/Smalltalk/Squeak64/Squeak5.1-16549-64bit.2.image Squeak5.1 latest update: #16549 Current Change Set: WorkSpace Image format 68021 (64 bit)
I have no experience with saving projects, but I thought I would try it and see how it works.
The image I am using has four projects: 1. The root project that opens in a fresh image 2. A Morphic project 3.1 Another Morphic project and, 3.2 An MVC project in the 3.1 Morphic project.
When trying to save 2, I get an error message.
Note: I also tried this on a fresh image with the same results. a. Open new (as downloaded) image. b. Create Morphic project, make no changes, just open it. c. Try to save it >> error
It looks like it is trying to process "(TheWorldMainDockingBar>>#toggleFullScreenOn: "a CompiledMethod(2777225)")"
jrm
Hi John-Reed,
On Fri, Nov 3, 2017 at 3:21 PM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
/Smalltalk/Squeak64/Squeak5.1-16549-64bit.2.image Squeak5.1 latest update: #16549 Current Change Set: WorkSpace Image format 68021 (64 bit)
I have no experience with saving projects, but I thought I would try it and see how it works.
The image I am using has four projects:
- The root project that opens in a fresh image
- A Morphic project
3.1 Another Morphic project and, 3.2 An MVC project in the 3.1 Morphic project.
When trying to save 2, I get an error message.
Note: I also tried this on a fresh image with the same results. a. Open new (as downloaded) image. b. Create Morphic project, make no changes, just open it. c. Try to save it >> error
It looks like it is trying to process "(TheWorldMainDockingBar>>#toggleFullScreenOn: "a CompiledMethod(2777225)")"
Yes, there are VM bugs with ImageSegment on Spur. I haven't had time to debug yet. Things have been getting slowly better (recently the size limit for Spur image segments was lifted) but I haven't got the bugs out yet.
_,,,^..^,,,_ best, Eliot
Squeak 4.6 is the last image where project saving works. Maybe it is possible to use that version in the meantime.
Or alternatively copy all your morphs on the world PasteUpMorph to a RectangleMorph and save that as a '*.morph* file.
Depending on which morphs you have used the *.morph files may be dropped into on a desktop of a wide range of Squeak versions.
More on alternatives which might work see http://wiki.squeak.org/squeak/6451
--Hannes
On 11/8/17, Eliot Miranda eliot.miranda@gmail.com wrote:
Hi John-Reed,
On Fri, Nov 3, 2017 at 3:21 PM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
/Smalltalk/Squeak64/Squeak5.1-16549-64bit.2.image Squeak5.1 latest update: #16549 Current Change Set: WorkSpace Image format 68021 (64 bit)
I have no experience with saving projects, but I thought I would try it and see how it works.
The image I am using has four projects:
- The root project that opens in a fresh image
- A Morphic project
3.1 Another Morphic project and, 3.2 An MVC project in the 3.1 Morphic project.
When trying to save 2, I get an error message.
Note: I also tried this on a fresh image with the same results. a. Open new (as downloaded) image. b. Create Morphic project, make no changes, just open it. c. Try to save it >> error
It looks like it is trying to process "(TheWorldMainDockingBar>>#toggleFullScreenOn: "a CompiledMethod(2777225)")"
Yes, there are VM bugs with ImageSegment on Spur. I haven't had time to debug yet. Things have been getting slowly better (recently the size limit for Spur image segments was lifted) but I haven't got the bugs out yet.
_,,,^..^,,,_ best, Eliot
Hi Hannes,
in the latest VM commit I fixed a serious bug with image segments. This could have fixed project saving. If you have time and e drug please test. Thanks.
_,,,^..^,,,_ (phone)
On Nov 23, 2017, at 3:24 AM, H. Hirzel hannes.hirzel@gmail.com wrote:
Squeak 4.6 is the last image where project saving works. Maybe it is possible to use that version in the meantime.
Or alternatively copy all your morphs on the world PasteUpMorph to a RectangleMorph and save that as a '*.morph* file.
Depending on which morphs you have used the *.morph files may be dropped into on a desktop of a wide range of Squeak versions.
More on alternatives which might work see http://wiki.squeak.org/squeak/6451
--Hannes
On 11/8/17, Eliot Miranda eliot.miranda@gmail.com wrote: Hi John-Reed,
On Fri, Nov 3, 2017 at 3:21 PM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
/Smalltalk/Squeak64/Squeak5.1-16549-64bit.2.image Squeak5.1 latest update: #16549 Current Change Set: WorkSpace Image format 68021 (64 bit)
I have no experience with saving projects, but I thought I would try it and see how it works.
The image I am using has four projects:
- The root project that opens in a fresh image
- A Morphic project
3.1 Another Morphic project and, 3.2 An MVC project in the 3.1 Morphic project.
When trying to save 2, I get an error message.
Note: I also tried this on a fresh image with the same results. a. Open new (as downloaded) image. b. Create Morphic project, make no changes, just open it. c. Try to save it >> error
It looks like it is trying to process "(TheWorldMainDockingBar>>#toggleFullScreenOn: "a CompiledMethod(2777225)")"
Yes, there are VM bugs with ImageSegment on Spur. I haven't had time to debug yet. Things have been getting slowly better (recently the size limit for Spur image segments was lifted) but I haven't got the bugs out yet.
_,,,^..^,,,_ best, Eliot
Version: Squeak5.1 Update: 16551
Testing on an image with multiple Morphic and one MVC project. Fails in both.
-jrm
On Wed, Dec 13, 2017 at 1:02 PM, Eliot Miranda eliot.miranda@gmail.com wrote:
Hi Hannes,
in the latest VM commit I fixed a serious bug with image segments.This could have fixed project saving. If you have time and e drug please test. Thanks.
_,,,^..^,,,_ (phone)
On Nov 23, 2017, at 3:24 AM, H. Hirzel hannes.hirzel@gmail.com wrote:
Squeak 4.6 is the last image where project saving works. Maybe it is possible to use that version in the meantime.
Or alternatively copy all your morphs on the world PasteUpMorph to a RectangleMorph and save that as a '*.morph* file.
Depending on which morphs you have used the *.morph files may be dropped into on a desktop of a wide range of Squeak versions.
More on alternatives which might work see http://wiki.squeak.org/squeak/6451
--Hannes
On 11/8/17, Eliot Miranda eliot.miranda@gmail.com wrote: Hi John-Reed,
On Fri, Nov 3, 2017 at 3:21 PM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
/Smalltalk/Squeak64/Squeak5.1-16549-64bit.2.image Squeak5.1 latest update: #16549 Current Change Set: WorkSpace Image format 68021 (64 bit)
I have no experience with saving projects, but I thought I would try it and see how it works.
The image I am using has four projects:
- The root project that opens in a fresh image
- A Morphic project
3.1 Another Morphic project and, 3.2 An MVC project in the 3.1 Morphic project.
When trying to save 2, I get an error message.
Note: I also tried this on a fresh image with the same results. a. Open new (as downloaded) image. b. Create Morphic project, make no changes, just open it. c. Try to save it >> error
It looks like it is trying to process "(TheWorldMainDockingBar>>#toggleFullScreenOn: "a CompiledMethod(2777225)")"
Yes, there are VM bugs with ImageSegment on Spur. I haven't had time to debug yet. Things have been getting slowly better (recently the size
limit
for Spur image segments was lifted) but I haven't got the bugs out yet.
_,,,^..^,,,_ best, Eliot
Hi John-Reed,
On Wed, Dec 20, 2017 at 3:11 PM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
Version: Squeak5.1 Update: 16551
Testing on an image with multiple Morphic and one MVC project. Fails in both.
I think this is good news :-). a) it's not a VM crash, b) you're well behind the update stream which is here abouts:
========== Update completed: 17587 -> 17596 ==========
So try updating and see how you get one.
-jrm
On Wed, Dec 13, 2017 at 1:02 PM, Eliot Miranda eliot.miranda@gmail.com wrote:
Hi Hannes,
in the latest VM commit I fixed a serious bug with image segments.This could have fixed project saving. If you have time and e drug please test. Thanks.
_,,,^..^,,,_ (phone)
On Nov 23, 2017, at 3:24 AM, H. Hirzel hannes.hirzel@gmail.com wrote:
Squeak 4.6 is the last image where project saving works. Maybe it is possible to use that version in the meantime.
Or alternatively copy all your morphs on the world PasteUpMorph to a RectangleMorph and save that as a '*.morph* file.
Depending on which morphs you have used the *.morph files may be dropped into on a desktop of a wide range of Squeak versions.
More on alternatives which might work see http://wiki.squeak.org/squeak/6451
--Hannes
On 11/8/17, Eliot Miranda eliot.miranda@gmail.com wrote: Hi John-Reed,
On Fri, Nov 3, 2017 at 3:21 PM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
/Smalltalk/Squeak64/Squeak5.1-16549-64bit.2.image Squeak5.1 latest update: #16549 Current Change Set: WorkSpace Image format 68021 (64 bit)
I have no experience with saving projects, but I thought I would try
it
and see how it works.
The image I am using has four projects:
- The root project that opens in a fresh image
- A Morphic project
3.1 Another Morphic project and, 3.2 An MVC project in the 3.1 Morphic project.
When trying to save 2, I get an error message.
Note: I also tried this on a fresh image with the same results. a. Open new (as downloaded) image. b. Create Morphic project, make no changes, just open it. c. Try to save it >> error
It looks like it is trying to process "(TheWorldMainDockingBar>>#toggleFullScreenOn: "a CompiledMethod(2777225)")"
Yes, there are VM bugs with ImageSegment on Spur. I haven't had time
to
debug yet. Things have been getting slowly better (recently the size
limit
for Spur image segments was lifted) but I haven't got the bugs out yet.
_,,,^..^,,,_ best, Eliot
And you need a recent VM. Otherwise it will crash as well.
--HH
On 12/21/17, Eliot Miranda eliot.miranda@gmail.com wrote:
Hi John-Reed,
On Wed, Dec 20, 2017 at 3:11 PM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
Version: Squeak5.1 Update: 16551
Testing on an image with multiple Morphic and one MVC project. Fails in both.
I think this is good news :-). a) it's not a VM crash, b) you're well behind the update stream which is here abouts:
========== Update completed: 17587 -> 17596 ==========
So try updating and see how you get one.
-jrm
On Wed, Dec 13, 2017 at 1:02 PM, Eliot Miranda eliot.miranda@gmail.com wrote:
Hi Hannes,
in the latest VM commit I fixed a serious bug with image segments.This could have fixed project saving. If you have time and e drug please test. Thanks.
_,,,^..^,,,_ (phone)
On Nov 23, 2017, at 3:24 AM, H. Hirzel hannes.hirzel@gmail.com wrote:
Squeak 4.6 is the last image where project saving works. Maybe it is possible to use that version in the meantime.
Or alternatively copy all your morphs on the world PasteUpMorph to a RectangleMorph and save that as a '*.morph* file.
Depending on which morphs you have used the *.morph files may be dropped into on a desktop of a wide range of Squeak versions.
More on alternatives which might work see http://wiki.squeak.org/squeak/6451
--Hannes
On 11/8/17, Eliot Miranda eliot.miranda@gmail.com wrote: Hi John-Reed,
On Fri, Nov 3, 2017 at 3:21 PM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
/Smalltalk/Squeak64/Squeak5.1-16549-64bit.2.image Squeak5.1 latest update: #16549 Current Change Set: WorkSpace Image format 68021 (64 bit)
I have no experience with saving projects, but I thought I would try
it
and see how it works.
The image I am using has four projects:
- The root project that opens in a fresh image
- A Morphic project
3.1 Another Morphic project and, 3.2 An MVC project in the 3.1 Morphic project.
When trying to save 2, I get an error message.
Note: I also tried this on a fresh image with the same results. a. Open new (as downloaded) image. b. Create Morphic project, make no changes, just open it. c. Try to save it >> error
It looks like it is trying to process "(TheWorldMainDockingBar>>#toggleFullScreenOn: "a CompiledMethod(2777225)")"
Yes, there are VM bugs with ImageSegment on Spur. I haven't had time
to
debug yet. Things have been getting slowly better (recently the size
limit
for Spur image segments was lifted) but I haven't got the bugs out yet.
_,,,^..^,,,_ best, Eliot
-- _,,,^..^,,,_ best, Eliot
Tried again with: http://files.squeak.org/6.0alpha/Squeak6.0alpha-17612-64bit/Squeak6.0alpha-1...
I assume that this includes a recent VM, if not, I will need some advice on where to get one, which I think I need because I did crash again.
jrm
On Thu, Dec 21, 2017 at 2:23 AM, H. Hirzel hannes.hirzel@gmail.com wrote:
And you need a recent VM. Otherwise it will crash as well.
--HH
On 12/21/17, Eliot Miranda eliot.miranda@gmail.com wrote:
Hi John-Reed,
On Wed, Dec 20, 2017 at 3:11 PM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
Version: Squeak5.1 Update: 16551
Testing on an image with multiple Morphic and one MVC project. Fails in both.
I think this is good news :-). a) it's not a VM crash, b) you're well behind the update stream which is here abouts:
========== Update completed: 17587 -> 17596 ==========
So try updating and see how you get one.
-jrm
On Wed, Dec 13, 2017 at 1:02 PM, Eliot Miranda <eliot.miranda@gmail.com
wrote:
Hi Hannes,
in the latest VM commit I fixed a serious bug with image segments.This could have fixed project saving. If you have time and e drug please test. Thanks.
_,,,^..^,,,_ (phone)
On Nov 23, 2017, at 3:24 AM, H. Hirzel hannes.hirzel@gmail.com wrote:
Squeak 4.6 is the last image where project saving works. Maybe it is possible to use that version in the meantime.
Or alternatively copy all your morphs on the world PasteUpMorph to a RectangleMorph and save that as a '*.morph* file.
Depending on which morphs you have used the *.morph files may be dropped into on a desktop of a wide range of Squeak versions.
More on alternatives which might work see http://wiki.squeak.org/squeak/6451
--Hannes
On 11/8/17, Eliot Miranda eliot.miranda@gmail.com wrote: Hi John-Reed,
On Fri, Nov 3, 2017 at 3:21 PM, John-Reed Maffeo <
jrmaffeo@gmail.com>
wrote:
> /Smalltalk/Squeak64/Squeak5.1-16549-64bit.2.image > Squeak5.1 > latest update: #16549 > Current Change Set: WorkSpace > Image format 68021 (64 bit) > > I have no experience with saving projects, but I thought I would
try
it
> and see how it works. > > The image I am using has four projects: > 1. The root project that opens in a fresh image > 2. A Morphic project > 3.1 Another Morphic project and, > 3.2 An MVC project in the 3.1 Morphic project. > > When trying to save 2, I get an error message. > > Note: I also tried this on a fresh image with the same results. > a. Open new (as downloaded) image. > b. Create Morphic project, make no changes, just open it. > c. Try to save it >> error > > It looks like it is trying to process > "(TheWorldMainDockingBar>>#toggleFullScreenOn: > "a CompiledMethod(2777225)")" >
Yes, there are VM bugs with ImageSegment on Spur. I haven't had
time
to
debug yet. Things have been getting slowly better (recently the
size
limit
for Spur image segments was lifted) but I haven't got the bugs out yet.
_,,,^..^,,,_ best, Eliot
-- _,,,^..^,,,_ best, Eliot
Hi John-Reed,
On Fri, Dec 22, 2017 at 10:35 AM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
Tried again with: http://files.squeak.org/6.0alpha/Squeak6.0alpha-17612-64bit/ Squeak6.0alpha-17612-64bit.app
I assume that this includes a recent VM, if not, I will need some advice on where to get one, which I think I need because I did crash again.
You can get the latest VMs from https://dl.bintray.com/opensmalltalk/vm/
The place to find this link is on the Downloads page of squeak.org. It's the Virtual Machines, Open Smalltalk VMs, trunk link.
Apparently there's also a link on the opensmalltalk/vm webpage on github but I can never see it. I have bad link blindness.
HTH
jrm
On Thu, Dec 21, 2017 at 2:23 AM, H. Hirzel hannes.hirzel@gmail.com wrote:
And you need a recent VM. Otherwise it will crash as well.
--HH
On 12/21/17, Eliot Miranda eliot.miranda@gmail.com wrote:
Hi John-Reed,
On Wed, Dec 20, 2017 at 3:11 PM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
Version: Squeak5.1 Update: 16551
Testing on an image with multiple Morphic and one MVC project. Fails in both.
I think this is good news :-). a) it's not a VM crash, b) you're well behind the update stream which is here abouts:
========== Update completed: 17587 -> 17596 ==========
So try updating and see how you get one.
-jrm
On Wed, Dec 13, 2017 at 1:02 PM, Eliot Miranda <
eliot.miranda@gmail.com>
wrote:
Hi Hannes,
in the latest VM commit I fixed a serious bug with image segments.This could have fixed project saving. If you have time and e drug please test. Thanks.
_,,,^..^,,,_ (phone)
On Nov 23, 2017, at 3:24 AM, H. Hirzel hannes.hirzel@gmail.com wrote:
Squeak 4.6 is the last image where project saving works. Maybe it is possible to use that version in the meantime.
Or alternatively copy all your morphs on the world PasteUpMorph to a RectangleMorph and save that as a '*.morph* file.
Depending on which morphs you have used the *.morph files may be dropped into on a desktop of a wide range of Squeak versions.
More on alternatives which might work see http://wiki.squeak.org/squeak/6451
--Hannes
> On 11/8/17, Eliot Miranda eliot.miranda@gmail.com wrote: > Hi John-Reed, > > On Fri, Nov 3, 2017 at 3:21 PM, John-Reed Maffeo <
jrmaffeo@gmail.com>
> wrote: > >> /Smalltalk/Squeak64/Squeak5.1-16549-64bit.2.image >> Squeak5.1 >> latest update: #16549 >> Current Change Set: WorkSpace >> Image format 68021 (64 bit) >> >> I have no experience with saving projects, but I thought I would
try
it
>> and see how it works. >> >> The image I am using has four projects: >> 1. The root project that opens in a fresh image >> 2. A Morphic project >> 3.1 Another Morphic project and, >> 3.2 An MVC project in the 3.1 Morphic project. >> >> When trying to save 2, I get an error message. >> >> Note: I also tried this on a fresh image with the same results. >> a. Open new (as downloaded) image. >> b. Create Morphic project, make no changes, just open it. >> c. Try to save it >> error >> >> It looks like it is trying to process >> "(TheWorldMainDockingBar>>#toggleFullScreenOn: >> "a CompiledMethod(2777225)")" >> > > Yes, there are VM bugs with ImageSegment on Spur. I haven't had
time
to
> debug yet. Things have been getting slowly better (recently the
size
limit
> for Spur image segments was lifted) but I haven't got the bugs out > yet. > > > _,,,^..^,,,_ > best, Eliot >
-- _,,,^..^,,,_ best, Eliot
On Fri, 22 Dec 2017 at 7:35 pm, John-Reed Maffeo jrmaffeo@gmail.com wrote:
Tried again with:
http://files.squeak.org/6.0alpha/Squeak6.0alpha-17612-64bit/Squeak6.0alpha-1...
I assume that this includes a recent VM, if not, I will need some advice on where to get one, which I think I need because I did crash again.
I will update the VMs that come with our trunk bundles soon, the current ones are actually quite old...
jrm
On Thu, Dec 21, 2017 at 2:23 AM, H. Hirzel hannes.hirzel@gmail.com wrote:
And you need a recent VM. Otherwise it will crash as well.
--HH
On 12/21/17, Eliot Miranda eliot.miranda@gmail.com wrote:
Hi John-Reed,
On Wed, Dec 20, 2017 at 3:11 PM, John-Reed Maffeo jrmaffeo@gmail.com wrote:
Version: Squeak5.1 Update: 16551
Testing on an image with multiple Morphic and one MVC project. Fails in both.
I think this is good news :-). a) it's not a VM crash, b) you're well behind the update stream which is here abouts:
========== Update completed: 17587 -> 17596 ==========
So try updating and see how you get one.
-jrm
On Wed, Dec 13, 2017 at 1:02 PM, Eliot Miranda <
eliot.miranda@gmail.com>
wrote:
Hi Hannes,
in the latest VM commit I fixed a serious bug with image segments.This could have fixed project saving. If you have time and e drug please test. Thanks.
_,,,^..^,,,_ (phone)
On Nov 23, 2017, at 3:24 AM, H. Hirzel hannes.hirzel@gmail.com wrote:
Squeak 4.6 is the last image where project saving works. Maybe it is possible to use that version in the meantime.
Or alternatively copy all your morphs on the world PasteUpMorph to a RectangleMorph and save that as a '*.morph* file.
Depending on which morphs you have used the *.morph files may be dropped into on a desktop of a wide range of Squeak versions.
More on alternatives which might work see http://wiki.squeak.org/squeak/6451
--Hannes
> On 11/8/17, Eliot Miranda eliot.miranda@gmail.com wrote: > Hi John-Reed, > > On Fri, Nov 3, 2017 at 3:21 PM, John-Reed Maffeo <
jrmaffeo@gmail.com>
> wrote: > >> /Smalltalk/Squeak64/Squeak5.1-16549-64bit.2.image >> Squeak5.1 >> latest update: #16549 >> Current Change Set: WorkSpace >> Image format 68021 (64 bit) >> >> I have no experience with saving projects, but I thought I would
try
it
>> and see how it works. >> >> The image I am using has four projects: >> 1. The root project that opens in a fresh image >> 2. A Morphic project >> 3.1 Another Morphic project and, >> 3.2 An MVC project in the 3.1 Morphic project. >> >> When trying to save 2, I get an error message. >> >> Note: I also tried this on a fresh image with the same results. >> a. Open new (as downloaded) image. >> b. Create Morphic project, make no changes, just open it. >> c. Try to save it >> error >> >> It looks like it is trying to process >> "(TheWorldMainDockingBar>>#toggleFullScreenOn: >> "a CompiledMethod(2777225)")" >> > > Yes, there are VM bugs with ImageSegment on Spur. I haven't had
time
to
> debug yet. Things have been getting slowly better (recently the
size
limit
> for Spur image segments was lifted) but I haven't got the bugs out > yet. > > > _,,,^..^,,,_ > best, Eliot >
-- _,,,^..^,,,_ best, Eliot
squeak-dev@lists.squeakfoundation.org
-
Eliot Miranda -
Fabio Niephaus -
H. Hirzel -
John-Reed Maffeo