Re: [squeak-dev] Re: Testing Seaside in Squeak4.3alpha-11793 - Squeak-dev

25 Nov 2011


      Dale
A retest some time later
(Installer ss project: 'MetacelloRepository') install:
'ConfigurationOfSeaside30'.
 ((Smalltalk at: #ConfigurationOfSeaside30) project version: '3.0.5') load.
(Smalltalk at: #WAPharoServerAdaptorBrowser) open.
loaded fine into Squeak4.3gamma-11793
The 'start' button in the Seaside panel still does not work. However
with the workaround of inspecting the adaptor and doing 'self start'
it is fine.
--Hannes
On 6/30/11, Dale Henrichs dhenrich@vmware.com wrote:
...
Hannes,
To give you additional information ...
From the #record output, it appears that Seaside30 was already loaded in the
image when you ran #record ... otherwise I would expect to see a whole lot
of "Load ....mcz" records:)
If you do something like the following:
| version |
   version := (Smalltalk at: #ConfigurationOfSeaside30) project
                  version: '3.0.5'.
   version ignoreImage: true.
   version record.
The output should list _all_ of the packages that would be loaded into the
image if Seaside3.0 hadn't already been loaded ... sometimes that is useful
too.
I haven't been trying to keep up with the evolution of the various
registration APIs that are used by the different versions of Pharo and
Squeak ... that's presumably why the control panel is missing from the
menu...
Dale
----- Original Message -----
| From: "H. Hirzel" hannes.hirzel@gmail.com
| To: "Dale Henrichs" dhenrich@vmware.com
| Cc: seaside@lists.squeakfoundation.org,
squeak-dev@lists.squeakfoundation.org
| Sent: Wednesday, June 29, 2011 4:18:59 PM
| Subject: Re: [squeak-dev] Re: Testing Seaside in Squeak4.3alpha-11481
|
| Thank you, Dale
|
| I did
|  ((Smalltalk at: #ConfigurationOfSeaside30) project version: '3.0.5')
|  record.
| in Squeak 4.3-11481
|
| Unfortunately there is no Seaside control panel anymore in the apps
| menu. It was present in an ealier Seaside in Squeak 4.2. Perhaps
| Randal is referring to this....
|
| Hannes
|
|

|
| Squeak4.3alpha-11481.image priorSource: 3256581
| Loading 1.0-beta.29 of ConfigurationOfMetacello...
| Fetched -> ConfigurationOfGofer-dkh.34 ---
| http://seaside.gemstone.com/ss/metacello ---
| http://www.squeaksource.com/MetacelloRepository
| Loaded -> ConfigurationOfGofer-dkh.34 ---
| http://seaside.gemstone.com/ss/metacello ---
| http://www.squeaksource.com/MetacelloRepository
| Fetched -> ConfigurationOfHelpSystem-DaleHenrichs.13 ---
| http://www.squeaksource.com/MetacelloRepository ---
| http://www.squeaksource.com/MetacelloRepository
| Loaded -> ConfigurationOfHelpSystem-DaleHenrichs.13 ---
| http://www.squeaksource.com/MetacelloRepository ---
| http://www.squeaksource.com/MetacelloRepository
| Project: Gofer Core 1.0.5
| Fetched -> Gofer-Core.squeak-dkh.135 ---
| http://seaside.gemstone.com/ss/metacello ---
| http://seaside.gemstone.com/ss/metacello
| Fetched -> Metacello-Core-dkh.465 ---
| http://seaside.gemstone.com/ss/metacello ---
| http://www.squeaksource.com/metacello
| Fetched -> Metacello-MC-dkh.522 ---
| http://www.squeaksource.com/metacello ---
| http://seaside.gemstone.com/ss/metacello
| Fetched -> Metacello-Platform.squeak-dkh.10 ---
| http://seaside.gemstone.com/ss/metacello ---
| http://www.squeaksource.com/metacello
| Fetched -> Metacello-ToolBox-dkh.105 ---
| http://www.squeaksource.com/metacello ---
| http://seaside.gemstone.com/ss/metacello
| Project: Help System 1.1
| Fetched -> Metacello-Help-dkh.11 ---
| http://seaside.gemstone.com/ss/metacello ---
| http://www.squeaksource.com/metacello
| Loaded -> Gofer-Core.squeak-dkh.135 ---
| http://seaside.gemstone.com/ss/metacello --- cache
| Starting atomic load
| 	Loaded -> Metacello-Core-dkh.465 ---
| http://seaside.gemstone.com/ss/metacello --- cache
| 	Loaded -> Metacello-MC-dkh.522 ---
| http://www.squeaksource.com/metacello --- cache
| 	Loaded -> Metacello-Platform.squeak-dkh.10 ---
| http://seaside.gemstone.com/ss/metacello --- cache
| 	Loaded -> Metacello-ToolBox-dkh.105 ---
| http://www.squeaksource.com/metacello --- cache
| 	Loaded -> Metacello-Help-dkh.11 ---
| http://seaside.gemstone.com/ss/metacello --- cache
| Finished atomic load
| ...finished 1.0-beta.29
| Loading 1.0-beta.29 of ConfigurationOfMetacello...
| Project: Gofer Core 1.0.5
| Project: Help System 1.1
| ...finished 1.0-beta.29
| Recording 3.0.5 of ConfigurationOfSeaside30...
| Project: Grease Core 1.0.5
| Fetched -> ConfigurationOfGrease-dkh.149 ---
| http://www.squeaksource.com/MetacelloRepository ---
| http://www.squeaksource.com/MetacelloRepository
| Loaded -> ConfigurationOfGrease-dkh.149 ---
| http://www.squeaksource.com/MetacelloRepository --- C:\Documents and
| Settings\user\My Documents\My Squeak\Squeak
| 4.3-alpha-11481\package-cache
| Project: Grease Core Tests 1.0.5
| Project: Swazoo2 2.3.0.0
| Fetched -> ConfigurationOfSwazoo2-janko.29 ---
| http://www.squeaksource.com/MetacelloRepository ---
| http://www.squeaksource.com/MetacelloRepository
| Loaded -> ConfigurationOfSwazoo2-janko.29 ---
| http://www.squeaksource.com/MetacelloRepository --- C:\Documents and
| Settings\user\My Documents\My Squeak\Squeak
| 4.3-alpha-11481\package-cache
| Project: Sport2 2.31
| Fetched -> ConfigurationOfSPort2-DaleHenrichs.4 ---
| http://www.squeaksource.com/MetacelloRepository ---
| http://www.squeaksource.com/MetacelloRepository
| Loaded -> ConfigurationOfSPort2-DaleHenrichs.4 ---
| http://www.squeaksource.com/MetacelloRepository --- C:\Documents and
| Settings\user\My Documents\My Squeak\Squeak
| 4.3-alpha-11481\package-cache
| Project: Kom 1.0.9
| Fetched -> ConfigurationOfKomHttpServer-dkh.25 ---
| http://www.squeaksource.com/MetacelloRepository ---
| http://www.squeaksource.com/MetacelloRepository
| Loaded -> ConfigurationOfKomHttpServer-dkh.25 ---
| http://www.squeaksource.com/MetacelloRepository --- C:\Documents and
| Settings\user\My Documents\My Squeak\Squeak
| 4.3-alpha-11481\package-cache
| Project: OB stable
| Fetched -> ConfigurationOfOmniBrowser-dkh.144 ---
| http://www.squeaksource.com/MetacelloRepository ---
| http://www.squeaksource.com/MetacelloRepository
| ConfigurationOfOmniBrowser>>postLoadOBStandardPharo12 (OBCodeBrowser
| is Undeclared)
| ConfigurationOfOmniBrowser>>postLoadOBStandardPharo13 (OBCodeBrowser
| is Undeclared)
| Loaded -> ConfigurationOfOmniBrowser-dkh.144 ---
| http://www.squeaksource.com/MetacelloRepository --- C:\Documents and
| Settings\user\My Documents\My Squeak\Squeak
| 4.3-alpha-11481\package-cache
| Project: SPort2 2.31
| ...finished 3.0.5
|
|
|
| On 6/29/11, Dale Henrichs dhenrich@vmware.com wrote:
| > Hannes,
| >
| > The #record message should be sent to a version so you need to do
| > something
| > like:
| >
| >   ((Smalltalk at: #ConfigurationOfSeaside30) project version:
| >   '3.0.5')
| > record.
| >
| > BTW, that is how load works as well:
| >
| >   ((Smalltalk at: #ConfigurationOfSeaside30) project version:
| >   '3.0.5') load.
| >
| > Dale
| >
| > ----- Original Message -----
| > | From: "H. Hirzel" hannes.hirzel@gmail.com
| > | To: dhenrich@vmware.com
| > | Cc: seaside@lists.squeakfoundation.org
| > | Sent: Wednesday, June 29, 2011 3:16:14 PM
| > | Subject: Fwd: [squeak-dev] Re: Testing Seaside in
| > | Squeak4.3alpha-11481
| > |
| > | Dale
| > |
| > | It seems that my answer was hidden under a pile of other emails.
| > |
| > | I actually tried to do what you recommend to use
| > |    render
| > |
| > |  (Smalltalk at: #ConfigurationOfSeaside30) record
| > |
| > | to get the load sequence of ConfigurationOfSeaside30-dkh.316   in
| > | Squeak 4.3-11481. But it did not work.
| > |
| > | What am I missing?
| > |
| > | Regards
| > | Hannes
| > |
| > |
| > |
| > | ---------- Forwarded message ----------
| > | From: "H. Hirzel" hannes.hirzel@gmail.com
| > | Date: Tue, 21 Jun 2011 05:46:29 +0000
| > | Subject: Re: [squeak-dev] Re: Testing Seaside in
| > | Squeak4.3alpha-11481
| > | To: The general-purpose Squeak developers list
| > | squeak-dev@lists.squeakfoundation.org
| > | Cc: dhenrich@vmware.com
| > |
| > | On 6/6/11, Dale Henrichs dhenrich@vmware.com wrote:
| > | > Hannes,
| > | >
| > | > If you want to do a test load, you can use #record or #record:
| > | > instead of
| > | > #load or #load: and print the result ... you'll get a listing
| > | > of
| > | > the
| > | > packages and configurations that will be loaded into your image
| > | > ...
| > | >
| > | > I assume that the Button problem is related to an OB issue on
| > | > Squeak. I am
| > | > not aware of a fix, but if a fixed version appears I can update
| > | > the
| > | > ConfigurationOfOmniBrowser to point to the appropriate packages
| > | > ....
| > | >
| > | > Dale
| > |
| > |
| > | Dale,
| > |
| > | Thank you for pointing me to the use of the
| > |
| > |    #record
| > |
| > | method instead of #load.
| > | I was not aware of this logging feature. However it did not work
| > | in
| > | ftp://ftp.squeak.org/4.3alpha/Squeak4.3alpha-11481.zip
| > |
| > |
| > | If I do
| > |
| > | "Seaside 3.0 http://www.seaside.st"
| > | (Installer ss project: 'MetacelloRepository') install:
| > | 'ConfigurationOfSeaside30'.
| > | (Smalltalk at: #ConfigurationOfSeaside30) load.
| > | (Smalltalk at: #WAPharoServerAdaptorBrowser) open.
| > |
| > |
| > | I get the error message that
| > |
| > | ConfigurationOfSeaside30 does not understand #record.
| > |
| > | What am I missing here?
| > |
| > | Regards
| > | Hannes
| > |
| >
|