
>>>> *My current questions are whether the various PKIX et al use a 
>>>> non-UNIVERSAL class tag, and/or Constructed? As well, what are the 
>>>> correct numerical tags for these structures? Advice, por favor?*
>>>>
>>>>   * DSAPublicKey
>>>>   * RSAPublicKey
>>>>   * X509Certificate
>>>>   * ...
>>>>
>>>> The numerical tags are buried in this document, but I am totally 
>>>> unaware of class tagging:
>>>>
>>>>     *New ASN.1 Modules for the Public Key Infrastructure Using
>>>>     X.509 (PKIX) <https://datatracker.ietf.org/doc/html/rfc5912>*
>>>>
>>>>
>>>> Many thanks for any guidance you can provide. I am grateful for 
>>>> your pointing out the straight path to me!
>>>>
>>>>     Have a Good One; Keep it, Light.
>>>>     Kindly,
>>>>     rabbit
>>>>     . .. … ‘…^,^
>>>>
>>>>
>>>>     Sent from Callisto House :: decentralized mobile homeless solutions
>>>>
>>>>
>>>> _______________________________________________
>>>> Cryptography mailing list
>>>> Cryptography at lists.squeakfoundation.org
>>>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/cryptography
>>>
>>> _______________________________________________
>>> Cryptography mailing list
>>> Cryptography at lists.squeakfoundation.org
>>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/cryptography
>>
>> _______________________________________________
>> Cryptography mailing list
>> Cryptography at lists.squeakfoundation.org
>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/cryptography
>
> _______________________________________________
> Cryptography mailing list
> Cryptography at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/cryptography
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.squeakfoundation.org/pipermail/squeak-dev/attachments/20221004/d3e9b519/attachment.html>