I am please to announce the distribution of DrGeoII, an interactive geometry framework for Squeak, under the LGPL
http://www.squeaksource.com/DrGeoII.html
DrGeoII is roughly based on previous DrGeo (http://www.ofset.org/drgeo)
It is far to be finished, but it is already in a quite well polished and usable state.
Hilaire Fernandes
Very nice!
The only problem I found was the non working property editor. But maybe I did something wrong.
Would you think it feasible to develop DrGeo into a parametric (aka constrain based) sketcher? Its used in about every MCAD software but I have never seen an open source implementation.
Cheers, Torsten
Am Samstag, 24. Juni 2006 09:24 schrieb Hilaire Fernandes:
I am please to announce the distribution of DrGeoII, an interactive geometry framework for Squeak, under the LGPL
http://www.squeaksource.com/DrGeoII.html
DrGeoII is roughly based on previous DrGeo (http://www.ofset.org/drgeo)
It is far to be finished, but it is already in a quite well polished and usable state.
Hilaire Fernandes
Hello Torsten,
Torsten Sadowski a écrit :
Very nice!
The only problem I found was the non working property editor. But maybe I did something wrong.
A couple of features are not yet implemented
Would you think it feasible to develop DrGeo into a parametric (aka constrain based) sketcher? Its used in about every MCAD software but I have never seen
Really I am not sure.
Hilaire
How to run DrGeoII? I'm using Squeak 3.9
On 7/5/06, Hilaire Fernandes hilaire@ext.cri74.org wrote:
Hello Torsten,
Torsten Sadowski a écrit :
Very nice!
The only problem I found was the non working property editor. But maybe I did something wrong.
A couple of features are not yet implemented
Would you think it feasible to develop DrGeo into a parametric (aka constrain based) sketcher? Its used in about every MCAD software but I have never seen
Really I am not sure.
Hilaire
DrGApp new in a workspace.
Torsten
Am Mittwoch, 5. Juli 2006 19:03 schrieb Lethalman:
How to run DrGeoII? I'm using Squeak 3.9
On 7/5/06, Hilaire Fernandes hilaire@ext.cri74.org wrote:
Hello Torsten,
Torsten Sadowski a écrit :
Very nice!
The only problem I found was the non working property editor. But maybe I did something wrong.
A couple of features are not yet implemented
Would you think it feasible to develop DrGeo into a parametric (aka constrain based) sketcher? Its used in about every MCAD software but I have never seen
Really I am not sure.
Hilaire
I get an error, i'll tell you what's wrong in that when i run Squeak. Has it been tested with 3.9?
On 7/5/06, Torsten Sadowski torsten.sadowski@tu-berlin.de wrote:
DrGApp new in a workspace.
Torsten
Am Mittwoch, 5. Juli 2006 19:03 schrieb Lethalman:
How to run DrGeoII? I'm using Squeak 3.9
On 7/5/06, Hilaire Fernandes hilaire@ext.cri74.org wrote:
Hello Torsten,
Torsten Sadowski a écrit :
Very nice!
The only problem I found was the non working property editor. But maybe I did something wrong.
A couple of features are not yet implemented
Would you think it feasible to develop DrGeo into a parametric (aka constrain based) sketcher? Its used in about every MCAD software but I have never seen
Really I am not sure.
Hilaire
From: "Lethalman" lethalman88@gmail.com wrote:
I get an error, i'll tell you what's wrong in that when i run Squeak. Has it been tested with 3.9?
I experienced the same problem, but was able to run DrGeoII in a fresh Squeak 3.8. Seemingly in Squeak 3.9 two icons for the menu bar got lost (MenuIcons>>undoIcon, MenuIcons>>redoIcon)
Hope this helps Boris
Lethalman a écrit :
I get an error, i'll tell you what's wrong in that when i run Squeak. Has it been tested with 3.9?
Yes, it will not work with 3.9. It need tiny modification, it is because the way to access Squeak icons has a bit changed between 3.8 and 3.8.
For now you can use it with 3.8
On 7/5/06, Torsten Sadowski torsten.sadowski@tu-berlin.de wrote:
DrGApp new in a workspace.
Torsten
Am Mittwoch, 5. Juli 2006 19:03 schrieb Lethalman:
How to run DrGeoII? I'm using Squeak 3.9
On 7/5/06, Hilaire Fernandes hilaire@ext.cri74.org wrote:
Hello Torsten,
Torsten Sadowski a écrit :
Very nice!
The only problem I found was the non working property editor.
But maybe
I did something wrong.
A couple of features are not yet implemented
Would you think it feasible to develop DrGeo into a parametric (aka constrain based) sketcher? Its used in about every MCAD software
but I
have never seen
Really I am not sure.
Hilaire
On 7/5/06, Hilaire Fernandes hilaire@ext.cri74.org wrote:
Lethalman a écrit :
I get an error, i'll tell you what's wrong in that when i run Squeak. Has it been tested with 3.9?
Yes, it will not work with 3.9. It need tiny modification, it is because the way to access Squeak icons has a bit changed between 3.8 and 3.8.
I just could open a DrGWindow but when i click on an image i get an error on mouse release.
For now you can use it with 3.8
Ok, i think' i'll wait until it works on a 3.9 image. Good work.
On Wed, 05 Jul 2006 19:36:24 +0200, Hilaire Fernandes hilaire@ext.cri74.org wrote: This is the bug report, hope it helps:
VM: unix - a SmalltalkImage Image: Squeak3.9alpha [latest update: #7024]
SecurityManager state: Restricted: false FileAccess: true SocketAccess: true Working Dir /home/luca/smalltalk/squeak Trusted Dir /home/luca/smalltalk/squeak/secure Untrusted Dir /home/luca/smalltalk/squeak/My Squeak
MenuIcons class(Object)>>doesNotUnderstand: #undoIcon Receiver: MenuIcons Arguments and temporary variables: aMessage: undoIcon Receiver's instance variables: superclass: Object methodDict: a MethodDictionary() format: 2 traitComposition: {} localSelectors: nil instanceVariables: nil organization: ('as yet unclassified')
subclasses: nil name: #MenuIcons classPool: a Dictionary(#Icons->an IdentityDictionary(size 130) #TranslatedIcon...etc... sharedPools: nil environment: a SystemDictionary(lots of globals) category: #'Morphic-Menus'
DrGGeometryView>>toolBar Receiver: a DrGGeometryView Arguments and temporary variables: bar: nil buttons: nil aKey: nil Receiver's instance variables: domain: a DrGDomain gridStuck: false presenter: nil area: a DrGDrawable(3239) drgeoApp: a DrGApp costumes: an OrderedCollection() ox: 0.0 oy: 0.0 scale: 34.0 selection: nil toolbar: a Dictionary()
DrGGeometryView>>buildArea Receiver: a DrGGeometryView Arguments and temporary variables: offset: nil message: nil Receiver's instance variables: domain: a DrGDomain gridStuck: false presenter: nil area: a DrGDrawable(3239) drgeoApp: a DrGApp costumes: an OrderedCollection() ox: 0.0 oy: 0.0 scale: 34.0 selection: nil toolbar: a Dictionary()
DrGGeometryView>>initialize Receiver: a DrGGeometryView Arguments and temporary variables:
Receiver's instance variables: domain: a DrGDomain gridStuck: false presenter: nil area: a DrGDrawable(3239) drgeoApp: a DrGApp costumes: an OrderedCollection() ox: 0.0 oy: 0.0 scale: 34.0 selection: nil toolbar: a Dictionary()
--- The full stack --- MenuIcons class(Object)>>doesNotUnderstand: #undoIcon DrGGeometryView>>toolBar DrGGeometryView>>buildArea DrGGeometryView>>initialize - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - DrGGeometryView class>>with: DrGGeometryPresenter class>>with: DrGApp>>initialize DrGApp class>>in: DrGApp class>>new UndefinedObject>>DoIt Compiler>>evaluate:in:to:notifying:ifFail:logged: [] in TextMorphEditor(ParagraphEditor)>>evaluateSelection {[rcvr class evaluatorClass new evaluate: self selectionAsStream in: ctxt...]} BlockContext>>on:do: TextMorphEditor(ParagraphEditor)>>evaluateSelection TextMorphEditor(ParagraphEditor)>>doIt [] in TextMorphEditor(ParagraphEditor)>>doIt: {[self doIt]} TextMorphEditor(Controller)>>terminateAndInitializeAround: TextMorphEditor(ParagraphEditor)>>doIt: TextMorphEditor(ParagraphEditor)>>dispatchOnCharacter:with: TextMorphEditor>>dispatchOnCharacter:with: TextMorphEditor(ParagraphEditor)>>readKeyboard TextMorphEditor>>readKeyboard [] in TextMorphForEditView(TextMorph)>>keyStroke: {[editor readKeyboard]} TextMorphForEditView(TextMorph)>>handleInteraction:fromEvent: TextMorphForEditView>>handleInteraction:fromEvent: TextMorphForEditView(TextMorph)>>keyStroke: TextMorphForEditView>>keyStroke: TextMorphForEditView(TextMorph)>>handleKeystroke: KeyboardEvent>>sentTo: TextMorphForEditView(Morph)>>handleEvent: TextMorphForEditView(Morph)>>handleFocusEvent: [] in HandMorph>>sendFocusEvent:to:clear: {[ActiveHand := self. ActiveEvent := anEvent. result := focusHolder han...]} [] in PasteUpMorph>>becomeActiveDuring: {[aBlock value]} BlockContext>>on:do: PasteUpMorph>>becomeActiveDuring: HandMorph>>sendFocusEvent:to:clear: HandMorph>>sendEvent:focus:clear: HandMorph>>sendKeyboardEvent: HandMorph>>handleEvent: HandMorph>>processEvents [] in WorldState>>doOneCycleNowFor: {[:h | ActiveHand := h. h processEvents. capturingGesture := capturingGest...]} Array(SequenceableCollection)>>do: WorldState>>handsDo: WorldState>>doOneCycleNowFor: WorldState>>doOneCycleFor: PasteUpMorph>>doOneCycle [] in Project class>>spawnNewProcess {[[World doOneCycle. Processor yield. false] whileFalse. nil]} [] in BlockContext>>newProcess {[self value. Processor terminateActive]}
Lethalman a écrit :
I get an error, i'll tell you what's wrong in that when i run Squeak. Has it been tested with 3.9?
Yes, it will not work with 3.9. It need tiny modification, it is because the way to access Squeak icons has a bit changed between 3.8 and 3.8.
For now you can use it with 3.8
On 7/5/06, Torsten Sadowski torsten.sadowski@tu-berlin.de wrote:
DrGApp new in a workspace.
Torsten
Am Mittwoch, 5. Juli 2006 19:03 schrieb Lethalman:
How to run DrGeoII? I'm using Squeak 3.9
On 7/5/06, Hilaire Fernandes hilaire@ext.cri74.org wrote:
Hello Torsten,
Torsten Sadowski a écrit :
Very nice!
The only problem I found was the non working property editor.
But maybe
I did something wrong.
A couple of features are not yet implemented
Would you think it feasible to develop DrGeo into a parametric
(aka
constrain based) sketcher? Its used in about every MCAD software
but I
have never seen
Really I am not sure.
Hilaire
squeak-dev@lists.squeakfoundation.org
-
Boris Gaertner -
Bruno Luca -
Hilaire Fernandes -
Lethalman
-
Torsten Sadowski