[Vm-dev] [commit] r2510 - Add separate build directories to bochs
library to enable building
commits at squeakvm.org
commits at squeakvm.org
Sat Nov 12 21:10:07 UTC 2011
Author: eliot
Date: 2011-11-12 13:10:06 -0800 (Sat, 12 Nov 2011)
New Revision: 2510
Added:
branches/Cog/processors/IA32/bochs/README.COG
branches/Cog/processors/IA32/bochs/exploration/Makefile
branches/Cog/processors/IA32/linuxbochs/
branches/Cog/processors/IA32/linuxbochs/conf.COG
branches/Cog/processors/IA32/macbochs/
branches/Cog/processors/IA32/macbochs/conf.COG
branches/Cog/processors/IA32/winbochs/
branches/Cog/processors/IA32/winbochs/conf.COG
Removed:
branches/Cog/processors/IA32/bochs/conf.COG
branches/Cog/processors/IA32/bochs/config.h
Modified:
branches/Cog/cygwinbuild/plugins.ext
branches/Cog/macbuild/BochsIA32Plugin/BochsIA32Plugin.xcodeproj/project.pbxproj
branches/Cog/processors/IA32/bochs/exploration/printcpu.c
branches/Cog/processors/IA32/bochs/exploration/printcpucr.c
branches/Cog/processors/IA32/bochs/exploration/printcpuxmm.c
Log:
Add separate build directories to bochs library to enable building
BochsIA32Plugin on multiple platforms. Add external BochsIA32Plugin on win32.
Modified: branches/Cog/cygwinbuild/plugins.ext
===================================================================
--- branches/Cog/cygwinbuild/plugins.ext 2011-11-10 02:11:13 UTC (rev 2509)
+++ branches/Cog/cygwinbuild/plugins.ext 2011-11-12 21:10:06 UTC (rev 2510)
@@ -1,5 +1,6 @@
# List of external plugins.
EXTERNAL_PLUGINS = \
+BochsIA32Plugin \
SqueakFFIPrims \
Win32OSProcessPlugin
Modified: branches/Cog/macbuild/BochsIA32Plugin/BochsIA32Plugin.xcodeproj/project.pbxproj
===================================================================
--- branches/Cog/macbuild/BochsIA32Plugin/BochsIA32Plugin.xcodeproj/project.pbxproj 2011-11-10 02:11:13 UTC (rev 2509)
+++ branches/Cog/macbuild/BochsIA32Plugin/BochsIA32Plugin.xcodeproj/project.pbxproj 2011-11-12 21:10:06 UTC (rev 2510)
@@ -19,10 +19,10 @@
08EA7FFBFE8413EDC02AAC07 /* Carbon.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = Carbon.framework; path = /System/Library/Frameworks/Carbon.framework; sourceTree = "<absolute>"; };
73020E8C0EE714E60021D217 /* BochsIA32Plugin.c */ = {isa = PBXFileReference; fileEncoding = 30; lastKnownFileType = sourcecode.c.c; name = BochsIA32Plugin.c; path = ../../src/plugins/BochsIA32Plugin/BochsIA32Plugin.c; sourceTree = SOURCE_ROOT; };
73020E8E0EE7158C0021D217 /* BochsIA32Plugin.h */ = {isa = PBXFileReference; fileEncoding = 30; lastKnownFileType = sourcecode.c.h; name = BochsIA32Plugin.h; path = ../../platforms/Cross/plugins/BochsIA32Plugin/BochsIA32Plugin.h; sourceTree = SOURCE_ROOT; };
- 737482B20EE7339F004E10F8 /* libcpu.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libcpu.a; path = ../../processors/IA32/bochs/cpu/libcpu.a; sourceTree = SOURCE_ROOT; };
- 737482B40EE733BD004E10F8 /* libfpu.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libfpu.a; path = ../../processors/IA32/bochs/fpu/libfpu.a; sourceTree = SOURCE_ROOT; };
+ 737482B20EE7339F004E10F8 /* libcpu.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libcpu.a; path = ../../processors/IA32/macbochs/cpu/libcpu.a; sourceTree = SOURCE_ROOT; };
+ 737482B40EE733BD004E10F8 /* libfpu.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libfpu.a; path = ../../processors/IA32/macbochs/fpu/libfpu.a; sourceTree = SOURCE_ROOT; };
737482B60EE7343B004E10F8 /* sqBochsIA32Plugin.cpp */ = {isa = PBXFileReference; explicitFileType = sourcecode.cpp.cpp; fileEncoding = 30; name = sqBochsIA32Plugin.cpp; path = ../../platforms/Cross/plugins/BochsIA32Plugin/sqBochsIA32Plugin.cpp; sourceTree = SOURCE_ROOT; };
- 737483070EE7406A004E10F8 /* libdisasm.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libdisasm.a; path = ../../processors/IA32/bochs/disasm/libdisasm.a; sourceTree = SOURCE_ROOT; };
+ 737483070EE7406A004E10F8 /* libdisasm.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libdisasm.a; path = ../../processors/IA32/macbochs/disasm/libdisasm.a; sourceTree = SOURCE_ROOT; };
8D01CCD10486CAD60068D4B7 /* Info.plist */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = text.plist; path = Info.plist; sourceTree = "<group>"; };
8D01CCD20486CAD60068D4B7 /* BochsIA32Plugin.bundle */ = {isa = PBXFileReference; explicitFileType = wrapper.cfbundle; includeInIndex = 0; path = BochsIA32Plugin.bundle; sourceTree = BUILT_PRODUCTS_DIR; };
DA3A20F50AA63CBF0050B983 /* interp.h */ = {isa = PBXFileReference; fileEncoding = 30; lastKnownFileType = sourcecode.c.h; name = interp.h; path = ../../src/vm/interp.h; sourceTree = SOURCE_ROOT; };
@@ -178,14 +178,10 @@
"$(LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_1)",
"$(LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_2)",
"$(LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_3)",
- "$(LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_4)",
- "$(LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_5)",
);
- LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_1 = "\"$(SRCROOT)/../../processors/IA32/bochs/cpu\"";
- LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_2 = "\"$(SRCROOT)/../../processors/IA32/bochs/fpu\"";
- LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_3 = "\"$(SRCROOT)/../../processors/IA32/bochs/disasm\"";
- LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_4 = "\"$(SRCROOT)/../../processors/IA32/bochs/gui\"";
- LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_5 = "\"$(SRCROOT)/../../processors/IA32/bochs/gui\"";
+ LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_1 = "\"$(SRCROOT)/../../processors/IA32/macbochs/cpu\"";
+ LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_2 = "\"$(SRCROOT)/../../processors/IA32/macbochs/fpu\"";
+ LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_3 = "\"$(SRCROOT)/../../processors/IA32/macbochs/disasm\"";
PRODUCT_NAME = BochsIA32Plugin;
WRAPPER_EXTENSION = bundle;
ZERO_LINK = YES;
@@ -205,14 +201,10 @@
"$(LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_1)",
"$(LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_2)",
"$(LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_3)",
- "$(LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_4)",
- "$(LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_5)",
);
- LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_1 = "\"$(SRCROOT)/../../processors/IA32/bochs/cpu\"";
- LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_2 = "\"$(SRCROOT)/../../processors/IA32/bochs/fpu\"";
- LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_3 = "\"$(SRCROOT)/../../processors/IA32/bochs/disasm\"";
- LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_4 = "\"$(SRCROOT)/../../processors/IA32/bochs/gui\"";
- LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_5 = "\"$(SRCROOT)/../../processors/IA32/bochs/gui\"";
+ LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_1 = "\"$(SRCROOT)/../../processors/IA32/macbochs/cpu\"";
+ LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_2 = "\"$(SRCROOT)/../../processors/IA32/macbochs/fpu\"";
+ LIBRARY_SEARCH_PATHS_QUOTED_FOR_TARGET_3 = "\"$(SRCROOT)/../../processors/IA32/macbochs/disasm\"";
PRODUCT_NAME = BochsIA32Plugin;
WRAPPER_EXTENSION = bundle;
};
Added: branches/Cog/processors/IA32/bochs/README.COG
===================================================================
--- branches/Cog/processors/IA32/bochs/README.COG (rev 0)
+++ branches/Cog/processors/IA32/bochs/README.COG 2011-11-12 21:10:06 UTC (rev 2510)
@@ -0,0 +1,3 @@
+Guide to build Bochs support librarires libcpu.a libfpu.a & libdisasm.a for Cog.
+Go to the sibling directory for your platform (../macbochs, ../winbochs etc)
+and read and then run conf.COG there-in. Then run ../bochs/makeem there-in.
Deleted: branches/Cog/processors/IA32/bochs/conf.COG
===================================================================
--- branches/Cog/processors/IA32/bochs/conf.COG 2011-11-10 02:11:13 UTC (rev 2509)
+++ branches/Cog/processors/IA32/bochs/conf.COG 2011-11-12 21:10:06 UTC (rev 2510)
@@ -1,48 +0,0 @@
-#!/bin/sh
-
-# this sets up the compile for Cog. Disable as much inessential stuff
-# as possible leaving only the cpu/fpu & memory interface
-
-# build using
-# $ ./conf.COG
-# $ ./makeem
-
-set echo
-# CFLAGS="-pipe -O3 -fomit-frame-pointer -finline-functions -falign-loops=16 -falign-jumps=16 -falign-functions=16 -falign-labels=16 -falign-loops-max-skip=15 -falign-jumps-max-skip=15 -fprefetch-loop-arrays $CFLAGS"
-CFLAGS="-m32 $CFLAGS"
-CFLAGS="-Dlongjmp=_longjmp -Dsetjmp=_setjmp $CFLAGS"
-CFLAGS="-pipe -O3 -fomit-frame-pointer -finline-functions $CFLAGS"
-CFLAGS="-g $CFLAGS"
-CPPFLAGS=""
-CXXFLAGS="$CFLAGS"
-
-export CFLAGS
-export CPATH
-export CPPFLAGS
-export CXXFLAGS
-export LDFLAGS
-
-./configure --enable-Cog \
- --enable-cpu-level=6 \
- --enable-sse=2 \
- --enable-assert-checks \
- --with-nogui \
- --disable-x86-64 \
- --disable-pae \
- --disable-large-pages \
- --disable-global-pages \
- --disable-mtrr \
- --disable-sb16 \
- --disable-ne2000 \
- --disable-pci \
- --disable-acpi \
- --disable-apic \
- --disable-clgd54xx \
- --disable-usb \
- --disable-plugins \
- ${CONFIGURE_ARGS}
-
-# apic == Advanced programmable Interrupt Controller
-# acpi == Advanced Configuration and Power Interface
-# pci == Peripheral Component Interconnect local bus
-# clgd54xx == Cirrus Logic GD54xx video card
Deleted: branches/Cog/processors/IA32/bochs/config.h
===================================================================
--- branches/Cog/processors/IA32/bochs/config.h 2011-11-10 02:11:13 UTC (rev 2509)
+++ branches/Cog/processors/IA32/bochs/config.h 2011-11-12 21:10:06 UTC (rev 2510)
@@ -1,979 +0,0 @@
-/* config.h. Generated from config.h.in by configure. */
-// Copyright (C) 2001 MandrakeSoft S.A.
-//
-// MandrakeSoft S.A.
-// 43, rue d'Aboukir
-// 75002 Paris - France
-// http://www.linux-mandrake.com/
-// http://www.mandrakesoft.com/
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-//
-// config.h.in is distributed in the source TAR file. When you run
-// the configure script, it generates config.h with some changes
-// according to your build environment. For example, in config.h.in,
-// SIZEOF_UNSIGNED_CHAR is set to 0. When configure produces config.h
-// it will change "0" to the detected value for your system.
-//
-// config.h contains ONLY preprocessor #defines and a few typedefs.
-// It must be included by both C and C++ files, so it must not
-// contain anything language dependent such as a class declaration.
-//
-
-#ifndef _BX_CONFIG_H_
-#define _BX_CONFIG_H_ 1
-
-///////////////////////////////////////////////////////////////////
-// USER CONFIGURABLE OPTIONS : EDIT ONLY OPTIONS IN THIS SECTION //
-///////////////////////////////////////////////////////////////////
-
-
-#if 1
-// quit_sim is defined in gui/siminterface.h
-#define BX_EXIT(x) SIM->quit_sim (x)
-#else
-// provide the real main and the usual exit.
-#define BX_EXIT(x) ::exit(x)
-#endif
-
-// We have tested the following combinations:
-// * processors=1, bootstrap=0, ioapic_id=1 (uniprocessor system)
-// * processors=2, bootstrap=0, ioapic_id=2
-// * processors=4, bootstrap=0, ioapic_id=4
-#define BX_SUPPORT_SMP 0
-#define BX_BOOTSTRAP_PROCESSOR 0
-#define BX_MAX_SMP_THREADS_SUPPORTED 8
-
-// include in APIC models, required for a multiprocessor system.
-#define BX_SUPPORT_APIC 0
-
-#if (BX_SUPPORT_SMP && !BX_SUPPORT_APIC)
-#error For multiprocessor simulation, BX_SUPPORT_APIC is required.
-#endif
-
-// if simulating Linux, this provides a few more debugging options
-// such as tracing all system calls.
-#define BX_DEBUG_LINUX 0
-
-// adds support for the GNU readline library in the debugger command
-// prompt.
-#define HAVE_LIBREADLINE 0
-#define HAVE_READLINE_HISTORY_H 1
-
-// Define to 1 if you have <locale.h>
-#define HAVE_LOCALE_H 0
-
-// I rebuilt the code which provides timers to IO devices.
-// Setting this to 1 will introduce a little code which
-// will panic out if cases which shouldn't happen occur.
-// Set this to 0 for optimal performance.
-#define BX_TIMER_DEBUG 0
-
-// Settable A20 line. For efficiency, you can disable
-// having a settable A20 line, eliminating conditional
-// code for every physical memory access. You'll have
-// to tell your software not to mess with the A20 line,
-// and accept it as always being on if you change this.
-// 1 = use settable A20 line. (normal)
-// 0 = A20 is like the rest of the address lines
-
-#define BX_SUPPORT_A20 1
-
-// Processor Instructions Per Second
-// To find out what value to use for the 'ips' directive
-// in your '.bochsrc' file, set BX_SHOW_IPS to 1, and
-// run the software in bochs you plan to use most. Bochs
-// will print out periodic IPS ratings. This will change
-// based on the processor mode at the time, and various
-// other factors. You'll get a reasonable estimate though.
-// When you're done, reset BX_SHOW_IPS to 0, do a
-// 'make all-clean', then 'make' again.
-
-#define BX_SHOW_IPS 0
-
-
-#if (BX_SHOW_IPS) && (defined(__MINGW32__) || defined(_MSC_VER))
-#define SIGALRM 14
-#endif
-
-// Compile in support for DMA & FLOPPY IO. You'll need this
-// if you plan to use the floppy drive emulation. But if
-// you're environment doesn't require it, you can change
-// it to 0.
-
-#define BX_DMA_FLOPPY_IO 1
-
-// Default number of Megs of memory to emulate. The
-// 'megs:' directive in the '.bochsrc' file overrides this,
-// allowing per-run settings.
-
-#define BX_DEFAULT_MEM_MEGS 32
-
-// CPU level emulation. Default level is set in
-// the configure script. BX_CPU_LEVEL defines the CPU level
-// to emulate. BX_CPU_LEVEL_HACKED is a hack to define the
-// level of some instructions, so they can be tested before
-// the rest of the emulation is up to that level.
-
-#define BX_CPU_LEVEL 6
-#define BX_CPU_LEVEL_HACKED 6
-
-// emulate x86-64 instruction set?
-#define BX_SUPPORT_X86_64 0
-
-// emulate long physical address (>32 bit)
-#define BX_PHY_ADDRESS_LONG 0
-
-#define BX_HAVE_SLEEP 1
-#define BX_HAVE_MSLEEP 0
-#define BX_HAVE_USLEEP 1
-#define BX_HAVE_NANOSLEEP 1
-#define BX_HAVE_ABORT 1
-#define BX_HAVE_SOCKLEN_T 1
-#define BX_HAVE_SOCKADDR_IN_SIN_LEN 1
-#define BX_HAVE_GETTIMEOFDAY 1
-#if defined(WIN32)
-#define BX_HAVE_REALTIME_USEC 1
-#else
-#define BX_HAVE_REALTIME_USEC (BX_HAVE_GETTIMEOFDAY)
-#endif
-#define BX_HAVE_MKSTEMP 1
-#define BX_HAVE_SYS_MMAN_H 1
-#define BX_HAVE_XPM_H 0
-#define BX_HAVE_TIMELOCAL 1
-#define BX_HAVE_GMTIME 1
-#define BX_HAVE_MKTIME 1
-#define BX_HAVE_NET_IF_H 0
-
-// This turns on Roland Mainz's idle hack. Presently it is specific to the X11
-// and term gui. If people try to enable it elsewhere, give a compile error
-// after the gui definition so that they don't waste their time trying.
-#define BX_USE_IDLE_HACK 0
-
-// Minimum Emulated IPS.
-// This is used in the realtime PIT as well as for checking the
-// IPS value set in the config file.
-#define BX_MIN_IPS 200000
-
-// Minimum and maximum values for SMP quantum variable. Defines
-// how many instructions each CPU could execute execute in one
-// shot (one cpu_loop call)
-#define BX_SMP_QUANTUM_MIN 1
-#define BX_SMP_QUANTUM_MAX 16
-
-// Use Static Member Funtions to eliminate 'this' pointer passing
-// If you want the efficiency of 'C', you can make all the
-// members of the C++ CPU class to be static.
-// This defaults to 1 since it should improve performance, but when
-// SMP mode is enabled, it will be turned off by configure.
-#define BX_USE_CPU_SMF 1
-
-#define BX_USE_MEM_SMF 1
-
-// Use static member functions in IO DEVice emulation modules.
-// For efficiency, use C like functions for IO handling,
-// and declare a device instance at compile time,
-// instead of using 'new' and storing the pointer. This
-// eliminates some overhead, especially for high-use IO
-// devices like the disk drive.
-// 1 = Use static member efficiency (normal)
-// 0 = Use nonstatic member functions (use only if you need
-// multiple instances of a device class
-
-#define BX_USE_HD_SMF 1 // Hard drive
-#define BX_USE_BIOS_SMF 1 // BIOS
-#define BX_USE_CMOS_SMF 1 // CMOS
-#define BX_USE_DMA_SMF 1 // DMA
-#define BX_USE_FD_SMF 1 // Floppy
-#define BX_USE_KEY_SMF 1 // Keyboard
-#define BX_USE_PAR_SMF 1 // Parallel
-#define BX_USE_PIC_SMF 1 // PIC
-#define BX_USE_PIT_SMF 1 // PIT
-#define BX_USE_SER_SMF 1 // Serial
-#define BX_USE_UM_SMF 1 // Unmapped
-#define BX_USE_VGA_SMF 1 // VGA
-#define BX_USE_SB16_SMF 1 // Sound (SB 16)
-#define BX_USE_DEV_SMF 1 // System Devices (port92)
-#define BX_USE_PCI_SMF 1 // PCI
-#define BX_USE_P2I_SMF 1 // PCI-to-ISA bridge
-#define BX_USE_PIDE_SMF 1 // PCI-IDE
-#define BX_USE_PCIVGA_SMF 1 // PCI-VGA
-#define BX_USE_PCIDEV_SMF 1 // PCI-DEV
-#define BX_USE_PCIUSB_SMF 1 // USB hub
-#define BX_USE_PCIPNIC_SMF 1 // PCI pseudo NIC
-#define BX_USE_NE2K_SMF 1 // NE2K
-#define BX_USE_EFI_SMF 1 // External FPU IRQ
-#define BX_USE_GAMEPORT_SMF 1 // Gameport
-#define BX_USE_CIRRUS_SMF 1 // SVGA Cirrus
-#define BX_USE_BUSM_SMF 1 // Bus Mouse
-#define BX_USE_ACPI_SMF 1 // ACPI
-
-#define BX_PLUGINS 0
-#define BX_HAVE_DLFCN_H 1
-
-#if BX_PLUGINS && \
- ( !BX_USE_HD_SMF || !BX_USE_BIOS_SMF || !BX_USE_CMOS_SMF \
- || !BX_USE_DMA_SMF || !BX_USE_FD_SMF || !BX_USE_KEY_SMF \
- || !BX_USE_PAR_SMF || !BX_USE_PIC_SMF || !BX_USE_PIT_SMF \
- || !BX_USE_SER_SMF || !BX_USE_UM_SMF || !BX_USE_VGA_SMF \
- || !BX_USE_SB16_SMF || !BX_USE_DEV_SMF || !BX_USE_PCI_SMF \
- || !BX_USE_P2I_SMF || !BX_USE_PCIVGA_SMF || !BX_USE_PCIUSB_SMF \
- || !BX_USE_PCIPNIC_SMF || !BX_USE_PIDE_SMF || !BX_USE_ACPI_SMF \
- || !BX_USE_NE2K_SMF || !BX_USE_EFI_SMF || !BX_USE_GAMEPORT_SMF \
- || !BX_USE_PCIDEV_SMF || !BX_USE_CIRRUS_SMF)
-#error You must use SMF to have plugins
-#endif
-
-#define BX_SUPPORT_SB16 0
-#define BX_SUPPORT_GAMEPORT 0
-
-#if BX_SUPPORT_SB16
-// Use virtual methods for the sound output functions
-#define BX_USE_SOUND_VIRTUAL 1
-// Determines which sound output class is to be used.
-// Currently the following are available:
-// bx_sound_linux_c Output for Linux, to /dev/dsp and /dev/midi00
-// bx_sound_windows_c Output for Windows midi and wave mappers
-// bx_sound_output_c Dummy functions, no output
-#define BX_SOUND_OUTPUT_C bx_sound_output_c
-// Use ALSA sound interface on Linux
-#define BX_HAVE_ALSASOUND 0
-#endif
-
-#define USE_RAW_SERIAL 0
-
-// This enables writing to port 0xe9 and the output
-// is sent to the console. Reading from port 0xe9
-// will return 0xe9 to let you know this is available.
-// Leave this 0 unless you have a reason to use it.
-#define BX_PORT_E9_HACK 1
-
-#define BX_GDBSTUB 0
-
-// This option enables compressed (zlib) hd support
-#define BX_COMPRESSED_HD_SUPPORT 0
-#define BX_HAVE_ZLIB 1
-
-#if BX_COMPRESSED_HD_SUPPORT && !BX_HAVE_ZLIB
-#error You must have zlib to enable compressed hd support
-#endif
-
-// This option defines the number of supported ATA channels.
-// There are up to two drives per ATA channel.
-#define BX_MAX_ATA_CHANNEL 4
-
-#if (BX_MAX_ATA_CHANNEL>4 || BX_MAX_ATA_CHANNEL<1)
-# error "BX_MAX_ATA_CHANNEL should be between 1 and 4"
-#endif
-
-// =================================================================
-// BEGIN: OPTIONAL DEBUGGER SECTION
-//
-// These options are only used if you compile in support for the
-// native command line debugging environment. Typically, the debugger
-// is not used, and this section can be ignored.
-// =================================================================
-
-// Compile in support for virtual/linear/physical breakpoints.
-// Enable only those you need. Recommend using only linear
-// breakpoints, unless you need others. Less supported means
-// slightly faster execution time.
-#define BX_DBG_MAX_VIR_BPOINTS 16
-#define BX_DBG_MAX_LIN_BPOINTS 16
-#define BX_DBG_MAX_PHY_BPOINTS 16
-
-#define BX_DBG_MAX_WATCHPONTS 16
-
-// max file pathname size for debugger commands
-#define BX_MAX_PATH 256
-// max nesting level for debug scripts including other scripts
-#define BX_INFILE_DEPTH 10
-// use this command to include (nest) debug scripts
-#define BX_INCLUDE_CMD "source"
-
-// Make a call to command line debugger extensions. If set to 1,
-// a call is made. An external routine has a chance to process
-// the command. If it does, than the debugger ignores the command.
-#define BX_DBG_EXTENSIONS 0
-
-// =================================================================
-// END: OPTIONAL DEBUGGER SECTION
-// =================================================================
-
-//////////////////////////////////////////////////////////////////////
-// END OF USER CONFIGURABLE OPTIONS : DON'T EDIT ANYTHING BELOW !!! //
-// THIS IS GENERATED BY THE ./configure SCRIPT //
-//////////////////////////////////////////////////////////////////////
-
-
-#define BX_WITH_X11 0
-#define BX_WITH_BEOS 0
-#define BX_WITH_WIN32 0
-#define BX_WITH_MACOS 0
-#define BX_WITH_CARBON 0
-#define BX_WITH_NOGUI 1
-#define BX_WITH_TERM 0
-#define BX_WITH_RFB 0
-#define BX_WITH_AMIGAOS 0
-#define BX_WITH_SDL 0
-#define BX_WITH_SVGA 0
-#define BX_WITH_WX 0
-
-// BX_USE_TEXTCONFIG should be set to 1 unless Bochs is compiled
-// for wxWidgets only.
-#define BX_USE_TEXTCONFIG 1
-
-// A certain functions must NOT be fastcall even if compiled with fastcall
-// option, and those are callbacks from Windows which are defined either
-// as cdecl or stdcall. The entry point main() also has to remain cdecl.
-#ifndef CDECL
-#if defined(_MSC_VER)
- #define CDECL __cdecl
-#else
- #define CDECL
-#endif
-#endif
-
-// add special export symbols for win32 DLL building. The main code must
-// have __declspec(dllexport) on variables, functions, or classes that the
-// plugins can access. The plugins should #define PLUGGABLE which will
-// activate the __declspec(dllimport) instead.
-#if defined(WIN32) || defined(__CYGWIN__)
-# if BX_PLUGINS && defined(BX_PLUGGABLE)
-// #warning I will import DLL symbols from Bochs main program.
-# define BOCHSAPI __declspec(dllimport)
-# elif BX_PLUGINS
-// #warning I will export DLL symbols.
-# define BOCHSAPI __declspec(dllexport)
-# endif
-#endif
-#ifndef BOCHSAPI
-# define BOCHSAPI
-#endif
-
-#if defined(__CYGWIN__)
-// Make BOCHSAPI_CYGONLY exactly the same as BOCHSAPI. This symbol
-// will be used for any cases where Cygwin requires a special tag
-// but VC++ does not.
-#define BOCHSAPI_CYGONLY BOCHSAPI
-#else
-// define the symbol to be empty
-#define BOCHSAPI_CYGONLY /*empty*/
-#endif
-
-#if defined(_MSC_VER)
-// Make BOCHSAPI_MSVCONLY exactly the same as BOCHSAPI. This symbol
-// will be used for any cases where VC++ requires a special tag
-// but Cygwin does not.
-#define BOCHSAPI_MSVCONLY BOCHSAPI
-#else
-// define the symbol to be empty
-#define BOCHSAPI_MSVCONLY /*empty*/
-#endif
-
-#define BX_DEFAULT_CONFIG_INTERFACE "defined_by_configure"
-#define BX_DEFAULT_DISPLAY_LIBRARY "defined_by_configure"
-
-// Roland Mainz's idle hack is presently specific to X11. If people try to
-// enable it elsewhere, give a compile error so that they don't waste their
-// time trying.
-#if (BX_USE_IDLE_HACK && !BX_WITH_X11 && !BX_WITH_TERM)
-# error IDLE_HACK will only work with the X11 or term gui. Correct configure args and retry.
-#endif
-
-#define WORDS_BIGENDIAN 0
-
-#define SIZEOF_UNSIGNED_CHAR 1
-#define SIZEOF_UNSIGNED_SHORT 2
-#define SIZEOF_UNSIGNED_INT 4
-#define SIZEOF_UNSIGNED_LONG 4
-#define SIZEOF_UNSIGNED_LONG_LONG 8
-#define SIZEOF_INT_P 4
-
-#define BX_64BIT_CONSTANTS_USE_LL 1
-#if BX_64BIT_CONSTANTS_USE_LL
-// doesn't work on Microsoft Visual C++, maybe others
-#define BX_CONST64(x) (x##LL)
-#elif defined(_MSC_VER)
-#define BX_CONST64(x) (x##I64)
-#else
-#define BX_CONST64(x) (x)
-#endif
-
-#if defined(WIN32)
- typedef unsigned char Bit8u;
- typedef signed char Bit8s;
- typedef unsigned short Bit16u;
- typedef signed short Bit16s;
- typedef unsigned int Bit32u;
- typedef signed int Bit32s;
-#ifdef __MINGW32__
- typedef unsigned long long Bit64u;
- typedef signed long long Bit64s;
-#include <sys/types.h>
-#else
- typedef unsigned __int64 Bit64u;
- typedef signed __int64 Bit64s;
-#endif
-#elif BX_WITH_MACOS
- typedef unsigned char Bit8u;
- typedef signed char Bit8s;
- typedef unsigned short Bit16u;
- typedef signed short Bit16s;
- typedef unsigned int Bit32u;
- typedef signed int Bit32s;
- typedef unsigned long long Bit64u;
- typedef signed long long Bit64s;
-#else
-
-// Unix like platforms
-
-#if SIZEOF_UNSIGNED_CHAR != 1
-# error "sizeof (unsigned char) != 1"
-#else
- typedef unsigned char Bit8u;
- typedef signed char Bit8s;
-#endif
-
-#if SIZEOF_UNSIGNED_SHORT != 2
-# error "sizeof (unsigned short) != 2"
-#else
- typedef unsigned short Bit16u;
- typedef signed short Bit16s;
-#endif
-
-#if SIZEOF_UNSIGNED_INT == 4
- typedef unsigned int Bit32u;
- typedef signed int Bit32s;
-#elif SIZEOF_UNSIGNED_LONG == 4
- typedef unsigned long Bit32u;
- typedef signed long Bit32s;
-#else
-# error "can't find sizeof(type) of 4 bytes!"
-#endif
-
-#if SIZEOF_UNSIGNED_LONG == 8
- typedef unsigned long Bit64u;
- typedef signed long Bit64s;
-#elif SIZEOF_UNSIGNED_LONG_LONG == 8
- typedef unsigned long long Bit64u;
- typedef signed long long Bit64s;
-#else
-# error "can't find data type of 8 bytes"
-#endif
-
-#endif
-
-#define GET32L(val64) ((Bit32u)(((Bit64u)(val64)) & 0xFFFFFFFF))
-#define GET32H(val64) ((Bit32u)(((Bit64u)(val64)) >> 32))
-
-// now that Bit32u and Bit64u exist, defined bx_address
-#if BX_SUPPORT_X86_64
-typedef Bit64u bx_address;
-#else
-typedef Bit32u bx_address;
-#endif
-
-// define physical and linear address types
-typedef bx_address bx_lin_address;
-
-#if BX_SUPPORT_X86_64
-#define BX_LIN_ADDRESS_WIDTH 48
-#else
-#define BX_LIN_ADDRESS_WIDTH 32
-#endif
-
-#if BX_PHY_ADDRESS_LONG
-typedef Bit64u bx_phy_address;
-#define BX_PHY_ADDRESS_WIDTH 40
-#else
-typedef Bit32u bx_phy_address;
-#define BX_PHY_ADDRESS_WIDTH 32
-#endif
-
-// technically, in an 8 bit signed the real minimum is -128, not -127.
-// But if you decide to negate -128 you tend to get -128 again, so it's
-// better not to use the absolute maximum in the signed range.
-#define BX_MAX_BIT64U ( (Bit64u) -1 )
-#define BX_MIN_BIT64U ( 0 )
-#define BX_MAX_BIT64S ( ((Bit64u) -1) >> 1 )
-#define BX_MIN_BIT64S ( (Bit64s)-(((Bit64u) -1) >> 1) )
-#define BX_MAX_BIT32U ( (Bit32u) -1 )
-#define BX_MIN_BIT32U ( 0 )
-#define BX_MAX_BIT32S ( ((Bit32u) -1) >> 1 )
-#define BX_MIN_BIT32S ( (Bit32s)-(((Bit32u) -1) >> 1) )
-#define BX_MAX_BIT16U ( (Bit16u) -1 )
-#define BX_MIN_BIT16U ( 0 )
-#define BX_MAX_BIT16S ( ((Bit16u) -1) >> 1 )
-#define BX_MIN_BIT16S ( (Bit16s)-(((Bit16u) -1) >> 1) )
-#define BX_MAX_BIT8U ( (Bit8u) -1 )
-#define BX_MIN_BIT8U ( 0 )
-#define BX_MAX_BIT8S ( ((Bit8u) -1) >> 1 )
-#define BX_MIN_BIT8S ( (Bit8s)-(((Bit8u) -1) >> 1) )
-
-
-// create an unsigned integer type that is the same size as a pointer.
-// You can typecast a pointer to a bx_pr_equiv_t without losing any
-// bits (and without getting the compiler excited). This is used in
-// the FPU emulation code, where pointers and integers are often
-// used interchangeably.
-#if SIZEOF_INT_P == 4
- typedef Bit32u bx_ptr_equiv_t;
-#elif SIZEOF_INT_P == 8
- typedef Bit64u bx_ptr_equiv_t;
-#else
-# error "could not define bx_ptr_equiv_t to size of int*"
-#endif
-
-// Use a boolean type that will not conflict with the builtin type
-// on any system.
-typedef Bit32u bx_bool;
-
-#if BX_WITH_MACOS
-# define bx_ptr_t char *
-#else
-# define bx_ptr_t void *
-#endif
-
-#if defined(WIN32)
-# define BX_LITTLE_ENDIAN
-#elif BX_WITH_MACOS
-# define BX_BIG_ENDIAN
-#else
-#if WORDS_BIGENDIAN
-# define BX_BIG_ENDIAN
-#else
-# define BX_LITTLE_ENDIAN
-#endif
-#endif // defined(WIN32)
-
-
-#if BX_SUPPORT_X86_64
-#ifdef BX_LITTLE_ENDIAN
-typedef
- struct {
- Bit64u lo;
- Bit64u hi;
- } Bit128u;
-typedef
- struct {
- Bit64u lo;
- Bit64s hi;
- } Bit128s;
-#else // must be Big Endian
-typedef
- struct {
- Bit64u hi;
- Bit64u lo;
- } Bit128u;
-typedef
- struct {
- Bit64s hi;
- Bit64u lo;
- } Bit128s;
-#endif
-#endif // #if BX_SUPPORT_X86_64
-
-
-// for now only term.cc requires a GUI sighandler.
-#define BX_GUI_SIGHANDLER (BX_WITH_TERM)
-
-#define HAVE_SIGACTION 1
-
-// configure will change the definition of "inline" to the value
-// that the C compiler allows. It tests the following keywords to
-// see if any is permitted: inline, __inline__, __inline. If none
-// is permitted, it defines inline to be empty.
-#define inline inline
-
-// inline functions in headers that are compiled with C compiler
-// (e.g. fpu code) are declared with BX_C_INLINE macro. Note that
-// the word "inline" itself may now be redefined by the above #define.
-// Many compilers are known to work with "static inline". If the
-// compiler can put the function inline, it does so and never creates
-// a symbol for the function. If optimization is off, or inline is
-// defined to be empty, the static keyword causes the function to create
-// a symbol that's visible only to that .c file. Each .c file that
-// includes the header will produce another local version of the
-// BX_C_INLINE function (not ideal). However without "static" you can
-// duplicate symbol problems which are even worse.
-#define BX_C_INLINE static inline
-
-// Use BX_CPP_INLINE for all C++ inline functions. Note that the
-// word "inline" itself may now be redefined by the above #define.
-#define BX_CPP_INLINE inline
-
-#ifdef __GNUC__
-
-// Some helpful compiler hints for compilers that allow them; GCC for now.
-//
-// BX_CPP_AlignN(n):
-// Align a construct on an n-byte boundary.
-//
-// BX_CPP_AttrPrintf(formatArg, firstArg):
-// This function takes printf-like arguments, so the compiler can check
-// the consistency of the format string and the matching arguments.
-// 'formatArg' is the parameter number (starting from 1) of the format
-// string argument. 'firstArg' is the parameter number of the 1st argument
-// to check against the string argument. NOTE: For non-static member
-// functions, the this-ptr is argument number 1 but is invisible on
-// the function prototype declaration - but you still have to count it.
-//
-// BX_CPP_AttrNoReturn():
-// This function never returns. The compiler can optimize-out following
-// code accordingly.
-
-#define BX_CPP_AlignN(n) __attribute__ ((aligned (n)))
-#define BX_CPP_AttrPrintf(formatArg, firstArg) \
- __attribute__ ((format (printf, formatArg, firstArg)))
-#define BX_CPP_AttrNoReturn() __attribute__ ((noreturn))
-
-#else
-
-#define BX_CPP_AlignN(n) /* Not supported. */
-#define BX_CPP_AttrPrintf(formatArg, firstArg) /* Not supported. */
-#define BX_CPP_AttrNoReturn() /* Not supported. */
-
-#endif
-
-#define BX_DEBUGGER 0
-#define BX_DISASM 1
-
-#if (BX_DEBUGGER == 1) && (BX_DISASM == 0)
-#error Dissembler is required for BX_DEBUGGER !
-#endif
-
-#define BX_PROVIDE_CPU_MEMORY 1
-#define BX_PROVIDE_DEVICE_MODELS 1
-
-#define BX_PROVIDE_MAIN 1
-
-#define BX_INSTRUMENTATION 0
-
-// enable BX_DEBUG/BX_ERROR/BX_INFO messages
-#define BX_NO_LOGGING 0
-
-// enable BX_ASSERT checks
-#define BX_ASSERT_ENABLE 1
-
-// limited i440FX PCI support
-#define BX_SUPPORT_PCI 0
-
-// Bochs VBE display interface
-#define BX_SUPPORT_VBE 1
-
-// CLGD54XX emulation
-#define BX_SUPPORT_CLGD54XX 0
-
-// ACPI controller
-#define BX_SUPPORT_ACPI 0
-
-#if (BX_SUPPORT_ACPI && !BX_SUPPORT_PCI)
-#error To enable ACPI support, you must also enable PCI
-#endif
-
-// Experimental VGA on PCI
-#define BX_SUPPORT_PCIVGA 0
-
-// Experimental host PCI device mapping
-#define BX_SUPPORT_PCIDEV 0
-
-#if (BX_SUPPORT_PCIDEV && !BX_SUPPORT_PCI)
-#error To enable PCI host device mapping, you must also enable PCI
-#endif
-
-// limited USB on PCI
-#define BX_SUPPORT_PCIUSB 0
-
-#if (BX_SUPPORT_PCIUSB && !BX_SUPPORT_PCI)
-#error To enable USB, you must also enable PCI
-#endif
-
-#define BX_SUPPORT_BUSMOUSE 0
-
-#define BX_SUPPORT_ALIGNMENT_CHECK 1
-#define BX_SUPPORT_FPU 1
-#define BX_SUPPORT_MMX 1
-#define BX_SUPPORT_3DNOW 0
-#define BX_SUPPORT_SSE 2
-#define BX_SUPPORT_SSE_EXTENSION 0
-#define BX_SUPPORT_SSE4A 0
-#define BX_SUPPORT_SSE5A 0
-#define BX_SUPPORT_DAZ 1
-#define BX_SUPPORT_MISALIGNED_SSE 0
-#define BX_SUPPORT_SEP 1
-#define BX_SUPPORT_VME 1
-#define BX_SUPPORT_POPCNT 0
-#define BX_SUPPORT_MONITOR_MWAIT 0
-#define BX_SUPPORT_XSAVE 0
-#define BX_SUPPORT_AES 0
-#define BX_SUPPORT_MOVBE 0
-
-#define BX_SUPPORT_MTRR 0
-#define BX_SUPPORT_LARGE_PAGES 0
-#define BX_SUPPORT_GLOBAL_PAGES 0
-#define BX_SUPPORT_PAE 0
-
-#define BX_SupportGuest2HostTLB 0
-#define BX_SupportRepeatSpeedups 0
-#define BX_SupportHostAsms 0
-
-#define BX_SUPPORT_ICACHE 0
-#define BX_SUPPORT_TRACE_CACHE 0
-
-#if (BX_SUPPORT_TRACE_CACHE && BX_SUPPORT_ICACHE==0)
-#error Trace cache optimization cannot be compiled without iCache!
-#endif
-
-#if BX_SUPPORT_3DNOW
- #define BX_CPU_VENDOR_INTEL 0
-#else
- #define BX_CPU_VENDOR_INTEL 1
-#endif
-
-// Maximum CPUID vendor and brand string lengths
-#define BX_CPUID_VENDOR_LEN 12
-#define BX_CPUID_BRAND_LEN 48
-
-// if 1, don't do gpf on MSRs that we don't implement
-#define BX_IGNORE_BAD_MSR 1
-
-// CLFLUSH was introduced together with SSE2 instruction set
-#if BX_SUPPORT_SSE >= 2
- #define BX_SUPPORT_CLFLUSH 1
-#else
- #define BX_SUPPORT_CLFLUSH 0
-#endif
-
-#if (BX_SUPPORT_ALIGNMENT_CHECK && BX_CPU_LEVEL < 4)
-#error Alignment exception check is not supported in i386 !
-#endif
-
-#if (BX_SUPPORT_VME && BX_CPU_LEVEL < 5)
-#error With CPU level < 5, you must disable v8086 mode extensions !
-#endif
-
-#if (BX_SUPPORT_MMX && BX_CPU_LEVEL < 5)
-#error With CPU level < 5, you must disable MMX support !
-#endif
-
-#if (!BX_SUPPORT_FPU && BX_CPU_LEVEL > 4)
-#error With CPU level > 4, you must enable FPU support !
-#endif
-
-#if (BX_SUPPORT_MMX && !BX_SUPPORT_FPU)
-#error "MMX cannot be compiled without FPU support !"
-#endif
-
-#if (BX_SUPPORT_FPU && BX_CPU_LEVEL < 3)
-#error "FPU cannot be compiled without cpu level >= 3 !"
-#endif
-
-#if (BX_SUPPORT_3DNOW && !BX_SUPPORT_MMX)
-#error "3DNow! cannot be compiled without MMX support !"
-#endif
-
-#if (BX_SUPPORT_AES && !BX_SUPPORT_SSE)
-#error "AES cannot be compiled without SSE support !"
-#endif
-
-#if (BX_SUPPORT_XSAVE && !BX_SUPPORT_SSE)
-#error "XSAVE cannot be compiled without SSE support !"
-#endif
-
-#if (BX_SUPPORT_SSE && !BX_SUPPORT_MMX)
-#error "SSE cannot be compiled without FPU+MMX support !"
-#endif
-
-#if (BX_CPU_LEVEL<6 && BX_SUPPORT_SSE)
-#error "SSE is only supported with CPU_LEVEL >= 6 !"
-#endif
-
-#if (BX_CPU_LEVEL<6 && BX_SUPPORT_SEP)
-#error "SYSENTER/SYSEXIT only supported with CPU_LEVEL >= 6 !"
-#endif
-
-#if (BX_SUPPORT_SSE < 3) || (BX_SUPPORT_SSE == 3 && BX_SUPPORT_SSE_EXTENSION == 0)
-#if BX_SUPPORT_MOVBE
- #error "MOVBE only supported with SSE3E !"
-#endif
-#endif
-
-#if (BX_CPU_LEVEL<6 && BX_SUPPORT_PAE)
-#error "Physical Address Extensions (PAE) only supported with CPU_LEVEL >= 6 !"
-#endif
-#if (BX_CPU_LEVEL<6 && BX_SUPPORT_GLOBAL_PAGES)
-#error "Page Global Extension (PGE) only supported with CPU_LEVEL >= 6 !"
-#endif
-#if (BX_CPU_LEVEL<5 && BX_SUPPORT_LARGE_PAGES)
-#error "Page Size Extension (PSE) only supported with CPU_LEVEL >= 5 !"
-#endif
-#if (BX_CPU_LEVEL<6 && BX_SUPPORT_MTRR)
-#error "MTRRs only supported with CPU_LEVEL >= 6 !"
-#endif
-
-#if (BX_SUPPORT_PAE && !BX_SUPPORT_LARGE_PAGES)
-#error "Physical Address Extensions (PAE) requires large pages support !"
-#endif
-
-#if BX_SUPPORT_X86_64
-// Sanity checks to ensure that you cannot accidently use conflicting options.
-
-#if BX_CPU_LEVEL < 6
-#error "X86-64 requires cpu level 6 or greater !"
-#endif
-#if (BX_SUPPORT_SSE<2)
-#error "X86-64 requires SSE2 !"
-#endif
-#if !BX_SUPPORT_PAE
-#error "X86-64 requires Physical Address Extensions (PAE) !"
-#endif
-#if !BX_SUPPORT_GLOBAL_PAGES
-#error "X86-64 requires Page Global Extension (PGE) !"
-#endif
-#if !BX_SUPPORT_LARGE_PAGES
-#error "X86-64 requires Page Size Extension (PSE) !"
-#endif
-#endif
-
-#define BX_HAVE_GETENV 1
-#define BX_HAVE_SETENV 1
-#define BX_HAVE_SELECT 1
-#define BX_HAVE_SNPRINTF 1
-#define BX_HAVE_VSNPRINTF 1
-#define BX_HAVE_STRTOULL 1
-#define BX_HAVE_STRTOUQ 1
-#define BX_HAVE_STRDUP 1
-#define BX_HAVE_STRREV 0
-#define BX_HAVE_STRUCT_TIMEVAL 1
-
-// used in term gui
-#define BX_HAVE_COLOR_SET 0
-#define BX_HAVE_MVHLINE 0
-#define BX_HAVE_MVVLINE 0
-
-
-// set if your compiler does not permit an empty struct
-#define BX_NO_EMPTY_STRUCTS 0
-
-// set if your compiler does not understand __attribute__ after a struct
-#define BX_NO_ATTRIBUTES 0
-#if BX_NO_ATTRIBUTES
-#define GCC_ATTRIBUTE(x) /* attribute not supported */
-#else
-#define GCC_ATTRIBUTE __attribute__
-#endif
-
-// set to use fast function calls
-#define BX_FAST_FUNC_CALL 0
-
-// On gcc2.95+ x86 only
-#if BX_FAST_FUNC_CALL && defined(__i386__) && defined(__GNUC__) && (__GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95))
-#if BX_USE_CPU_SMF == 1
-# define BX_CPP_AttrRegparmN(X) __attribute__((regparm(X)))
-#else
-// FIXME: BX_FAST_FUNC_CALL doesn't work with BX_USE_CPU_SMF = 0
-# define BX_CPP_AttrRegparmN(X) /* Not defined */
-#endif
-#else
-# define BX_CPP_AttrRegparmN(X) /* Not defined */
-#endif
-
-// set if your compiler does not allow label at the end of a {} block
-#define BX_NO_BLANK_LABELS 1
-
-// set if you do have <hash_map>, used in bx_debug/dbg_main.c
-#define BX_HAVE_HASH_MAP 0
-
-// set if you do have <hash_map.h>, used in bx_debug/dbg_main.c
-#define BX_HAVE_HASH_MAP_H 1
-
-// set if you do have <set>, used in bx_debug/dbg_main.c
-#define BX_HAVE_SET 1
-
-// set if you do have <set.h>, used in bx_debug/dbg_main.c
-#define BX_HAVE_SET_H 1
-
-// Support x86 hardware debugger registers and facilites.
-// These are the debug facilites offered by the x86 architecture,
-// not the optional built-in debugger.
-#define BX_X86_DEBUGGER 0
-
-#define BX_SUPPORT_CDROM 1
-
-#if BX_SUPPORT_CDROM
- // This is the C++ class name to use if we are supporting
- // low-level CDROM.
-# define LOWLEVEL_CDROM cdrom_interface
-#endif
-
-// NE2K network emulation
-#define BX_SUPPORT_NE2K 0
-
-// Pseudo PCI NIC
-#define BX_SUPPORT_PCIPNIC 0
-
-#if (BX_SUPPORT_PCIPNIC && !BX_SUPPORT_PCI)
-#error To enable the PCI pseudo NIC, you must also enable PCI
-#endif
-
-// this enables the lowlevel stuff below if one of the NICs is present
-#define BX_NETWORKING 0
-
-#define BX_ETH_NULL_LOGGING 1
-#define BX_ETH_FBSD_LOGGING 1
-
-// determine which NE2K packet mover modules will be enabled
-// (this was moved from iodev/eth.h)
-#define ETH_NULL 1
-#ifdef BX_USE_ETH_ARPBACK
-# define ETH_ARPBACK 1
-#endif
-#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__OpenBSD__) || defined(__NetBSD__) || defined(__NetBSD_kernel__) || defined(__APPLE__)
-#define ETH_FBSD 1
-#endif
-#if defined(linux)
-#define ETH_LINUX 1
-#endif
-#if defined(WIN32)
-#define ETH_WIN32 1
-#endif
-
-// this enables Ethertap packet mover; determined by configure script
-#define HAVE_ETHERTAP 0
-
-// this enables TUN/TAP packet mover; determined by configure script
-#define HAVE_TUNTAP 0
-
-// this enables VDE packet mover; determined by configure script
-#define HAVE_VDE 0
-
-
-// I/O Interface to debug
-#define BX_SUPPORT_IODEBUG 0
-
-// External Debugger
-#define BX_EXTERNAL_DEBUGGER 0
-
-#ifdef WIN32
-#define BX_FLOPPY0_NAME "Floppy Disk A:"
-#define BX_FLOPPY1_NAME "Floppy Disk B:"
-#else
-#define BX_FLOPPY0_NAME "Floppy Disk 0"
-#define BX_FLOPPY1_NAME "Floppy Disk 1"
-#endif
-
-#endif // _BX_CONFIG_H
Added: branches/Cog/processors/IA32/bochs/exploration/Makefile
===================================================================
--- branches/Cog/processors/IA32/bochs/exploration/Makefile (rev 0)
+++ branches/Cog/processors/IA32/bochs/exploration/Makefile 2011-11-12 21:10:06 UTC (rev 2510)
@@ -0,0 +1,20 @@
+CFLAGS=-m32 -I.. -I../../bochs -I../../bochs/cpu -I../../bochs/instrument/stubs -L../cpu -lcpu
+
+all: printcpu printcpucr printcpuxmm
+ ./printcpu >BochsIA32Alien-regs.st
+ ./printcpucr >BochsIA32Alien-cr.st
+ ./printcpuxmm >BochsIA32Alien-xmm.st
+
+clean:
+ rm -f BochsIA32Alien-regs.st BochsIA32Alien-cr.st BochsIA32Alien-xmm.st
+ rm -f printcpu printcpucr printcpuxmm
+ rm -f printcpu.exe printcpucr.exe printcpuxmm.exe
+
+printcpu: printcpu.c
+ g++ -o $@ printcpu.c $(CFLAGS)
+
+printcpucr: printcpucr.c
+ g++ -o $@ printcpucr.c $(CFLAGS)
+
+printcpuxmm: printcpuxmm.c
+ g++ -o $@ printcpuxmm.c $(CFLAGS)
Modified: branches/Cog/processors/IA32/bochs/exploration/printcpu.c
===================================================================
--- branches/Cog/processors/IA32/bochs/exploration/printcpu.c 2011-11-10 02:11:13 UTC (rev 2509)
+++ branches/Cog/processors/IA32/bochs/exploration/printcpu.c 2011-11-12 21:10:06 UTC (rev 2510)
@@ -28,19 +28,13 @@
main()
{
#define stoffsetof(type,field) (offsetof(type,field)+1)
-#if 0
-#define print(r,n) printf(#r "@%d\n", offsetof(BX_CPU_C,gen_reg[n].dword.erx))
-
- printf("EAX@%d\n",offsetof(BX_CPU_C, gen_reg[0].dword.erx));
-
-#else
#define print(r,n) \
printf("!BochsIA32Alien methodsFor: 'accessing' stamp: 'eem %d/%d/%d %d:%02d'!\r"\
- "%s\r\t^self unsignedLongAt: %d! !\r", m,d,y,h,i, lower(#r), \
+ "%s\r\t^self unsignedLongAt: %ld! !\r", m,d,y,h,i, lower(#r), \
stoffsetof(BX_CPU_C,gen_reg[n].dword.erx));\
printf("!BochsIA32Alien methodsFor: 'accessing' stamp: 'eem %d/%d/%d %d:%02d'!\r"\
- "%s: anUnsignedInteger\r\t^self unsignedLongAt: %d put: anUnsignedInteger! !\r", m,d,y,h,i, lower(#r), \
- stoffsetof(BX_CPU_C,gen_reg[n].dword.erx));\
+ "%s: anUnsignedInteger\r\t^self unsignedLongAt: %ld put: anUnsignedInteger! !\r", m,d,y,h,i, lower(#r), \
+ stoffsetof(BX_CPU_C,gen_reg[n].dword.erx))
time_t nowsecs = time(0);
struct tm now = *localtime(&nowsecs);
@@ -52,12 +46,11 @@
printf("\"Hello world!!\"!\r");
printf("!BochsIA32Alien class methodsFor: 'instance creation' stamp: 'eem %d/%d/%d %d:%02d'!\r"
- "dataSize\r\t^%d! !\r", m,d,y,h,i, sizeof(BX_CPU_C));
+ "dataSize\r\t^%ld! !\r", m,d,y,h,i, sizeof(BX_CPU_C));
printf("!BochsIA32Alien methodsFor: 'accessing' stamp: 'eem %d/%d/%d %d:%02d'!\r"
- "eflags\r\t^self unsignedLongAt: %d! !\r", m,d,y,h,i,
- stoffsetof(BX_CPU_C,eflags));
-#endif
+ "eflags\r\t^self unsignedLongAt: %ld! !\r", m,d,y,h,i,
+ stoffsetof(BX_CPU_C,eflags));
print(EAX,BX_32BIT_REG_EAX);
print(EBX,BX_32BIT_REG_EBX);
Modified: branches/Cog/processors/IA32/bochs/exploration/printcpucr.c
===================================================================
--- branches/Cog/processors/IA32/bochs/exploration/printcpucr.c 2011-11-10 02:11:13 UTC (rev 2509)
+++ branches/Cog/processors/IA32/bochs/exploration/printcpucr.c 2011-11-12 21:10:06 UTC (rev 2510)
@@ -32,10 +32,10 @@
#define stoffsetof(type,field) (offsetof(type,field)+1)
#define print(r,ra,len) \
printf("!BochsIA32Alien methodsFor: 'accessing' stamp: 'eem %d/%d/%d %d:%02d'!\r"\
- "%s\r\t^self unsigned" #len "At: %d! !\r", m,d,y,h,i, munge(#r), \
+ "%s\r\t^self unsigned" #len "At: %ld! !\r", m,d,y,h,i, munge(#r), \
stoffsetof(BX_CPU_C,ra));\
printf("!BochsIA32Alien methodsFor: 'accessing' stamp: 'eem %d/%d/%d %d:%02d'!\r"\
- "%s: anUnsignedInteger\r\t^self unsigned" #len "At: %d put: anUnsignedInteger! !\r", m,d,y,h,i, munge(#r), \
+ "%s: anUnsignedInteger\r\t^self unsigned" #len "At: %ld put: anUnsignedInteger! !\r", m,d,y,h,i, munge(#r), \
stoffsetof(BX_CPU_C,ra));
time_t nowsecs = time(0);
Modified: branches/Cog/processors/IA32/bochs/exploration/printcpuxmm.c
===================================================================
--- branches/Cog/processors/IA32/bochs/exploration/printcpuxmm.c 2011-11-10 02:11:13 UTC (rev 2509)
+++ branches/Cog/processors/IA32/bochs/exploration/printcpuxmm.c 2011-11-12 21:10:06 UTC (rev 2510)
@@ -30,10 +30,10 @@
#define stoffsetof(type,field) (offsetof(type,field)+1)
#define print(r,n,lh) \
printf("!BochsIA32Alien methodsFor: 'accessing' stamp: 'eem %d/%d/%d %d:%02d'!\r"\
- "%s\r\t^self unsignedLongLongAt: %d! !\r", m,d,y,h,i, lower(#r), \
+ "%s\r\t^self unsignedLongLongAt: %ld! !\r", m,d,y,h,i, lower(#r), \
stoffsetof(BX_CPU_C,xmm[n]._u64[lh]));\
printf("!BochsIA32Alien methodsFor: 'accessing' stamp: 'eem %d/%d/%d %d:%02d'!\r"\
- "%s: anUnsignedInteger\r\t^self unsignedLongLongAt: %d put: anUnsignedInteger! !\r", m,d,y,h,i, lower(#r), \
+ "%s: anUnsignedInteger\r\t^self unsignedLongLongAt: %ld put: anUnsignedInteger! !\r", m,d,y,h,i, lower(#r), \
stoffsetof(BX_CPU_C,xmm[n]._u64[lh]));\
time_t nowsecs = time(0);
Added: branches/Cog/processors/IA32/linuxbochs/conf.COG
===================================================================
--- branches/Cog/processors/IA32/linuxbochs/conf.COG (rev 0)
+++ branches/Cog/processors/IA32/linuxbochs/conf.COG 2011-11-12 21:10:06 UTC (rev 2510)
@@ -0,0 +1,49 @@
+#!/bin/sh
+
+# this sets up the compile for Cog on linux. Disable as much inessential stuff
+# as possible leaving only the cpu/fpu & memory interface
+
+# build cpu/libcpu.a disasm/libdisasm.a fpu/libfpu.a using
+# $ ./conf.COG
+# $ ../bochs/makeem
+
+set echo
+# CFLAGS="-pipe -O3 -fomit-frame-pointer -finline-functions -falign-loops=16 -falign-jumps=16 -falign-functions=16 -falign-labels=16 -falign-loops-max-skip=15 -falign-jumps-max-skip=15 -fprefetch-loop-arrays $CFLAGS"
+CFLAGS="-m32 $CFLAGS"
+CFLAGS="-Dlongjmp=_longjmp -Dsetjmp=_setjmp $CFLAGS"
+CFLAGS="-pipe -O3 -fomit-frame-pointer -finline-functions $CFLAGS"
+CFLAGS="-g $CFLAGS"
+CPPFLAGS=""
+CXXFLAGS="$CFLAGS"
+
+export CFLAGS
+export CPATH
+export CPPFLAGS
+export CXXFLAGS
+export LDFLAGS
+
+../bochs/configure \
+ --enable-Cog \
+ --enable-cpu-level=6 \
+ --enable-sse=2 \
+ --enable-assert-checks \
+ --with-nogui \
+ --disable-x86-64 \
+ --disable-pae \
+ --disable-large-pages \
+ --disable-global-pages \
+ --disable-mtrr \
+ --disable-sb16 \
+ --disable-ne2000 \
+ --disable-pci \
+ --disable-acpi \
+ --disable-apic \
+ --disable-clgd54xx \
+ --disable-usb \
+ --disable-plugins \
+ ${CONFIGURE_ARGS}
+
+# apic == Advanced programmable Interrupt Controller
+# acpi == Advanced Configuration and Power Interface
+# pci == Peripheral Component Interconnect local bus
+# clgd54xx == Cirrus Logic GD54xx video card
Property changes on: branches/Cog/processors/IA32/linuxbochs/conf.COG
___________________________________________________________________
Added: svn:executable
+ *
Added: branches/Cog/processors/IA32/macbochs/conf.COG
===================================================================
--- branches/Cog/processors/IA32/macbochs/conf.COG (rev 0)
+++ branches/Cog/processors/IA32/macbochs/conf.COG 2011-11-12 21:10:06 UTC (rev 2510)
@@ -0,0 +1,49 @@
+#!/bin/sh
+
+# this sets up the compile for Cog on Mac OS X. Disable as much inessential
+# stuff as possible leaving only the cpu/fpu & memory interface
+
+# build cpu/libcpu.a disasm/libdisasm.a fpu/libfpu.a using
+# $ ./conf.COG
+# $ ../bochs/makeem
+
+set echo
+# CFLAGS="-pipe -O3 -fomit-frame-pointer -finline-functions -falign-loops=16 -falign-jumps=16 -falign-functions=16 -falign-labels=16 -falign-loops-max-skip=15 -falign-jumps-max-skip=15 -fprefetch-loop-arrays $CFLAGS"
+CFLAGS="-m32 $CFLAGS"
+CFLAGS="-Dlongjmp=_longjmp -Dsetjmp=_setjmp $CFLAGS"
+CFLAGS="-pipe -O3 -fomit-frame-pointer -finline-functions $CFLAGS"
+CFLAGS="-g $CFLAGS"
+CPPFLAGS=""
+CXXFLAGS="$CFLAGS"
+
+export CFLAGS
+export CPATH
+export CPPFLAGS
+export CXXFLAGS
+export LDFLAGS
+
+../bochs/configure \
+ --enable-Cog \
+ --enable-cpu-level=6 \
+ --enable-sse=2 \
+ --enable-assert-checks \
+ --with-nogui \
+ --disable-x86-64 \
+ --disable-pae \
+ --disable-large-pages \
+ --disable-global-pages \
+ --disable-mtrr \
+ --disable-sb16 \
+ --disable-ne2000 \
+ --disable-pci \
+ --disable-acpi \
+ --disable-apic \
+ --disable-clgd54xx \
+ --disable-usb \
+ --disable-plugins \
+ ${CONFIGURE_ARGS}
+
+# apic == Advanced programmable Interrupt Controller
+# acpi == Advanced Configuration and Power Interface
+# pci == Peripheral Component Interconnect local bus
+# clgd54xx == Cirrus Logic GD54xx video card
Property changes on: branches/Cog/processors/IA32/macbochs/conf.COG
___________________________________________________________________
Added: svn:executable
+ *
Added: branches/Cog/processors/IA32/winbochs/conf.COG
===================================================================
--- branches/Cog/processors/IA32/winbochs/conf.COG (rev 0)
+++ branches/Cog/processors/IA32/winbochs/conf.COG 2011-11-12 21:10:06 UTC (rev 2510)
@@ -0,0 +1,50 @@
+#!/bin/sh
+
+# this sets up the compile for Cog on win32 under cygwin. Disable as much
+# inessential stuff as possible leaving only the cpu/fpu & memory interface
+
+# build cpu/libcpu.a disasm/libdisasm.a fpu/libfpu.a using
+# $ ./conf.COG
+# $ ../bochs/makeem
+
+set echo
+# CFLAGS="-pipe -O3 -fomit-frame-pointer -finline-functions -falign-loops=16 -falign-jumps=16 -falign-functions=16 -falign-labels=16 -falign-loops-max-skip=15 -falign-jumps-max-skip=15 -fprefetch-loop-arrays $CFLAGS"
+CFLAGS="-m32 $CFLAGS"
+CFLAGS="-Dsetjmp=_setjmp $CFLAGS"
+CFLAGS="-pipe -O3 -fomit-frame-pointer -finline-functions $CFLAGS"
+CFLAGS="-g $CFLAGS"
+CPPFLAGS=""
+CXXFLAGS="$CFLAGS"
+
+export CFLAGS
+export CPATH
+export CPPFLAGS
+export CXXFLAGS
+export LDFLAGS
+
+../bochs/configure \
+ -target=i686-pc-mingw32 \
+ --enable-Cog \
+ --enable-cpu-level=6 \
+ --enable-sse=2 \
+ --enable-assert-checks \
+ --with-nogui \
+ --disable-x86-64 \
+ --disable-pae \
+ --disable-large-pages \
+ --disable-global-pages \
+ --disable-mtrr \
+ --disable-sb16 \
+ --disable-ne2000 \
+ --disable-pci \
+ --disable-acpi \
+ --disable-apic \
+ --disable-clgd54xx \
+ --disable-usb \
+ --disable-plugins \
+ ${CONFIGURE_ARGS}
+
+# apic == Advanced programmable Interrupt Controller
+# acpi == Advanced Configuration and Power Interface
+# pci == Peripheral Component Interconnect local bus
+# clgd54xx == Cirrus Logic GD54xx video card
More information about the Vm-dev
mailing list