[SqNOS] Networking is comming to a theater close to you!
Johnathon Meichtry
johnathon-dev at meichtry.org
Tue Jul 11 14:22:04 UTC 2006
Hi Gera,
Excellent, I've downloaded 19 and will test it in the next hour or so and
let you know.
I have not actually been using Monticello, I've been downloading each file
from squeaksource and loading it manually for no other reason than wanting a
local copy in case I needed to revert quickly without net access.
Loading the 16,17,18 etc has worked fine although each time I have had to
"PCIBusEntry initializeVendorsAndDevicesMethod" to re-import the csv and
then initialize. Don't ask me why but it doesn't like the copy you imported
into the ZLibData. I know, we need to figure it out eventually or come up
with another method but for now its fine. BTW the ZLibData problem happens
in both Monticello and FileList/Load.
I'll have also been re-building the VM with each release and also had no
problems there.
Johnathon
----- Original Message -----
From: "Gerardo Richarte" <gera at corest.com>
To: <squeaknos at lists.squeakfoundation.org>
Sent: Tuesday, July 11, 2006 2:28 PM
Subject: Re: [SqNOS] Networking is comming to a theater close to you!
> Johnathon Meichtry wrote:
>> Hi Gera,
>>
>> *Fantastic and it takes only a brief look at the code to see how much
>> effort you have put into this so far!!!!*
> :-) thanks a lot! I can't wait the next free time slot I have to
> continue (and finish!). I quickly tested weather the IRQ support will
> work for this device, and in fact, I just turned a bit on, and IRQs
> started arriving correctly! :-)
>> I have loaded SqueakNOS-gera.18.mcz and there is a slight bug, refer
>> attached screen capture. The problem seems to be that
>> *LanceNICTransmitRingDescriptor16 *used to have method
>> *externalNewAligned* but it isn't there any more (it's a bit odd as
>> Squeak/Monticello is meant to stop this from happening).
> thanks a lot for reporting, it's fixed now. I have added those
> methods to classes in FFI, and for Monticello to include them you have
> to put them in a special cathegory (*SqueakNOS in our case). get
> .19.mcz, that should do the trick.
>
> from what you said, I assume you are successfully upgrading
> SqueakNOS from Monticello and rebooting with modifications, right?
> didn't you have problems with PCIDeviceEntry
> class>>vendorsAndDevicesZLibData when loading from Monticello?
>
> so, again, thanks for testing and reporting so fast!
> gera
>
> _______________________________________________
> SqueakNOS mailing list
> SqueakNOS at lists.squeakfoundation.org
> http://lists.squeakfoundation.org/mailman/listinfo/squeaknos
>
More information about the SqueakNOS
mailing list