[Vm-dev] Ephemerons and VM crash
Guille Polito
guillermopolito at gmail.com
Thu May 26 11:32:07 UTC 2016
Hi Eliot,
- Regarding yesterday's email: yesterday I took the time with Pablo to
read and understand the entire scavenging and I understood that my first
email was nonsense :).
* We were thinking on enhancing the comment in
#scavengeUnfiredEphemeronsInRememberedSet to explain how the remembered
set is managed. It was a bit unclear at first for us that the ephemerons
to fire were being swapped to occupy the first places, which was
important afterwards for firing them.
* Also, there is something that we think is a bug: in the whole
ephemeron processing during scavenging, we check always if the key has
survived the scavenge. However, we never check if the key is old. If the
key is old it looks like the algorithm is treating the ephemerons as
ephemerons to fire, while it should not, isn't it?
- Regarding the images to test, I'm actually using a plain Pharo image
with your changes (+ modifications in the class builder to create
Ephemeric classes). The snippets that I share crash those images.
I'll try to push these changes into Pharo to make it even easier to
reproduce.
- Then, about the finalizer is just a facility as you say. The important
thing is that with those snippets I can reproduce the crashes with
almost 100% probability and no manual intervention :).
Guille
-------- Original Message --------
>
>
>
>
>
> On Wed, May 25, 2016 at 10:46 AM, Eliot Miranda
> <eliot.miranda at gmail.com <mailto:eliot.miranda at gmail.com>> wrote:
>
> Hi Guille,
>
> On Wed, May 25, 2016 at 10:43 AM, Eliot Miranda
> <eliot.miranda at gmail.com <mailto:eliot.miranda at gmail.com>> wrote:
>
> Hi Guille,
>
> first, v important. can you put the image(s) you're
> working with somewhere I can download, and send me a URL? I
> can be more helpful if I can run the tests too.
>
>
> On Wed, May 25, 2016 at 6:24 AM, Guille Polito
> <guillermopolito at gmail.com <mailto:guillermopolito at gmail.com>>
> wrote:
>
>
> Hi again!
>
> I snip most of the old thread to keep the relevant.
>
> -------- Original Message --------
>> 1 - The mourn table is being collected because it is not
>> marked upon creation
>>
>> ===============
>>
>> I decided to move the assignment of marking out into
>> markObjects:
>
> Ok, it looks good for me, I did not know what would be a
> good place to put them without breaking something :)
>>
>>
>> 2 - Accesses to unscannedEphemerons are unaligned
>> ===============
>>
>> Looks good. I've changed all the ephemeron methods to
>> use bytesPerOop, cuz the ephemeron queue contains oops,
>> but your fix is just as good.
>
> cool! I thought so that would be the best.
>>
>>
>>
>> 3 - While debugging I also had a DNU #intAt: in
>> #primitiveIntegerAt
>> ==========================
>>
>> Question: besides reviewing, how should I commit
>> these fixes? one issue per commit? all at once?
>>
>>
>> Typically all at once. What I try and do is commit a
>> large set of related changes in a single commit, so I
>> wouldn't mix the fixes to ephemerons with, say, fixes to
>> time. But equally I'd commit any changes I made to help
>> debugging in the same commit. And all rules are made to
>> be broken ;-).
> ok!
>>
>> Hey, _thank you_! This is really great and ephemerons
>> won't be usable without testing like this. I'm in your debt.
>
> Ha, there is no debt (or at least it would be in the
> opposite direction).
>
> Now I'm working on another crash that I can easily
> reproduce using this script:
>
> Smalltalk supportsQueueingFinalization: true.
> e := (1 to: 200000) collect: [ :i | Ephemeron key:
> (ObjectFinalizer receiver: 'test', 'asd' selector: #logCr)
> value: Object new ].
> Smalltalk garbageCollect.
>
>
> Why the extra level of indirection? The Ephemeron /is/ the object
> finaliser. It can send finalise to its key. Why bother with the
> extra level of wrapper? It's wasteful; especially if we're
> attaching lots of ephemerons to things cuz we want to finalise
> something that has lots of instances.
>
>
> Ignore this stupid question. I see it's an old facility. And it is a
> helpful example :-). Sorry for the noise!
>
> While debugging that in the simulator, we saw with clement
> that during #fireEphemeronsInRememberedSet,
> #fireEphemeronsOnEphemeronList we are always firing,
> tenuring and scavenging ephemerons regardless they are
> marked or not.
>
> fireEphemeronsInRememberedSet
> [SNIP]
> coInterpreter fireEphemeron: ephemeron.
> manager
> storePointerUnchecked: 0
> ofObject: ephemeron
> withValue: (self copyAndForward: (manager
> keyOfEphemeron: ephemeron)).
> (self scavengeReferentsOf: ephemeron)
> [SNIP]
>
> So I put an assertion to check that the key of the
> ephemeron is marked when scavenging and it is not always
> the case...
> self assert: (manager isMarked: (manager
> keyOfEphemeron: ephemeron)).
>
> Is the code wrong? or I'm missing something?
>
>
> The implementation of ephemerons in the scavenger and the
> implementation in mark-sweep are quite different.
>
> Remember that what we're trying to do is find out if an object
> is only referenced from the transitive closure of ephemerons
> or not. And the way that we do that in both cases is avoid
> processing ephemerons whose keys are not yet reachable from
> the roots until all objects reachable from the roots have been
> reached. We do this by putting "unscanned" ephemerons in a
> queue, saving them until later.
>
> In the scavenger the roots are the objects in the remembered
> set, the interpreter state (newMethod etc) and the stack zone,
> and GC is performed by copying all objects reachable from
> these roots in past and new spaces into future space, possibly
> tenuring overflowed objects into old space. In the mark-sweep
> the roots are the specialObjectsArray, the interpreter state
> (newMethod etc) and the stack zone.
>
> In the scavenger (a copying collector) this means that when we
> process the unscanned ephemerons their keys will either have
> been copied into future space or tenured to old space, in
> which case they were reachable from the roots, or they will
> not have been copied yet, in which case they are reachable
> only from ephemerons. So in the scavenger marking is
> irrelevant; in fact /no/ objects should be marked when
> scavenging. The important thing is whether a key is in past
> and new spaces or is in future and old spaces.
>
> In the mark-sweep this means that when we process the
> unscanned ephemerons their keys will either be marked, in
> which case they were reachable from the roots, or unmarked, in
> which case they are reachable only from ephemerons. So the
> assert for marked-ness only makes sense in ephemeron
> processing in the mark-sweep collector.
>
> HTH
>
> Guille
>
>
>>
>>
>> Guille
>>
>> -------- Original Message --------
>>> I see, I probably I need to leave the simulator run
>>> for a longer time... Because running the image using
>>> the assertion VM took some time to crash, it may be
>>> the same case.
>>>
>>> -------- Original Message --------
>>>> Some advance on my side,
>>>>
>>>> - Yes, apparently the image was already broken. I
>>>> started a new one and I can open it with the
>>>> simulator. It seems that as soon as I activate
>>>> Ephemerons and I have alive ephemerons the heap
>>>> corrupts (and since saving the image fires a gc...).
>>>>
>>>> - Then, to catch the moment where the image breaks,
>>>> I prepared my image for debug with the following
>>>> script:
>>>>
>>>> Smalltalk snapshotPrimitive.
>>>> f := ObjectFinalizer receiver: 'Hello' selector:
>>>> #logCr.
>>>> d := EphemeronDictionary new.
>>>> d at: f put: f.
>>>> f := nil.
>>>> Smalltalk supportsQueueingFinalization: true.
>>>> 1 to: 2 do: [ :i | Smalltalk garbageCollect].
>>>>
>>>> Then I opened it with the simulator (latest
>>>> version: VMMaker.oscog-tfel.1864) and I had several
>>>> assertion failures in
>>>>
>>>> keyOfEphemeron: objOop
>>>> "Answer the object the ephemeron guards. This
>>>> is its first element."
>>>> self assert: ((self isNonImmediate: objOop)
>>>> and: [self isEphemeron: objOop]).
>>>> ^self fetchPointer: 0 ofObject: objOop
>>>>
>>>> followedKeyOfEphemeron: objOop
>>>> "Answer the object the ephemeron guards. This
>>>> is its first element."
>>>> self assert: ((self isNonImmediate: objOop)
>>>> and: [self isEphemeron: objOop]).
>>>> ^self followOopField: 0 ofObject: objOop
>>>>
>>>> So, I noticed the following:
>>>>
>>>> - Ephemerons in the unscanned list are marked,
>>>> fired, and the format of ephemerons is changed to a
>>>> non-ephemeron format
>>>> - But they are not removed from the unscanned list
>>>> - then the mark #markAllUnscannedEphemerons fails
>>>> tons of assertions because it expects ephemeron
>>>> objects and the (not-anymore-)ephemeron is still
>>>> there in the unscanned list
>>>>
>>>> self markInactiveEphemerons ifFalse:
>>>> [self fireAllUnscannedEphemerons].
>>>> self markAllUnscannedEphemerons
>>>>
>>>> The strange thing is that if I ignore the
>>>> assertions by proceeding, the thing continues
>>>> normally and it the image does not break...
>>>>
>>>> So I then compiled the VM, with the latest version,
>>>> and in trace mode to compare. I attach the log of
>>>> the stdout. But here there is a résumé
>>>>
>>>> * First I see the same assertions I saw in the
>>>> simulator
>>>>
>>>> (isNonImmediate(objOop)) && (isEphemeron(objOop)) 41155
>>>>
>>>> (isNonImmediate(objOop)) && (isEphemeron(objOop)) 55477
>>>>
>>>> * Then there are tons of repetitions of the same
>>>> assertion:
>>>>
>>>> !(((GIV(mournQueue) != GIV(nilObj)) &&
>>>> (isonObjStack(anEphemeronOrWeakArray,
>>>> GIV(mournQueue))))) 60030
>>>>
>>>> Which I understand it means that we are adding to
>>>> the mourn queue all the time the same object. Which
>>>> is strange because it is a WeakArray with a single
>>>> slot which turns out to be nil (at least at the
>>>> moment I inspected it).
>>>>
>>>> * Then something breaks (!!) Looks like we are
>>>> trying to mark a forwarder. And then I have a
>>>> follow up of assertions which are probably caused
>>>> by the same thing.
>>>>
>>>> !(isForwarded(field)) 49489
>>>>
>>>> (classIndexOf(objToScan)) >
>>>> (isForwardedObjectClassIndexPun()) 49537
>>>>
>>>> (classIndex <= (tagMask())) || (classIndex >=
>>>> (arrayClassIndexPun())) 49403
>>>>
>>>> objCouldBeClassObj(classObj) 49415
>>>>
>>>> addressCouldBeOop(objOop) 59997
>>>>
>>>> addressCouldBeObj(topOfObjStack((0 ==
>>>> (fetchPointerofObject(ObjStackTopx, objStack)) ?
>>>> fetchPointerofObject(ObjStackNextx, objStack) :
>>>> objStack))) 60002
>>>>
>>>> addressCouldBeOop(objOop) 59997
>>>>
>>>> * Finally there are some more
>>>>
>>>> !(isForwarded(field)) 49489
>>>>
>>>> until a segmentation fault arrives while executing
>>>> a fullGC
>>>>
>>>> ../results/pharo[0x80ceaa4]
>>>> ../results/pharo[0x80cfde4]
>>>> ../results/pharo(fullGC+0x9b)[0x80c95ea]
>>>> ../results/pharo[0x80e2d49]
>>>> ../results/pharo[0x80e5f4a]
>>>> ../results/pharo[0x80ebca3]
>>>> ../results/pharo(ceStackOverflow+0xd7)[0x809356a]
>>>> [0x91002c6]
>>>> ../results/pharo(interpret+0x128)[0x8082b38]
>>>> ../results/pharo(main+0x23a)[0x810a7db]
>>>> /lib/i386-linux-gnu/i686/cmov/libc.so.6(__libc_start_main+0xf3)[0xf73b5a63]
>>>> [0x1000]
>>>>
>>>> I'll continue digging a bit more,
>>>> Guille
>>>>
>>>> -------- Original Message --------
>>>>> Hi Guille,
>>>>>
>>>>> On Thu, May 19, 2016 at 12:53 AM, Guille Polito
>>>>> <guillermopolito at gmail.com
>>>>> <mailto:guillermopolito at gmail.com>> wrote:
>>>>>
>>>>>
>>>>>
>>>>> -------- Original Message --------
>>>>>> Hi Guille,
>>>>>>
>>>>>> On Wed, May 18, 2016 at 12:46 AM, Guille
>>>>>> Polito <guillermopolito at gmail.com
>>>>>> <mailto:guillermopolito at gmail.com>> wrote:
>>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> -------- Original Message --------
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Hi Guille, Hi Pablo (and welcome),
>>>>>>>
>>>>>>> On Tue, May 17, 2016 at 8:37 AM, Guille
>>>>>>> Polito <guillermopolito at gmail.com
>>>>>>> <mailto:guillermopolito at gmail.com>> wrote:
>>>>>>>
>>>>>>>
>>>>>>> Hi Eliot, list
>>>>>>>
>>>>>>> I'm working here with Pablo (Tesone)
>>>>>>> on moving forward the Ephemeron
>>>>>>> implementation.
>>>>>>>
>>>>>>
>>>>>>
>>>>>> Where's "here"? Are you in Lille?
>>>>> Yup. Pablo is a new Phd student here :)
>>>>>>
>>>>>>
>>>>>>> We first installed Eliot's
>>>>>>> changeset, added a #mourn method and
>>>>>>> an EphemeronDictionary collection,
>>>>>>> and then started testing something
>>>>>>> like this:
>>>>>>>
>>>>>>> f := ObjectFinalizer receiver:
>>>>>>> 'Hello' selector: #logCr.
>>>>>>> d := EphemeronDictionary new.
>>>>>>>
>>>>>>> d at: f put: f.
>>>>>>>
>>>>>>> f := nil.
>>>>>>> Smalltalk garbageCollect.
>>>>>>>
>>>>>>>
>>>>>>> So this looks like something simulate
>>>>>>> able. Are you able to use the
>>>>>>> simulator? If not, why not?
>>>>>>
>>>>>> For some reason I have that bytesToShift
>>>>>> when opening the image is negative.
>>>>>>
>>>>>>
>>>>>> That is to be expected. In the real VM the
>>>>>> heap is located somewhere well above the
>>>>>> bottom of the address space, typically above
>>>>>> the program code. In the simulator the heap
>>>>>> is located either at 0 (an interpreter or
>>>>>> stack VM) or immediately above the code zone
>>>>>> (in a Cogit VM). So when an image that has
>>>>>> been saved on the real VM is loaded into the
>>>>>> simulator all oops have to be adjusted down
>>>>>> and hence bytesToShift is negative.
>>>>>>
>>>>>>
>>>>>> bytesToShift := objectMemory
>>>>>> memoryBaseForImageRead - oldBaseAddr.
>>>>>> "adjust pointers for zero base address"
>>>>>>
>>>>>> So I cannot continue loading because
>>>>>> addresses become negative and I have
>>>>>> "Improper Store into indexable object
>>>>>> kind of errors".
>>>>>>
>>>>>>
>>>>>> Can you post a back trace? Where is this
>>>>>> happening?
>>>>> I'm working in latest pharo (5.0), using the
>>>>> same source code that is used in the Pharo CI
>>>>> jobs to build the VM (pharo branded). I would
>>>>> expect this branch to be stable, maybe it
>>>>> could be a bit behind your branch of
>>>>> development, but I think Esteban merges regularly.
>>>>>
>>>>>
>>>>> Esteban is very busy trying to get UFFI working,
>>>>> and having just got Pharo 5 released and working
>>>>> on Pharo 6 to be released. I'd prefer it if you
>>>>> used the tip of VMMaker.oscog. Further, that's the
>>>>> package that Clément is using and he's your expert
>>>>> source of local help.
>>>>>
>>>>>
>>>>> I'm executing this,
>>>>>
>>>>> vm := StackInterpreterSimulator
>>>>> newWithOptions: #(#ObjectMemory
>>>>> #Spur32BitMemoryManager ).
>>>>> vm desiredNumStackPages: 8. "Makes simulation
>>>>> faster by creating fewer stack pages."
>>>>> (vm openOn:
>>>>> '/home/guille/Pharo/temp/ephemerons/broken.image')
>>>>> openAsMorph; run.
>>>>>
>>>>> And here is the trace. The error happens while
>>>>> swizzling.
>>>>>
>>>>> LittleEndianBitmap(Object)>>error:
>>>>> LittleEndianBitmap(Object)>>errorImproperStore
>>>>> LittleEndianBitmap(Object)>>at:put:
>>>>> Spur32BitMMLESimulator>>longAt:put:
>>>>> Spur32BitMMLESimulator(SpurMemoryManager)>>swizzleFieldsOfObject:
>>>>> Spur32BitMMLESimulator(SpurMemoryManager)>>adjustAllOopsBy:
>>>>> Spur32BitMMLESimulator(SpurMemoryManager)>>initializeObjectMemory:
>>>>> StackInterpreterSimulatorLSB(StackInterpreter)>>initializeInterpreter:
>>>>> [ self initializeInterpreter: bytesToShift ]
>>>>> in
>>>>> StackInterpreterSimulatorLSB(StackInterpreterSimulator)>>openOn:extraMemory:
>>>>> in Block: [ self initializeInterpreter:
>>>>> bytesToShift ]
>>>>>
>>>>>
>>>>> So the image is presumably already broken? Looks
>>>>> to me like it was corrupted when saved. Can you
>>>>> reproduce the problem that led to this image being
>>>>> broken from a working image?
>>>>>
>>>>>> What version of VMMaker.oscog are you using?
>>>>> Monticello reports VMMaker.oscog-eem.1855.
>>>>> However, I'm not sure I have the right number,
>>>>> because source code is now in git.
>>>>>
>>>>>
>>>>> It would be so great if you could use Monticello,
>>>>> not git, and hence be able to contribute back.
>>>>>
>>>>>> Are you running in Pharo or Squeak? If
>>>>>> you're in Lille you could perhaps visit
>>>>>> Clément's office and get him to take a look.
>>>>>> Clément, would that be ok?
>>>>> I'll maybe see it with clement, but today I
>>>>> have to work on some other project...
>>>>>>
>>>>>>> When debugging the VM there are two main
>>>>>>> levels of support, one is the simulator
>>>>>>> where there is maximum support for
>>>>>>> debugging:
>>>>>>> - asserts on all the time
>>>>>>> - arbitrary breakpoints
>>>>>>> - attempting every GC in a copy of the
>>>>>>> heap before doing the real GC so that
>>>>>>> bugs in the GC can be investigated
>>>>>>> without needing to construct a
>>>>>>> reproducible case after a crash
>>>>>>> - the Smalltalk environment to inspect
>>>>>>> and browse
>>>>>>>
>>>>>>> The next level is the assert and debug
>>>>>>> VMs. If you look in the build
>>>>>>> directories on the Cog svn branch you'll
>>>>>>> see that all of them build three VMs, a
>>>>>>> production VM with maximum optimisation
>>>>>>> and asserts excluded, an assert VM with
>>>>>>> -O1 and asserts enabled, and a debug VM
>>>>>>> with -O0 and asserts enabled. So if you
>>>>>>> either don't see the bug in the
>>>>>>> simulator, or the simulator is too slow
>>>>>>> for the case being examined, or if the
>>>>>>> bug doesn't show up in the simulator
>>>>>>> (the worst of all worlds), build both
>>>>>>> assert and debug VMs and run with the
>>>>>>> assert VM first.
>>>>>>>
>>>>>> Well so far we were using a VM compiled
>>>>>> for debug with a graphical C debugger. It
>>>>>> was not so bad. However, I cannot say I'm
>>>>>> missing a better debugger.
>>>>>>
>>>>>>
>>>>>> "Compiled for debug" is vague. Do you mean
>>>>>> it is compiled with -g -O0, or in addition is
>>>>>> compiled with -g -O0 -DDEBUGVM=0 -DNDEBUG=1?
>>>>> That would exactly be:
>>>>>
>>>>> { '-g3'.
>>>>> '-O0'.
>>>>> '-msse2'.
>>>>> '-D_GNU_SOURCE'.
>>>>> '-DITIMER_HEARTBEAT=1'.
>>>>> '-DNO_VM_PROFILE=1'.
>>>>> '-DDEBUGVM=1'.
>>>>> '-DNDEBUG' }
>>>>>
>>>>> And Esteban told me to compile it with
>>>>> '-UNDEBUG' to get more information, but I did
>>>>> not try this yet.
>>>>>
>>>>>
>>>>> Yes. NDEBUG is what turns off asserts. You don't
>>>>> have a proper assert or debug VM unless you do not
>>>>> use -NDEBUG.
>>>>>
>>>>> Thanks!
>>>>>
>>>>>>> Note that there is a heap leak checker
>>>>>>> which can be enabled both in the
>>>>>>> simulator and the assert and debug VMs.
>>>>>>> See the checkForLeaks method and the
>>>>>>> -leakcheck argument.
>>>>>>
>>>>>> ok!
>>>>>>>
>>>>>>> Without the simulator or the assert and
>>>>>>> debug VMs you are flying blind. It is
>>>>>>> /really/ productive to use the simulator
>>>>>>> for debugging, provided the bug is
>>>>>>> reproducible within a short amount of
>>>>>>> time, as for example your case is above.
>>>>>>
>>>>>> Ok, gotcha! By this afternoon I'll have
>>>>>> some news probably.
>>>>>>
>>>>>> Thanks a lot!
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> However, as soon as we garbage
>>>>>>> collect twice, we have a VM crash.
>>>>>>> We started debugging the VM to see
>>>>>>> if we could have some more clues.
>>>>>>>
>>>>>>> The first thing we noticed is that
>>>>>>> the first time the GC runs, the
>>>>>>> mournQueue is nil. This is of course
>>>>>>> expected because the new
>>>>>>> finalization mechanism was not
>>>>>>> active and then there was no need to
>>>>>>> create the mournQueue. We saw that
>>>>>>> the mournQueue is actually created
>>>>>>> in a lazy fashion when putting
>>>>>>> queuing a mourned object (I refer
>>>>>>> myself to #queueMourner: and
>>>>>>> #ensureRoomOnObjStackAt:). So the
>>>>>>> second time the GC passes, the
>>>>>>> mournQueue is there. So far ok, but
>>>>>>> still crashing.
>>>>>>>
>>>>>>> The crash happens in the call to
>>>>>>>
>>>>>>> markAndTraceObjStackandContents(GIV(mournQueue),
>>>>>>> 1);
>>>>>>>
>>>>>>> after the
>>>>>>>
>>>>>>> if (!markAndTraceContents) {
>>>>>>> return;
>>>>>>> }
>>>>>>>
>>>>>>> But when understanding why, it
>>>>>>> starts being less clear to us :). We
>>>>>>> used the printObjStack() function
>>>>>>> and we saw that:
>>>>>>>
>>>>>>> call printObjStack(markStack)
>>>>>>> call printObjStack(weaklingStack)
>>>>>>>
>>>>>>> and we saw in the console some
>>>>>>> output that makes sense. However,
>>>>>>> printing the mournQueue in the same
>>>>>>> manner produces some strange output
>>>>>>>
>>>>>>> call printObjStack(mournQueue)
>>>>>>>
>>>>>>> head 0xb06e980 cx 18 (18) fmt 10
>>>>>>> (10) sz 4092 (4092) myx: 4098 (4098)
>>>>>>> unmkd
>>>>>>> topx: 14 next: 0x0 free: 0x0
>>>>>>>
>>>>>>> We noticed that free and next are
>>>>>>> 0x0 while the others are not...
>>>>>>>
>>>>>>> Finally we saw there is
>>>>>>> isValidObjStack(), that gave us the
>>>>>>> following results:
>>>>>>>
>>>>>>> call isValidObjStack(markStack) => 1
>>>>>>>
>>>>>>> call isValidObjStack(weaklingStack) => 0
>>>>>>> p objStackInvalidBecause = "marking
>>>>>>> but page is unmarked"
>>>>>>>
>>>>>>> call isValidObjStack(mournQueue) => 0
>>>>>>> p objStackInvalidBecause = "marking
>>>>>>> but page is unmarked"
>>>>>>>
>>>>>>>
>>>>>>> So we assume that the stack creation
>>>>>>> is wrong? We are a bit lost in here.
>>>>>>>
>>>>>>> Guille and Pablo
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> _,,,^..^,,,_
>>>>>>> best, Eliot
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> _,,,^..^,,,_
>>>>>> best, Eliot
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> _,,,^..^,,,_
>>>>> best, Eliot
>>>>
>>>
>>
>>
>>
>>
>> --
>> _,,,^..^,,,_
>> best, Eliot
>
>
>
>
>
> --
> _,,,^..^,,,_
> best, Eliot
>
>
>
>
> --
> _,,,^..^,,,_
> best, Eliot
>
>
>
>
> --
> _,,,^..^,,,_
> best, Eliot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.squeakfoundation.org/pipermail/vm-dev/attachments/20160526/4ca5df71/attachment-0001.htm
More information about the Vm-dev
mailing list