Hi all,
Recently I installed OpenSuse 11.1 in my work machine, and I'm trying to get Squeak working.
I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from http://www.squeakvm.org/unix/
I tried to launch ./INSTALL but it told me: "Your architecture appears to be: x86_64-linux-gnu.
No binaries/libraries found for x86_64-linux-gnu. You might have tell INSTALL whch cpu-vendor-os to use."
To avoid to build a VM, I forced with ./INSTALL i686-pc-linux-gnu/
it installed, but, when I tried to start it, I get: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak Squeak3.10.2-7179-basic.image could not find display driver vm-display-X11; either: - check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists, or - use the '-plugins <path>' option to tell me where it is, or - remove DISPLAY from your environment. Abortado
My vm-display.X11 looks like: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin ImmX11Plugin MIDIPlugin OggPlugin squeak UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do vm-sound-NAS XDisplayControlPlugin B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null vm- display-X11.so vm-sound-null ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 vm- sound-ALSA vm-sound-OSS glpunzi@dhcppc2:~/desarrollo/squeak.3.10>
I had vm-display-X11 and I supposed about a symbolic link is needed, and I create it (the vm-display-X11.so above is my symlink), but still don't working.
Someone could give me some advice?
Cheers.
Hi,
Try a
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so
or
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11
and look at what libraries vm-disply-X11 wants. That might point you in some direction.
cheers
bruce
On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote:
Hi all,
Recently I installed OpenSuse 11.1 in my work machine, and I'm trying to get Squeak working.
I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from http://www.squeakvm.org/unix/
I tried to launch ./INSTALL but it told me: "Your architecture appears to be: x86_64-linux-gnu.
No binaries/libraries found for x86_64-linux-gnu. You might have tell INSTALL whch cpu-vendor-os to use."
To avoid to build a VM, I forced with ./INSTALL i686-pc-linux-gnu/
it installed, but, when I tried to start it, I get: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak Squeak3.10.2-7179-basic.image could not find display driver vm-display-X11; either:
- check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists, or
- use the '-plugins <path>' option to tell me where it is, or
- remove DISPLAY from your environment.
Abortado
My vm-display.X11 looks like: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin ImmX11Plugin MIDIPlugin OggPlugin squeak UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do vm-sound-NAS XDisplayControlPlugin B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null vm- display-X11.so vm-sound-null ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 vm- sound-ALSA vm-sound-OSS glpunzi@dhcppc2:~/desarrollo/squeak.3.10>
I had vm-display-X11 and I supposed about a symbolic link is needed, and I create it (the vm-display-X11.so above is my symlink), but still don't working.
Someone could give me some advice?
Cheers.
Hi, thanks in advance for your answer.
The output is: glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 linux-gate.so.1 => (0xffffe000) libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) libGL.so.1 => not found libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) libm.so.6 => /lib/libm.so.6 (0xf7f06000) libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) libc.so.6 => /lib/libc.so.6 (0xf7c5e000) libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) /lib/ld-linux.so.2 (0xf7fab000) libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000)
Could be libGL the problem?
libGL.so.1 is provided by Mesa package, but is installed. It puts the file on /usr/lib64
El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió:
Hi,
Try a
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so
or
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11
and look at what libraries vm-disply-X11 wants. That might point you in some direction.
cheers
bruce
On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote:
Hi all,
Recently I installed OpenSuse 11.1 in my work machine, and I'm trying to get Squeak working.
I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from http://www.squeakvm.org/unix/
I tried to launch ./INSTALL but it told me: "Your architecture appears to be: x86_64-linux-gnu.
No binaries/libraries found for x86_64-linux-gnu. You might have tell INSTALL whch cpu-vendor-os to use."
To avoid to build a VM, I forced with ./INSTALL i686-pc-linux-gnu/
it installed, but, when I tried to start it, I get: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak Squeak3.10.2-7179-basic.image could not find display driver vm-display-X11; either:
- check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists, or
- use the '-plugins <path>' option to tell me where it is, or
- remove DISPLAY from your environment.
Abortado
My vm-display.X11 looks like: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin ImmX11Plugin MIDIPlugin OggPlugin squeak UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do vm-sound-NAS XDisplayControlPlugin B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null vm- display-X11.so vm-sound-null ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 vm- sound-ALSA vm-sound-OSS glpunzi@dhcppc2:~/desarrollo/squeak.3.10>
I had vm-display-X11 and I supposed about a symbolic link is needed, and I create it (the vm-display-X11.so above is my symlink), but still don't working.
Someone could give me some advice?
Cheers.
On Mon, May 18, 2009 at 2:38 PM, Giuseppe Luigi Punzi < glpunzi@lordzealon.com> wrote:
Hi, thanks in advance for your answer.
The output is: glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 linux-gate.so.1 => (0xffffe000) libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) libGL.so.1 => not found libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) libm.so.6 => /lib/libm.so.6 (0xf7f06000) libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) libc.so.6 => /lib/libc.so.6 (0xf7c5e000) libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) /lib/ld-linux.so.2 (0xf7fab000) libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000)
Could be libGL the problem?
libGL.so.1 is provided by Mesa package, but is installed. It puts the file on /usr/lib64
what about doing an ln to /usr/lib ? just to see if works
El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió:
Hi,
Try a
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so
or
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11
and look at what libraries vm-disply-X11 wants. That might point you in some direction.
cheers
bruce
On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote:
Hi all,
Recently I installed OpenSuse 11.1 in my work machine, and I'm trying
to
get Squeak working.
I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from http://www.squeakvm.org/unix/
I tried to launch ./INSTALL but it told me: "Your architecture appears to be: x86_64-linux-gnu.
No binaries/libraries found for x86_64-linux-gnu. You might have tell INSTALL whch cpu-vendor-os to use."
To avoid to build a VM, I forced with ./INSTALL i686-pc-linux-gnu/
it installed, but, when I tried to start it, I get: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak Squeak3.10.2-7179-basic.image could not find display driver vm-display-X11; either:
- check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists,
or
- use the '-plugins <path>' option to tell me where it is, or
- remove DISPLAY from your environment.
Abortado
My vm-display.X11 looks like: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin ImmX11Plugin MIDIPlugin OggPlugin squeak UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do vm-sound-NAS XDisplayControlPlugin B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null vm- display-X11.so vm-sound-null ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 vm- sound-ALSA vm-sound-OSS glpunzi@dhcppc2:~/desarrollo/squeak.3.10>
I had vm-display-X11 and I supposed about a symbolic link is needed,
and
I create it (the vm-display-X11.so above is my symlink), but still
don't
working.
Someone could give me some advice?
Cheers.
Don't works :(
El Monday 18 May 2009 17:42:38 Mariano Martinez Peck escribió:
On Mon, May 18, 2009 at 2:38 PM, Giuseppe Luigi Punzi <
glpunzi@lordzealon.com> wrote:
Hi, thanks in advance for your answer.
The output is: glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 linux-gate.so.1 => (0xffffe000) libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) libGL.so.1 => not found libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) libm.so.6 => /lib/libm.so.6 (0xf7f06000) libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) libc.so.6 => /lib/libc.so.6 (0xf7c5e000) libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) /lib/ld-linux.so.2 (0xf7fab000) libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000)
Could be libGL the problem?
libGL.so.1 is provided by Mesa package, but is installed. It puts the file on /usr/lib64
what about doing an ln to /usr/lib ? just to see if works
El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió:
Hi,
Try a
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so
or
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11
and look at what libraries vm-disply-X11 wants. That might point you in some direction.
cheers
bruce
On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote:
Hi all,
Recently I installed OpenSuse 11.1 in my work machine, and I'm trying
to
get Squeak working.
I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from http://www.squeakvm.org/unix/
I tried to launch ./INSTALL but it told me: "Your architecture appears to be: x86_64-linux-gnu.
No binaries/libraries found for x86_64-linux-gnu. You might have tell INSTALL whch cpu-vendor-os to use."
To avoid to build a VM, I forced with ./INSTALL i686-pc-linux-gnu/
it installed, but, when I tried to start it, I get: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak Squeak3.10.2-7179-basic.image could not find display driver vm-display-X11; either:
- check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists,
or
- use the '-plugins <path>' option to tell me where it is, or
- remove DISPLAY from your environment.
Abortado
My vm-display.X11 looks like: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin ImmX11Plugin MIDIPlugin OggPlugin squeak UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do vm-sound-NAS XDisplayControlPlugin B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null vm- display-X11.so vm-sound-null ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 vm- sound-ALSA vm-sound-OSS glpunzi@dhcppc2:~/desarrollo/squeak.3.10>
I had vm-display-X11 and I supposed about a symbolic link is needed,
and
I create it (the vm-display-X11.so above is my symlink), but still
don't
working.
Someone could give me some advice?
Cheers.
You could try the olpc Squeak VM which is built without GL support:
http://etoys.laptop.org/rpms/squeak-vm-3.10-3olpc11.i386.rpm
- Bert -
On 18.05.2009, at 09:19, Giuseppe Luigi Punzi wrote:
Don't works :(
El Monday 18 May 2009 17:42:38 Mariano Martinez Peck escribió:
On Mon, May 18, 2009 at 2:38 PM, Giuseppe Luigi Punzi <
glpunzi@lordzealon.com> wrote:
Hi, thanks in advance for your answer.
The output is: glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 linux-gate.so.1 => (0xffffe000) libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) libGL.so.1 => not found libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) libm.so.6 => /lib/libm.so.6 (0xf7f06000) libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) libc.so.6 => /lib/libc.so.6 (0xf7c5e000) libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) /lib/ld-linux.so.2 (0xf7fab000) libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000)
Could be libGL the problem?
libGL.so.1 is provided by Mesa package, but is installed. It puts the file on /usr/lib64
what about doing an ln to /usr/lib ? just to see if works
El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió:
Hi,
Try a
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so
or
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11
and look at what libraries vm-disply-X11 wants. That might point you in some direction.
cheers
bruce
On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote:
Hi all,
Recently I installed OpenSuse 11.1 in my work machine, and I'm trying
to
get Squeak working.
I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from http://www.squeakvm.org/unix/
I tried to launch ./INSTALL but it told me: "Your architecture appears to be: x86_64-linux-gnu.
No binaries/libraries found for x86_64-linux-gnu. You might have tell INSTALL whch cpu-vendor-os to use."
To avoid to build a VM, I forced with ./INSTALL i686-pc-linux-gnu/
it installed, but, when I tried to start it, I get: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak Squeak3.10.2-7179-basic.image could not find display driver vm-display-X11; either:
- check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so
exists,
or
- use the '-plugins <path>' option to tell me where it is, or
- remove DISPLAY from your environment.
Abortado
My vm-display.X11 looks like: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin ImmX11Plugin MIDIPlugin OggPlugin squeak UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do vm-sound-NAS XDisplayControlPlugin B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin PseudoTTYPlugin Squeak3D UUIDPlugin vm-display- null vm- display-X11.so vm-sound-null ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display- X11 vm- sound-ALSA vm-sound-OSS glpunzi@dhcppc2:~/desarrollo/squeak.3.10>
I had vm-display-X11 and I supposed about a symbolic link is needed,
and
I create it (the vm-display-X11.so above is my symlink), but still
don't
working.
Someone could give me some advice?
Cheers.
Hi,
As Bert recommended, the VM built without GL support might be the way to go.
The other choice is to figure out what SuSE calls the 32 bit version of Mesa, and install that.
You can't call a 64 bit library from 32 bit code. Well, that's not 100% true, but, let's just leave it there rather than add paragraphs which won't really solve the problem anyway.
cheers
bruce
On Mon, May 18, 2009 at 06:19:04PM +0200, Giuseppe Luigi Punzi wrote:
Don't works :(
El Monday 18 May 2009 17:42:38 Mariano Martinez Peck escribió:
On Mon, May 18, 2009 at 2:38 PM, Giuseppe Luigi Punzi <
glpunzi@lordzealon.com> wrote:
Hi, thanks in advance for your answer.
The output is: glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 linux-gate.so.1 => (0xffffe000) libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) libGL.so.1 => not found libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) libm.so.6 => /lib/libm.so.6 (0xf7f06000) libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) libc.so.6 => /lib/libc.so.6 (0xf7c5e000) libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) /lib/ld-linux.so.2 (0xf7fab000) libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000)
Could be libGL the problem?
libGL.so.1 is provided by Mesa package, but is installed. It puts the file on /usr/lib64
what about doing an ln to /usr/lib ? just to see if works
El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió:
Hi,
Try a
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so
or
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11
and look at what libraries vm-disply-X11 wants. That might point you in some direction.
cheers
bruce
On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote:
Hi all,
Recently I installed OpenSuse 11.1 in my work machine, and I'm trying
to
get Squeak working.
I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from http://www.squeakvm.org/unix/
I tried to launch ./INSTALL but it told me: "Your architecture appears to be: x86_64-linux-gnu.
No binaries/libraries found for x86_64-linux-gnu. You might have tell INSTALL whch cpu-vendor-os to use."
To avoid to build a VM, I forced with ./INSTALL i686-pc-linux-gnu/
it installed, but, when I tried to start it, I get: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak Squeak3.10.2-7179-basic.image could not find display driver vm-display-X11; either:
- check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists,
or
- use the '-plugins <path>' option to tell me where it is, or
- remove DISPLAY from your environment.
Abortado
My vm-display.X11 looks like: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin ImmX11Plugin MIDIPlugin OggPlugin squeak UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do vm-sound-NAS XDisplayControlPlugin B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null vm- display-X11.so vm-sound-null ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 vm- sound-ALSA vm-sound-OSS glpunzi@dhcppc2:~/desarrollo/squeak.3.10>
I had vm-display-X11 and I supposed about a symbolic link is needed,
and
I create it (the vm-display-X11.so above is my symlink), but still
don't
working.
Someone could give me some advice?
Cheers.
Hi,
Keep in mind that I do not use OpenSUSE so this might be completely wrong.
If you figure out which rpm you got /usr/lib64/libGL.so.1 from, you need to install that same RPM but the i568 one rather than x86_64 one.
Guessing, ie, proceed at your own risk, I think that Mesa-7.4.2-1.3.i586.rpm would do it.
It looks like you can get it from http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_11.1/i586/
cheers
bruce
On Mon, May 18, 2009 at 10:07:24PM +0200, Bruce O'Neel wrote:
Hi,
As Bert recommended, the VM built without GL support might be the way to go.
The other choice is to figure out what SuSE calls the 32 bit version of Mesa, and install that.
You can't call a 64 bit library from 32 bit code. Well, that's not 100% true, but, let's just leave it there rather than add paragraphs which won't really solve the problem anyway.
cheers
bruce
On Mon, May 18, 2009 at 06:19:04PM +0200, Giuseppe Luigi Punzi wrote:
Don't works :(
El Monday 18 May 2009 17:42:38 Mariano Martinez Peck escribió:
On Mon, May 18, 2009 at 2:38 PM, Giuseppe Luigi Punzi <
glpunzi@lordzealon.com> wrote:
Hi, thanks in advance for your answer.
The output is: glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 linux-gate.so.1 => (0xffffe000) libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) libGL.so.1 => not found libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) libm.so.6 => /lib/libm.so.6 (0xf7f06000) libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) libc.so.6 => /lib/libc.so.6 (0xf7c5e000) libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) /lib/ld-linux.so.2 (0xf7fab000) libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000)
Could be libGL the problem?
libGL.so.1 is provided by Mesa package, but is installed. It puts the file on /usr/lib64
what about doing an ln to /usr/lib ? just to see if works
El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió:
Hi,
Try a
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so
or
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11
and look at what libraries vm-disply-X11 wants. That might point you in some direction.
cheers
bruce
On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote:
Hi all,
Recently I installed OpenSuse 11.1 in my work machine, and I'm trying
to
get Squeak working.
I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from http://www.squeakvm.org/unix/
I tried to launch ./INSTALL but it told me: "Your architecture appears to be: x86_64-linux-gnu.
No binaries/libraries found for x86_64-linux-gnu. You might have tell INSTALL whch cpu-vendor-os to use."
To avoid to build a VM, I forced with ./INSTALL i686-pc-linux-gnu/
it installed, but, when I tried to start it, I get: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak Squeak3.10.2-7179-basic.image could not find display driver vm-display-X11; either:
- check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists,
or
- use the '-plugins <path>' option to tell me where it is, or
- remove DISPLAY from your environment.
Abortado
My vm-display.X11 looks like: glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin ImmX11Plugin MIDIPlugin OggPlugin squeak UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do vm-sound-NAS XDisplayControlPlugin B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null vm- display-X11.so vm-sound-null ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 vm- sound-ALSA vm-sound-OSS glpunzi@dhcppc2:~/desarrollo/squeak.3.10>
I had vm-display-X11 and I supposed about a symbolic link is needed,
and
I create it (the vm-display-X11.so above is my symlink), but still
don't
working.
Someone could give me some advice?
Cheers.
Hi again,
Sorry, for the delay, but my OpenSuse box is at work, and I didn't have time to check this.
I didn't tried this option yet. Some minutes ago, tried specifying the plugins directory, and worked: squeak -plugins /usr/lib/squeak/3.10-3/
And squeak -h gives me this output: glpunzi@info01:~/desarrollo/squeak.3.10> squeak -help Usage: squeak [<option>...] [<imageName> [<argument>...]] squeak [<option>...] -- [<argument>...] . . [The diferent options] . .
Notes: <imageName> defaults to `squeak.image'. -vtlock disables keyboard vt switching even when -vtswitch is enabled If `-memory' is not specified then the heap will grow dynamically. <argument>s are ignored, but are processed by the Squeak image. The first <argument> normally names a Squeak `script' to execute. Precede <arguments> by `--' to use default image.
Available drivers: vm-sound-null vm-sound-ALSA vm-sound-OSS vm-display-null vm-display-fbdev
Seems, for some reason, don't find vm-display-X11 by default.
On mar, 2009-05-19 at 12:56 +0200, Bruce O'Neel wrote:
Hi,
Keep in mind that I do not use OpenSUSE so this might be completely wrong.
If you figure out which rpm you got /usr/lib64/libGL.so.1 from, you need to install that same RPM but the i568 one rather than x86_64 one.
Guessing, ie, proceed at your own risk, I think that Mesa-7.4.2-1.3.i586.rpm would do it.
It looks like you can get it from http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_11.1/i586/
cheers
bruce
On Mon, May 18, 2009 at 10:07:24PM +0200, Bruce O'Neel wrote:
Hi,
As Bert recommended, the VM built without GL support might be the way to go.
The other choice is to figure out what SuSE calls the 32 bit version of Mesa, and install that.
You can't call a 64 bit library from 32 bit code. Well, that's not 100% true, but, let's just leave it there rather than add paragraphs which won't really solve the problem anyway.
cheers
bruce
On Mon, May 18, 2009 at 06:19:04PM +0200, Giuseppe Luigi Punzi wrote:
Don't works :(
El Monday 18 May 2009 17:42:38 Mariano Martinez Peck escribió:
On Mon, May 18, 2009 at 2:38 PM, Giuseppe Luigi Punzi <
glpunzi@lordzealon.com> wrote:
Hi, thanks in advance for your answer.
The output is: glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 linux-gate.so.1 => (0xffffe000) libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) libGL.so.1 => not found libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) libm.so.6 => /lib/libm.so.6 (0xf7f06000) libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) libc.so.6 => /lib/libc.so.6 (0xf7c5e000) libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) /lib/ld-linux.so.2 (0xf7fab000) libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000)
Could be libGL the problem?
libGL.so.1 is provided by Mesa package, but is installed. It puts the file on /usr/lib64
what about doing an ln to /usr/lib ? just to see if works
El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió:
Hi,
Try a
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so
or
ldd /usr/local/lib/squeak/3.10-4/vm-display-X11
and look at what libraries vm-disply-X11 wants. That might point you in some direction.
cheers
bruce
On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote: > Hi all, > > Recently I installed OpenSuse 11.1 in my work machine, and I'm trying
to
> get Squeak working. > > I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from > http://www.squeakvm.org/unix/ > > I tried to launch ./INSTALL but it told me: > "Your architecture appears to be: x86_64-linux-gnu. > > No binaries/libraries found for x86_64-linux-gnu. > You might have tell INSTALL whch cpu-vendor-os to use." > > To avoid to build a VM, I forced with > ./INSTALL i686-pc-linux-gnu/ > > it installed, but, when I tried to start it, I get: > glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak > Squeak3.10.2-7179-basic.image could not find display driver > vm-display-X11; either: > - check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists,
or
> - use the '-plugins <path>' option to tell me where it is, or > - remove DISPLAY from your environment. > Abortado > > My vm-display.X11 looks like: > glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls > /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin > ImmX11Plugin MIDIPlugin OggPlugin squeak > UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do > vm-sound-NAS XDisplayControlPlugin > B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin > PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null > vm- display-X11.so vm-sound-null > ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so > RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 > vm- sound-ALSA vm-sound-OSS > glpunzi@dhcppc2:~/desarrollo/squeak.3.10> > > I had vm-display-X11 and I supposed about a symbolic link is needed,
and
> I create it (the vm-display-X11.so above is my symlink), but still
don't
> working. > > Someone could give me some advice? > > Cheers.
Hi Giuseppe,
this is a guess but I had a similar situation with a plugin I was working on and in my case it turned out to be an unresolved reference due to a typo. Have you changed vm-display-X11 at all?
Giuseppe Luigi Punzi wrote:
Hi again,
Sorry, for the delay, but my OpenSuse box is at work, and I didn't have time to check this.
I didn't tried this option yet. Some minutes ago, tried specifying the plugins directory, and worked: squeak -plugins /usr/lib/squeak/3.10-3/
And squeak -h gives me this output: glpunzi@info01:~/desarrollo/squeak.3.10> squeak -help Usage: squeak [<option>...] [<imageName> [<argument>...]] squeak [<option>...] -- [<argument>...] . . [The diferent options] . .
Notes: <imageName> defaults to `squeak.image'. -vtlock disables keyboard vt switching even when -vtswitch is enabled If `-memory' is not specified then the heap will grow dynamically. <argument>s are ignored, but are processed by the Squeak image. The first <argument> normally names a Squeak `script' to execute. Precede <arguments> by `--' to use default image.
Available drivers: vm-sound-null vm-sound-ALSA vm-sound-OSS vm-display-null vm-display-fbdev
Seems, for some reason, don't find vm-display-X11 by default.
On mar, 2009-05-19 at 12:56 +0200, Bruce O'Neel wrote:
Hi,
Keep in mind that I do not use OpenSUSE so this might be completely wrong.
If you figure out which rpm you got /usr/lib64/libGL.so.1 from, you need to install that same RPM but the i568 one rather than x86_64 one.
Guessing, ie, proceed at your own risk, I think that Mesa-7.4.2-1.3.i586.rpm would do it.
It looks like you can get it from http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_11.1/i586/
cheers
bruce
On Mon, May 18, 2009 at 10:07:24PM +0200, Bruce O'Neel wrote:
Hi,
As Bert recommended, the VM built without GL support might be the way to go.
The other choice is to figure out what SuSE calls the 32 bit version of Mesa, and install that.
You can't call a 64 bit library from 32 bit code. Well, that's not 100% true, but, let's just leave it there rather than add paragraphs which won't really solve the problem anyway.
cheers
bruce
On Mon, May 18, 2009 at 06:19:04PM +0200, Giuseppe Luigi Punzi wrote:
Don't works :(
El Monday 18 May 2009 17:42:38 Mariano Martinez Peck escribió:
On Mon, May 18, 2009 at 2:38 PM, Giuseppe Luigi Punzi <
glpunzi@lordzealon.com> wrote:
Hi, thanks in advance for your answer.
The output is: glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 linux-gate.so.1 => (0xffffe000) libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) libGL.so.1 => not found libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) libm.so.6 => /lib/libm.so.6 (0xf7f06000) libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) libc.so.6 => /lib/libc.so.6 (0xf7c5e000) libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) /lib/ld-linux.so.2 (0xf7fab000) libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000)
Could be libGL the problem?
libGL.so.1 is provided by Mesa package, but is installed. It puts the file on /usr/lib64
what about doing an ln to /usr/lib ? just to see if works
El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió: > Hi, > > Try a > > ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so > > or > > ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 > > and look at what libraries vm-disply-X11 wants. That might point > you in some direction. > > cheers > > bruce > > On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote: >> Hi all, >> >> Recently I installed OpenSuse 11.1 in my work machine, and I'm trying to
>> get Squeak working. >> >> I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from >> http://www.squeakvm.org/unix/ >> >> I tried to launch ./INSTALL but it told me: >> "Your architecture appears to be: x86_64-linux-gnu. >> >> No binaries/libraries found for x86_64-linux-gnu. >> You might have tell INSTALL whch cpu-vendor-os to use." >> >> To avoid to build a VM, I forced with >> ./INSTALL i686-pc-linux-gnu/ >> >> it installed, but, when I tried to start it, I get: >> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak >> Squeak3.10.2-7179-basic.image could not find display driver >> vm-display-X11; either: >> - check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists, or
>> - use the '-plugins <path>' option to tell me where it is, or >> - remove DISPLAY from your environment. >> Abortado >> >> My vm-display.X11 looks like: >> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls >> /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin >> ImmX11Plugin MIDIPlugin OggPlugin squeak >> UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do >> vm-sound-NAS XDisplayControlPlugin >> B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin >> PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null >> vm- display-X11.so vm-sound-null >> ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so >> RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 >> vm- sound-ALSA vm-sound-OSS >> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> >> >> I had vm-display-X11 and I supposed about a symbolic link is needed, and
>> I create it (the vm-display-X11.so above is my symlink), but still don't
>> working. >> >> Someone could give me some advice? >> >> Cheers.
Hi derek, I didn't changed nothing.
Was a clean install: http://www.nabble.com/-squeak-dev--Squeak-and-Linux-OpenSuse-11.1-td23597336...
El lun, 25-05-2009 a las 13:11 +0100, Derek O'Connell escribió:
Hi Giuseppe,
this is a guess but I had a similar situation with a plugin I was working on and in my case it turned out to be an unresolved reference due to a typo. Have you changed vm-display-X11 at all?
Giuseppe Luigi Punzi wrote:
Hi again,
Sorry, for the delay, but my OpenSuse box is at work, and I didn't have time to check this.
I didn't tried this option yet. Some minutes ago, tried specifying the plugins directory, and worked: squeak -plugins /usr/lib/squeak/3.10-3/
And squeak -h gives me this output: glpunzi@info01:~/desarrollo/squeak.3.10> squeak -help Usage: squeak [<option>...] [<imageName> [<argument>...]] squeak [<option>...] -- [<argument>...] . . [The diferent options] . .
Notes: <imageName> defaults to `squeak.image'. -vtlock disables keyboard vt switching even when -vtswitch is enabled If `-memory' is not specified then the heap will grow dynamically. <argument>s are ignored, but are processed by the Squeak image. The first <argument> normally names a Squeak `script' to execute. Precede <arguments> by `--' to use default image.
Available drivers: vm-sound-null vm-sound-ALSA vm-sound-OSS vm-display-null vm-display-fbdev
Seems, for some reason, don't find vm-display-X11 by default.
On mar, 2009-05-19 at 12:56 +0200, Bruce O'Neel wrote:
Hi,
Keep in mind that I do not use OpenSUSE so this might be completely wrong.
If you figure out which rpm you got /usr/lib64/libGL.so.1 from, you need to install that same RPM but the i568 one rather than x86_64 one.
Guessing, ie, proceed at your own risk, I think that Mesa-7.4.2-1.3.i586.rpm would do it.
It looks like you can get it from http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_11.1/i586/
cheers
bruce
On Mon, May 18, 2009 at 10:07:24PM +0200, Bruce O'Neel wrote:
Hi,
As Bert recommended, the VM built without GL support might be the way to go.
The other choice is to figure out what SuSE calls the 32 bit version of Mesa, and install that.
You can't call a 64 bit library from 32 bit code. Well, that's not 100% true, but, let's just leave it there rather than add paragraphs which won't really solve the problem anyway.
cheers
bruce
On Mon, May 18, 2009 at 06:19:04PM +0200, Giuseppe Luigi Punzi wrote:
Don't works :(
El Monday 18 May 2009 17:42:38 Mariano Martinez Peck escribió:
On Mon, May 18, 2009 at 2:38 PM, Giuseppe Luigi Punzi <
glpunzi@lordzealon.com> wrote: > Hi, thanks in advance for your answer. > > The output is: > glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd > /usr/local/lib/squeak/3.10-4/vm-display-X11 > linux-gate.so.1 => (0xffffe000) > libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) > libGL.so.1 => not found > libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) > libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) > libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) > libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) > libm.so.6 => /lib/libm.so.6 (0xf7f06000) > libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) > libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) > libc.so.6 => /lib/libc.so.6 (0xf7c5e000) > libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) > libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) > /lib/ld-linux.so.2 (0xf7fab000) > libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) > libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000) > > Could be libGL the problem? > > libGL.so.1 is provided by Mesa package, but is installed. It puts the > file on > /usr/lib64 what about doing an ln to /usr/lib ? just to see if works
> El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió: >> Hi, >> >> Try a >> >> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so >> >> or >> >> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 >> >> and look at what libraries vm-disply-X11 wants. That might point >> you in some direction. >> >> cheers >> >> bruce >> >> On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote: >>> Hi all, >>> >>> Recently I installed OpenSuse 11.1 in my work machine, and I'm trying > to > >>> get Squeak working. >>> >>> I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from >>> http://www.squeakvm.org/unix/ >>> >>> I tried to launch ./INSTALL but it told me: >>> "Your architecture appears to be: x86_64-linux-gnu. >>> >>> No binaries/libraries found for x86_64-linux-gnu. >>> You might have tell INSTALL whch cpu-vendor-os to use." >>> >>> To avoid to build a VM, I forced with >>> ./INSTALL i686-pc-linux-gnu/ >>> >>> it installed, but, when I tried to start it, I get: >>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak >>> Squeak3.10.2-7179-basic.image could not find display driver >>> vm-display-X11; either: >>> - check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists, > or > >>> - use the '-plugins <path>' option to tell me where it is, or >>> - remove DISPLAY from your environment. >>> Abortado >>> >>> My vm-display.X11 looks like: >>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls >>> /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin >>> ImmX11Plugin MIDIPlugin OggPlugin squeak >>> UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do >>> vm-sound-NAS XDisplayControlPlugin >>> B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin >>> PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null >>> vm- display-X11.so vm-sound-null >>> ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so >>> RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 >>> vm- sound-ALSA vm-sound-OSS >>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> >>> >>> I had vm-display-X11 and I supposed about a symbolic link is needed, > and > >>> I create it (the vm-display-X11.so above is my symlink), but still > don't > >>> working. >>> >>> Someone could give me some advice? >>> >>> Cheers.
Well then my next guess is that vm-display-X11 is making a call to a missing function. I can't check anything atm but maybe there is a debug option when compiling the VM that would display the failure. Alternatively if you have "strace" installed then use that and look at the output for failures. I typically use the following...
"strace -s 64 -o strace-results.txt <usual squeak stuff>"
...and then load up the results in an editor and start searching.
HTH
Giuseppe Luigi Punzi wrote:
Hi derek, I didn't changed nothing.
Was a clean install: http://www.nabble.com/-squeak-dev--Squeak-and-Linux-OpenSuse-11.1-td23597336...
El lun, 25-05-2009 a las 13:11 +0100, Derek O'Connell escribió:
Hi Giuseppe,
this is a guess but I had a similar situation with a plugin I was working on and in my case it turned out to be an unresolved reference due to a typo. Have you changed vm-display-X11 at all?
Giuseppe Luigi Punzi wrote:
Hi again,
Sorry, for the delay, but my OpenSuse box is at work, and I didn't have time to check this.
I didn't tried this option yet. Some minutes ago, tried specifying the plugins directory, and worked: squeak -plugins /usr/lib/squeak/3.10-3/
And squeak -h gives me this output: glpunzi@info01:~/desarrollo/squeak.3.10> squeak -help Usage: squeak [<option>...] [<imageName> [<argument>...]] squeak [<option>...] -- [<argument>...] . . [The diferent options] . .
Notes: <imageName> defaults to `squeak.image'. -vtlock disables keyboard vt switching even when -vtswitch is enabled If `-memory' is not specified then the heap will grow dynamically. <argument>s are ignored, but are processed by the Squeak image. The first <argument> normally names a Squeak `script' to execute. Precede <arguments> by `--' to use default image.
Available drivers: vm-sound-null vm-sound-ALSA vm-sound-OSS vm-display-null vm-display-fbdev
Seems, for some reason, don't find vm-display-X11 by default.
On mar, 2009-05-19 at 12:56 +0200, Bruce O'Neel wrote:
Hi,
Keep in mind that I do not use OpenSUSE so this might be completely wrong.
If you figure out which rpm you got /usr/lib64/libGL.so.1 from, you need to install that same RPM but the i568 one rather than x86_64 one.
Guessing, ie, proceed at your own risk, I think that Mesa-7.4.2-1.3.i586.rpm would do it.
It looks like you can get it from http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_11.1/i586/
cheers
bruce
On Mon, May 18, 2009 at 10:07:24PM +0200, Bruce O'Neel wrote:
Hi,
As Bert recommended, the VM built without GL support might be the way to go.
The other choice is to figure out what SuSE calls the 32 bit version of Mesa, and install that.
You can't call a 64 bit library from 32 bit code. Well, that's not 100% true, but, let's just leave it there rather than add paragraphs which won't really solve the problem anyway.
cheers
bruce
On Mon, May 18, 2009 at 06:19:04PM +0200, Giuseppe Luigi Punzi wrote:
Don't works :(
El Monday 18 May 2009 17:42:38 Mariano Martinez Peck escribió: > On Mon, May 18, 2009 at 2:38 PM, Giuseppe Luigi Punzi < > > glpunzi@lordzealon.com> wrote: >> Hi, thanks in advance for your answer. >> >> The output is: >> glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd >> /usr/local/lib/squeak/3.10-4/vm-display-X11 >> linux-gate.so.1 => (0xffffe000) >> libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) >> libGL.so.1 => not found >> libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) >> libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) >> libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) >> libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) >> libm.so.6 => /lib/libm.so.6 (0xf7f06000) >> libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) >> libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) >> libc.so.6 => /lib/libc.so.6 (0xf7c5e000) >> libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) >> libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) >> /lib/ld-linux.so.2 (0xf7fab000) >> libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) >> libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000) >> >> Could be libGL the problem? >> >> libGL.so.1 is provided by Mesa package, but is installed. It puts the >> file on >> /usr/lib64 > what about doing an ln to /usr/lib ? just to see if works > >> El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió: >>> Hi, >>> >>> Try a >>> >>> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so >>> >>> or >>> >>> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 >>> >>> and look at what libraries vm-disply-X11 wants. That might point >>> you in some direction. >>> >>> cheers >>> >>> bruce >>> >>> On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote: >>>> Hi all, >>>> >>>> Recently I installed OpenSuse 11.1 in my work machine, and I'm trying >> to >> >>>> get Squeak working. >>>> >>>> I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from >>>> http://www.squeakvm.org/unix/ >>>> >>>> I tried to launch ./INSTALL but it told me: >>>> "Your architecture appears to be: x86_64-linux-gnu. >>>> >>>> No binaries/libraries found for x86_64-linux-gnu. >>>> You might have tell INSTALL whch cpu-vendor-os to use." >>>> >>>> To avoid to build a VM, I forced with >>>> ./INSTALL i686-pc-linux-gnu/ >>>> >>>> it installed, but, when I tried to start it, I get: >>>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak >>>> Squeak3.10.2-7179-basic.image could not find display driver >>>> vm-display-X11; either: >>>> - check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists, >> or >> >>>> - use the '-plugins <path>' option to tell me where it is, or >>>> - remove DISPLAY from your environment. >>>> Abortado >>>> >>>> My vm-display.X11 looks like: >>>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls >>>> /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin >>>> ImmX11Plugin MIDIPlugin OggPlugin squeak >>>> UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do >>>> vm-sound-NAS XDisplayControlPlugin >>>> B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin >>>> PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null >>>> vm- display-X11.so vm-sound-null >>>> ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so >>>> RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 >>>> vm- sound-ALSA vm-sound-OSS >>>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> >>>> >>>> I had vm-display-X11 and I supposed about a symbolic link is needed, >> and >> >>>> I create it (the vm-display-X11.so above is my symlink), but still >> don't >> >>>> working. >>>> >>>> Someone could give me some advice? >>>> >>>> Cheers.
Ok, I think I know what is the problem, but I don't know how to solve.
When try to run squeak, I get: - check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists, or
Investigating, seems that I have 2 libs directories for squeak. "/usr/local/lib/squeak/3.10-4" and "/usr/lib/squeak/3.10-3".
Squeak by default, is searching on "/usr/local/lib/squeak/3.10-4" and trying to running with -plugins /usr/local/lib/squeak/3.10-4 doesn't works.
But, if I do -plugins /usr/lib/squeak/3.10-3 it works. This directory comes from the OLPC VM.
Here are the 2 directories: OLPC glpunzi@info01:~> ls /usr/lib/squeak/3.10-3/ AioPlugin GStreamerPlugin KedamaPlugin2 OggPlugin Squeak3D vm-display-fbdev vm-sound-ALSA ClipboardExtendedPlugin ImmX11Plugin MIDIPlugin RomePlugin UUIDPlugin vm-display-null vm-sound-null DBusPlugin KedamaPlugin npsqueak.so squeak VideoForLinuxPlugin vm-display-X11 vm-sound-OSS
Squeak tar.gz glpunzi@info01:~> ls /usr/local/lib/squeak/3.10-4/ AioPlugin FileCopyPlugin KedamaPlugin2 OggPlugin Squeak3D VideoForLinuxPlugin vm-sound-ALSA XDisplayControlPlugin B3DAcceleratorPlugin GStreamerPlugin MIDIPlugin PseudoTTYPlugin SqueakFFIPrims vm-display-fbdev vm-sound-NAS ClipboardExtendedPlugin ImmX11Plugin Mpeg3Plugin RomePlugin UnixOSProcessPlugin vm-display-null vm-sound-null DBusPlugin KedamaPlugin npsqueak.so squeak UUIDPlugin vm-display-X11 vm-sound-OSS
El lun, 25-05-2009 a las 14:31 +0100, Derek O'Connell escribió:
Well then my next guess is that vm-display-X11 is making a call to a missing function. I can't check anything atm but maybe there is a debug option when compiling the VM that would display the failure. Alternatively if you have "strace" installed then use that and look at the output for failures. I typically use the following...
"strace -s 64 -o strace-results.txt <usual squeak stuff>"
...and then load up the results in an editor and start searching.
HTH
Giuseppe Luigi Punzi wrote:
Hi derek, I didn't changed nothing.
Was a clean install: http://www.nabble.com/-squeak-dev--Squeak-and-Linux-OpenSuse-11.1-td23597336...
El lun, 25-05-2009 a las 13:11 +0100, Derek O'Connell escribió:
Hi Giuseppe,
this is a guess but I had a similar situation with a plugin I was working on and in my case it turned out to be an unresolved reference due to a typo. Have you changed vm-display-X11 at all?
Giuseppe Luigi Punzi wrote:
Hi again,
Sorry, for the delay, but my OpenSuse box is at work, and I didn't have time to check this.
I didn't tried this option yet. Some minutes ago, tried specifying the plugins directory, and worked: squeak -plugins /usr/lib/squeak/3.10-3/
And squeak -h gives me this output: glpunzi@info01:~/desarrollo/squeak.3.10> squeak -help Usage: squeak [<option>...] [<imageName> [<argument>...]] squeak [<option>...] -- [<argument>...] . . [The diferent options] . .
Notes: <imageName> defaults to `squeak.image'. -vtlock disables keyboard vt switching even when -vtswitch is enabled If `-memory' is not specified then the heap will grow dynamically. <argument>s are ignored, but are processed by the Squeak image. The first <argument> normally names a Squeak `script' to execute. Precede <arguments> by `--' to use default image.
Available drivers: vm-sound-null vm-sound-ALSA vm-sound-OSS vm-display-null vm-display-fbdev
Seems, for some reason, don't find vm-display-X11 by default.
On mar, 2009-05-19 at 12:56 +0200, Bruce O'Neel wrote:
Hi,
Keep in mind that I do not use OpenSUSE so this might be completely wrong.
If you figure out which rpm you got /usr/lib64/libGL.so.1 from, you need to install that same RPM but the i568 one rather than x86_64 one.
Guessing, ie, proceed at your own risk, I think that Mesa-7.4.2-1.3.i586.rpm would do it.
It looks like you can get it from http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_11.1/i586/
cheers
bruce
On Mon, May 18, 2009 at 10:07:24PM +0200, Bruce O'Neel wrote:
Hi,
As Bert recommended, the VM built without GL support might be the way to go.
The other choice is to figure out what SuSE calls the 32 bit version of Mesa, and install that.
You can't call a 64 bit library from 32 bit code. Well, that's not 100% true, but, let's just leave it there rather than add paragraphs which won't really solve the problem anyway.
cheers
bruce
On Mon, May 18, 2009 at 06:19:04PM +0200, Giuseppe Luigi Punzi wrote: > Don't works :( > > El Monday 18 May 2009 17:42:38 Mariano Martinez Peck escribió: >> On Mon, May 18, 2009 at 2:38 PM, Giuseppe Luigi Punzi < >> >> glpunzi@lordzealon.com> wrote: >>> Hi, thanks in advance for your answer. >>> >>> The output is: >>> glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd >>> /usr/local/lib/squeak/3.10-4/vm-display-X11 >>> linux-gate.so.1 => (0xffffe000) >>> libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) >>> libGL.so.1 => not found >>> libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) >>> libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) >>> libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) >>> libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) >>> libm.so.6 => /lib/libm.so.6 (0xf7f06000) >>> libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) >>> libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) >>> libc.so.6 => /lib/libc.so.6 (0xf7c5e000) >>> libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) >>> libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) >>> /lib/ld-linux.so.2 (0xf7fab000) >>> libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) >>> libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000) >>> >>> Could be libGL the problem? >>> >>> libGL.so.1 is provided by Mesa package, but is installed. It puts the >>> file on >>> /usr/lib64 >> what about doing an ln to /usr/lib ? just to see if works >> >>> El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió: >>>> Hi, >>>> >>>> Try a >>>> >>>> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so >>>> >>>> or >>>> >>>> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 >>>> >>>> and look at what libraries vm-disply-X11 wants. That might point >>>> you in some direction. >>>> >>>> cheers >>>> >>>> bruce >>>> >>>> On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote: >>>>> Hi all, >>>>> >>>>> Recently I installed OpenSuse 11.1 in my work machine, and I'm trying >>> to >>> >>>>> get Squeak working. >>>>> >>>>> I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from >>>>> http://www.squeakvm.org/unix/ >>>>> >>>>> I tried to launch ./INSTALL but it told me: >>>>> "Your architecture appears to be: x86_64-linux-gnu. >>>>> >>>>> No binaries/libraries found for x86_64-linux-gnu. >>>>> You might have tell INSTALL whch cpu-vendor-os to use." >>>>> >>>>> To avoid to build a VM, I forced with >>>>> ./INSTALL i686-pc-linux-gnu/ >>>>> >>>>> it installed, but, when I tried to start it, I get: >>>>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak >>>>> Squeak3.10.2-7179-basic.image could not find display driver >>>>> vm-display-X11; either: >>>>> - check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists, >>> or >>> >>>>> - use the '-plugins <path>' option to tell me where it is, or >>>>> - remove DISPLAY from your environment. >>>>> Abortado >>>>> >>>>> My vm-display.X11 looks like: >>>>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls >>>>> /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin >>>>> ImmX11Plugin MIDIPlugin OggPlugin squeak >>>>> UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do >>>>> vm-sound-NAS XDisplayControlPlugin >>>>> B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin >>>>> PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null >>>>> vm- display-X11.so vm-sound-null >>>>> ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so >>>>> RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 >>>>> vm- sound-ALSA vm-sound-OSS >>>>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> >>>>> >>>>> I had vm-display-X11 and I supposed about a symbolic link is needed, >>> and >>> >>>>> I create it (the vm-display-X11.so above is my symlink), but still >>> don't >>> >>>>> working. >>>>> >>>>> Someone could give me some advice? >>>>> >>>>> Cheers.
Attached is the output of strace
El lun, 25-05-2009 a las 16:01 +0200, Giuseppe Luigi Punzi escribió:
Ok, I think I know what is the problem, but I don't know how to solve.
When try to run squeak, I get:
- check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists, or
Investigating, seems that I have 2 libs directories for squeak. "/usr/local/lib/squeak/3.10-4" and "/usr/lib/squeak/3.10-3".
Squeak by default, is searching on "/usr/local/lib/squeak/3.10-4" and trying to running with -plugins /usr/local/lib/squeak/3.10-4 doesn't works.
But, if I do -plugins /usr/lib/squeak/3.10-3 it works. This directory comes from the OLPC VM.
Here are the 2 directories: OLPC glpunzi@info01:~> ls /usr/lib/squeak/3.10-3/ AioPlugin GStreamerPlugin KedamaPlugin2 OggPlugin Squeak3D vm-display-fbdev vm-sound-ALSA ClipboardExtendedPlugin ImmX11Plugin MIDIPlugin RomePlugin UUIDPlugin vm-display-null vm-sound-null DBusPlugin KedamaPlugin npsqueak.so squeak VideoForLinuxPlugin vm-display-X11 vm-sound-OSS
Squeak tar.gz glpunzi@info01:~> ls /usr/local/lib/squeak/3.10-4/ AioPlugin FileCopyPlugin KedamaPlugin2 OggPlugin Squeak3D VideoForLinuxPlugin vm-sound-ALSA XDisplayControlPlugin B3DAcceleratorPlugin GStreamerPlugin MIDIPlugin PseudoTTYPlugin SqueakFFIPrims vm-display-fbdev vm-sound-NAS ClipboardExtendedPlugin ImmX11Plugin Mpeg3Plugin RomePlugin UnixOSProcessPlugin vm-display-null vm-sound-null DBusPlugin KedamaPlugin npsqueak.so squeak UUIDPlugin vm-display-X11 vm-sound-OSS
El lun, 25-05-2009 a las 14:31 +0100, Derek O'Connell escribió:
Well then my next guess is that vm-display-X11 is making a call to a missing function. I can't check anything atm but maybe there is a debug option when compiling the VM that would display the failure. Alternatively if you have "strace" installed then use that and look at the output for failures. I typically use the following...
"strace -s 64 -o strace-results.txt <usual squeak stuff>"
...and then load up the results in an editor and start searching.
HTH
Giuseppe Luigi Punzi wrote:
Hi derek, I didn't changed nothing.
Was a clean install: http://www.nabble.com/-squeak-dev--Squeak-and-Linux-OpenSuse-11.1-td23597336...
El lun, 25-05-2009 a las 13:11 +0100, Derek O'Connell escribió:
Hi Giuseppe,
this is a guess but I had a similar situation with a plugin I was working on and in my case it turned out to be an unresolved reference due to a typo. Have you changed vm-display-X11 at all?
Giuseppe Luigi Punzi wrote:
Hi again,
Sorry, for the delay, but my OpenSuse box is at work, and I didn't have time to check this.
I didn't tried this option yet. Some minutes ago, tried specifying the plugins directory, and worked: squeak -plugins /usr/lib/squeak/3.10-3/
And squeak -h gives me this output: glpunzi@info01:~/desarrollo/squeak.3.10> squeak -help Usage: squeak [<option>...] [<imageName> [<argument>...]] squeak [<option>...] -- [<argument>...] . . [The diferent options] . .
Notes: <imageName> defaults to `squeak.image'. -vtlock disables keyboard vt switching even when -vtswitch is enabled If `-memory' is not specified then the heap will grow dynamically. <argument>s are ignored, but are processed by the Squeak image. The first <argument> normally names a Squeak `script' to execute. Precede <arguments> by `--' to use default image.
Available drivers: vm-sound-null vm-sound-ALSA vm-sound-OSS vm-display-null vm-display-fbdev
Seems, for some reason, don't find vm-display-X11 by default.
On mar, 2009-05-19 at 12:56 +0200, Bruce O'Neel wrote:
Hi,
Keep in mind that I do not use OpenSUSE so this might be completely wrong.
If you figure out which rpm you got /usr/lib64/libGL.so.1 from, you need to install that same RPM but the i568 one rather than x86_64 one.
Guessing, ie, proceed at your own risk, I think that Mesa-7.4.2-1.3.i586.rpm would do it.
It looks like you can get it from http://download.opensuse.org/repositories/X11:/XOrg/openSUSE_11.1/i586/
cheers
bruce
On Mon, May 18, 2009 at 10:07:24PM +0200, Bruce O'Neel wrote: > Hi, > > As Bert recommended, the VM built without GL support might be the way to go. > > The other choice is to figure out what SuSE calls the 32 bit version of Mesa, > and install that. > > You can't call a 64 bit library from 32 bit code. Well, that's > not 100% true, but, let's just leave it there rather than add paragraphs which > won't really solve the problem anyway. > > cheers > > bruce > > > On Mon, May 18, 2009 at 06:19:04PM +0200, Giuseppe Luigi Punzi wrote: >> Don't works :( >> >> El Monday 18 May 2009 17:42:38 Mariano Martinez Peck escribió: >>> On Mon, May 18, 2009 at 2:38 PM, Giuseppe Luigi Punzi < >>> >>> glpunzi@lordzealon.com> wrote: >>>> Hi, thanks in advance for your answer. >>>> >>>> The output is: >>>> glpunzi@dhcppc2:~/descargas/Squeak-3.10-4/platforms/unix/src/vm> ldd >>>> /usr/local/lib/squeak/3.10-4/vm-display-X11 >>>> linux-gate.so.1 => (0xffffe000) >>>> libXrender.so.1 => /usr/lib/libXrender.so.1 (0xf7f6a000) >>>> libGL.so.1 => not found >>>> libXext.so.6 => /usr/lib/libXext.so.6 (0xf7f59000) >>>> libSM.so.6 => /usr/lib/libSM.so.6 (0xf7f50000) >>>> libICE.so.6 => /usr/lib/libICE.so.6 (0xf7f34000) >>>> libdl.so.2 => /lib/libdl.so.2 (0xf7f2f000) >>>> libm.so.6 => /lib/libm.so.6 (0xf7f06000) >>>> libnsl.so.1 => /lib/libnsl.so.1 (0xf7eed000) >>>> libX11.so.6 => /usr/lib/libX11.so.6 (0xf7dba000) >>>> libc.so.6 => /lib/libc.so.6 (0xf7c5e000) >>>> libXau.so.6 => /usr/lib/libXau.so.6 (0xf7c59000) >>>> libuuid.so.1 => /lib/libuuid.so.1 (0xf7c53000) >>>> /lib/ld-linux.so.2 (0xf7fab000) >>>> libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0xf7c50000) >>>> libxcb.so.1 => /usr/lib/libxcb.so.1 (0xf7c32000) >>>> >>>> Could be libGL the problem? >>>> >>>> libGL.so.1 is provided by Mesa package, but is installed. It puts the >>>> file on >>>> /usr/lib64 >>> what about doing an ln to /usr/lib ? just to see if works >>> >>>> El Monday 18 May 2009 17:27:02 Bruce O'Neel escribió: >>>>> Hi, >>>>> >>>>> Try a >>>>> >>>>> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11.so >>>>> >>>>> or >>>>> >>>>> ldd /usr/local/lib/squeak/3.10-4/vm-display-X11 >>>>> >>>>> and look at what libraries vm-disply-X11 wants. That might point >>>>> you in some direction. >>>>> >>>>> cheers >>>>> >>>>> bruce >>>>> >>>>> On Mon, May 18, 2009 at 03:20:45PM +0200, Giuseppe Luigi Punzi wrote: >>>>>> Hi all, >>>>>> >>>>>> Recently I installed OpenSuse 11.1 in my work machine, and I'm trying >>>> to >>>> >>>>>> get Squeak working. >>>>>> >>>>>> I downloaded Squeak-3.10-4.i686-pc-linux-gnu.tar.gz from >>>>>> http://www.squeakvm.org/unix/ >>>>>> >>>>>> I tried to launch ./INSTALL but it told me: >>>>>> "Your architecture appears to be: x86_64-linux-gnu. >>>>>> >>>>>> No binaries/libraries found for x86_64-linux-gnu. >>>>>> You might have tell INSTALL whch cpu-vendor-os to use." >>>>>> >>>>>> To avoid to build a VM, I forced with >>>>>> ./INSTALL i686-pc-linux-gnu/ >>>>>> >>>>>> it installed, but, when I tried to start it, I get: >>>>>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> squeak >>>>>> Squeak3.10.2-7179-basic.image could not find display driver >>>>>> vm-display-X11; either: >>>>>> - check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists, >>>> or >>>> >>>>>> - use the '-plugins <path>' option to tell me where it is, or >>>>>> - remove DISPLAY from your environment. >>>>>> Abortado >>>>>> >>>>>> My vm-display.X11 looks like: >>>>>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> ls >>>>>> /usr/local/lib/squeak/3.10-4/ AioPlugin DBusPlugin >>>>>> ImmX11Plugin MIDIPlugin OggPlugin squeak >>>>>> UnixOSProcessPlugin vm-display-fbdev vm- display-X11.do >>>>>> vm-sound-NAS XDisplayControlPlugin >>>>>> B3DAcceleratorPlugin FileCopyPlugin KedamaPlugin Mpeg3Plugin >>>>>> PseudoTTYPlugin Squeak3D UUIDPlugin vm-display-null >>>>>> vm- display-X11.so vm-sound-null >>>>>> ClipboardExtendedPlugin GStreamerPlugin KedamaPlugin2 npsqueak.so >>>>>> RomePlugin SqueakFFIPrims VideoForLinuxPlugin vm-display-X11 >>>>>> vm- sound-ALSA vm-sound-OSS >>>>>> glpunzi@dhcppc2:~/desarrollo/squeak.3.10> >>>>>> >>>>>> I had vm-display-X11 and I supposed about a symbolic link is needed, >>>> and >>>> >>>>>> I create it (the vm-display-X11.so above is my symlink), but still >>>> don't >>>> >>>>>> working. >>>>>> >>>>>> Someone could give me some advice? >>>>>> >>>>>> Cheers.
On Monday 25 May 2009 07:31:55 pm Giuseppe Luigi Punzi wrote:
Investigating, seems that I have 2 libs directories for squeak. "/usr/local/lib/squeak/3.10-4" and "/usr/lib/squeak/3.10-3".
Squeak by default, is searching on "/usr/local/lib/squeak/3.10-4" and trying to running with -plugins /usr/local/lib/squeak/3.10-4 doesn't works.
But, if I do -plugins /usr/lib/squeak/3.10-3 it works. This directory comes from the OLPC VM.
/usr/bin/squeak is usually a symlink. In your case, I suspect it is linked to the 3.10-3/ path while the search order could have 3.10-4 before this path. To fix a) Remove the unneeded version. b) If you need both, create launcher scripts with the right PATH and SQUEAK_PLUGIN env variables or use explicit path, e.g /usr/lib/squeak/3.10-3/squeak -plugins /usr/lib/squeak/3.10-3 Check if your squeak binaries support SQUEAK_PLUGINS env variable $ strings `which squeak` | grep SQUEAK_
HTH .. Subbu
Well, I don't need both.
I installed OLPC for the problems, and I uninstalled.
Now, I can't run squeak hehehe
If I do "squeak" or "squeak -plugins /usr/local/lib/squeak/3.10-4" I get always: could not find display driver vm-display-X11; either: - check that /usr/local/lib/squeak/3.10-4/vm-display-X11.so exists, or - use the '-plugins <path>' option to tell me where it is, or - remove DISPLAY from your environment.
Must be something on OLPC rpm, thath is not in tar.gz from squeakvm.org
El lun, 25-05-2009 a las 19:59 +0530, K. K. Subramaniam escribió:
On Monday 25 May 2009 07:31:55 pm Giuseppe Luigi Punzi wrote:
Investigating, seems that I have 2 libs directories for squeak. "/usr/local/lib/squeak/3.10-4" and "/usr/lib/squeak/3.10-3".
Squeak by default, is searching on "/usr/local/lib/squeak/3.10-4" and trying to running with -plugins /usr/local/lib/squeak/3.10-4 doesn't works.
But, if I do -plugins /usr/lib/squeak/3.10-3 it works. This directory comes from the OLPC VM.
/usr/bin/squeak is usually a symlink. In your case, I suspect it is linked to the 3.10-3/ path while the search order could have 3.10-4 before this path. To fix a) Remove the unneeded version. b) If you need both, create launcher scripts with the right PATH and SQUEAK_PLUGIN env variables or use explicit path, e.g /usr/lib/squeak/3.10-3/squeak -plugins /usr/lib/squeak/3.10-3 Check if your squeak binaries support SQUEAK_PLUGINS env variable $ strings `which squeak` | grep SQUEAK_
HTH .. Subbu
On Monday 25 May 2009 08:15:16 pm Giuseppe Luigi Punzi wrote:
Well, I don't need both.
I installed OLPC for the problems, and I uninstalled.
Now, I can't run squeak hehehe
The default compile of squeak uses /usr/local/lib/squeak while Debian-based builds use the /usr/lib/squeak/ prefix. It is likely that when you uninstalled OLPC version, the symlink in /usr/bin/squeak did not get restored to the old path. If you need only the 3.10-4 version, ensure: $ ls -l `which squeak` ...... /usr/bin/squeak -> /usr/local/lib/squeak/3.10-4/squeak
HTH .. Subbu
El lun, 25-05-2009 a las 19:59 +0530, K. K. Subramaniam escribió:
On Monday 25 May 2009 07:31:55 pm Giuseppe Luigi Punzi wrote:
Investigating, seems that I have 2 libs directories for squeak. "/usr/local/lib/squeak/3.10-4" and "/usr/lib/squeak/3.10-3".
Squeak by default, is searching on "/usr/local/lib/squeak/3.10-4" and trying to running with -plugins /usr/local/lib/squeak/3.10-4 doesn't works.
But, if I do -plugins /usr/lib/squeak/3.10-3 it works. This directory comes from the OLPC VM.
/usr/bin/squeak is usually a symlink. In your case, I suspect it is linked to the 3.10-3/ path while the search order could have 3.10-4 before this path. To fix a) Remove the unneeded version. b) If you need both, create launcher scripts with the right PATH and SQUEAK_PLUGIN env variables or use explicit path, e.g /usr/lib/squeak/3.10-3/squeak -plugins /usr/lib/squeak/3.10-3 Check if your squeak binaries support SQUEAK_PLUGINS env variable $ strings `which squeak` | grep SQUEAK_
HTH .. Subbu
I deleted all squeak related, installed "Developer Group", and builded from source. Now works "out of the box".
Now, Where is the normal place to put de SqueakV39.sources?
Cheers.
On Tuesday 26 May 2009 02:08:10 pm Giuseppe Luigi Punzi wrote:
I deleted all squeak related, installed "Developer Group", and builded from source. Now works "out of the box".
Now, Where is the normal place to put de SqueakV39.sources?
The search order is VM directory (e.g. /usr/lib/squeak/3.10-3/) Image directory DefaultDirectory (which is likely the same as 2 unless the SecurityManager has changed it).
You can find these in your image with the commands:
SmalltalkImage current vmPath SmalltalkImage current imagePath FileDirectory default
HTH .. Subbu
In the seaside mailing list they suggest the following for this error:
sudo apt-get install ia32-libs
On Tue, May 26, 2009 at 10:17 AM, K. K. Subramaniam subbukk@gmail.comwrote:
On Tuesday 26 May 2009 02:08:10 pm Giuseppe Luigi Punzi wrote:
I deleted all squeak related, installed "Developer Group", and builded from source. Now works "out of the box".
Now, Where is the normal place to put de SqueakV39.sources?
The search order is VM directory (e.g. /usr/lib/squeak/3.10-3/) Image directory DefaultDirectory (which is likely the same as 2 unless the SecurityManager has changed it).
You can find these in your image with the commands:
SmalltalkImage current vmPath SmalltalkImage current imagePath FileDirectory default
HTH .. Subbu
squeak-dev@lists.squeakfoundation.org