om,
Excited that I might finally get a version of squeak's 3D system that doesn't crash by the recient list trafic, I did the following:
1. did "cvs update" in blahblahblah/squeak
2. loaded my experamental immage (one that I keep in blahblahblah/squeak/experamental that is mostly clean and used only for VM hacking and then retrieved all code updates from both the update server and squeak map...
3. Cleaned out blahblahblah/squeak/src and re-generated the VM source.
4. cleaned out the build directory and ran configure.
Since I'm running on a multiprocessor machine I first ran " make -j 2 " It errored out..
Below is the result of the second run of a normal make:
It is possible that I had made some misguided change to the VM source in my immage that is now coming back to haunt me... Is anyone else getting this problem?
Can you suggest any tests I should run with my experamental immage?
blahblahblah/configure --disable-B3DAcceleratorPlugin doesn't have any effect.
Attached is the configure log
Also of note: Due to hardware problems I have had to revert to the second oldest PCI video card in my vast collection... OpenGL support is through MesaGL.
////////////////////////////////////////////////////////////////////////////////////////////////////////// atg@AlonzoGC:~/source/squeak/bld> make make[1]: `vm.a' is up to date. make[1]: `ADPCMCodecPlugin.a' is up to date. make[1]: `AsynchFilePlugin.a' is up to date. gcc -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -Wall -Wno-unknown-pragmas -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -I/home/atg/source/squeak/bld -I/home/atg/source/squeak/platforms/unix/vm -I/home/atg/source/squeak/platforms/Cross/vm -I/usr/X11R6/include -DHAVE_CONFIG_H -DSQUEAK_BUILTIN_PLUGIN -I/home/atg/source/squeak/bld -I/home/atg/source/squeak/platforms/unix/vm -I/home/atg/source/squeak/platforms/Cross/vm -I/home/atg/source/squeak/platforms/Cross/plugins/B3DAcceleratorPlugin -I/home/atg/source/squeak/platforms/unix/plugins/B3DAcceleratorPlugin -c -o B3DAcceleratorPlugin.o /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `halt': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:130: warning: control reaches end of non-void function /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `msg': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:138: warning: control reaches end of non-void function /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `primitiveRenderVertexBuffer': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:536: `PrimTypeMax' undeclared (first use in this function) /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:536: (Each undeclared identifier is reported only once /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:536: for each function it appears in.) /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `stackLightArrayValue': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:949: `PrimLightSize' undeclared (first use in this function) /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `stackMaterialValue': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:969: `MaterialSize' undeclared (first use in this function) /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `stackPrimitiveVertex': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:1041: `PrimVertexSize' undeclared (first use in this function) /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `stackPrimitiveVertexArrayofSize': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:1061: `PrimVertexSize' undeclared (first use in this function) /usr/include/bits/string2.h: At top level: /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:111: warning: `fetchLightSourceofObject' defined but not used /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:128: warning: `halt' defined but not used /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:136: warning: `msg' defined but not used /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:1034: warning: `stackPrimitiveVertex' defined but not used make[1]: *** [B3DAcceleratorPlugin.o] Error 1 make: *** [B3DAcceleratorPlugin/B3DAcceleratorPlugin.a] Error 2 atg@AlonzoGC:~/source/squeak/bld>
This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was generated by GNU Autoconf 2.52. Invocation command line was
$ ../platforms/unix/config/configure --disable-B3DAccelerator
## ---------- ## ## Platform. ## ## ---------- ##
hostname = AlonzoGC uname -m = i686 uname -r = 2.4.21 uname -s = Linux uname -v = #4 SMP Fri Jun 27 16:23:46 EDT 2003
/usr/bin/uname -p = unknown /bin/uname -X = unknown
/bin/arch = i686 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown
PATH = /usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/usr/lib/java/bin:/opt/gnome/bin
## ------------ ## ## Core tests. ## ## ------------ ##
configure:1133: PATH=".;."; conftest.sh ../platforms/unix/config/configure: conftest.sh: command not found configure:1136: $? = 127 configure:1165: checking sanity of VMMaker src directory configure:1183: result: okay configure:1241: checking build system type configure:1259: result: i686-pc-linux-gnu configure:1269: checking host system type configure:1283: result: i686-pc-linux-gnu configure:1333: checking whether make sets ${MAKE} configure:1353: result: yes configure:1405: checking for gcc configure:1420: found /usr/bin/gcc configure:1428: result: gcc configure:1656: checking for C compiler version configure:1659: gcc --version </dev/null >&5 gcc (GCC) 3.2.2 Copyright (C) 2002 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:1662: $? = 0 configure:1664: gcc -v </dev/null >&5 Reading specs from /usr/lib/gcc-lib/athlon-pc-linux-gnu/3.2.2/specs Configured with: ../gcc-3.2.2/configure --prefix=/usr --host=athlon-pc-linux-gnu Thread model: posix gcc version 3.2.2 configure:1667: $? = 0 configure:1669: gcc -V </dev/null >&5 gcc: argument to `-V' is missing configure:1672: $? = 1 configure:1692: checking for C compiler default output configure:1695: gcc conftest.c >&5 configure:1698: $? = 0 configure:1727: result: a.out configure:1732: checking whether the C compiler works configure:1738: ./a.out configure:1741: $? = 0 configure:1756: result: yes configure:1763: checking whether we are cross compiling configure:1765: result: no configure:1768: checking for executable suffix configure:1770: gcc -o conftest conftest.c >&5 configure:1773: $? = 0 configure:1795: result: configure:1801: checking for object suffix configure:1819: gcc -c conftest.c >&5 configure:1822: $? = 0 configure:1841: result: o configure:1845: checking whether we are using the GNU C compiler configure:1866: gcc -c conftest.c >&5 configure:1869: $? = 0 configure:1872: test -s conftest.o configure:1875: $? = 0 configure:1887: result: yes configure:1893: checking whether gcc accepts -g configure:1911: gcc -c -g conftest.c >&5 configure:1914: $? = 0 configure:1917: test -s conftest.o configure:1920: $? = 0 configure:1930: result: yes configure:1957: gcc -c -g -O2 conftest.c >&5 conftest.c:2: parse error before "me" configure:1960: $? = 1 configure: failed program was: #ifndef __cplusplus choke me #endif configure:2062: checking for as configure:2077: found /usr/bin/as configure:2085: result: as configure:2092: checking for GNU as configure:2101: result: yes configure:2141: checking for ranlib configure:2156: found /usr/local/bin/ranlib configure:2165: result: ranlib configure:2189: checking for a BSD compatible install configure:2238: result: /usr/bin/ginstall -c configure:2260: checking for BSD-compatible nm configure:2296: result: /usr/bin/nm -B configure:2301: checking for ln configure:2316: found /bin/ln configure:2324: result: ln configure:2333: checking "size of int" configure:2347: gcc -o conftest -g -O2 conftest.c >&5 configure:2350: $? = 0 configure:2352: ./conftest configure:2355: $? = 0 configure:2357: result: "okay" configure:2372: checking "size of time_t" configure:2386: gcc -o conftest -g -O2 conftest.c >&5 configure:2389: $? = 0 configure:2391: ./conftest configure:2394: $? = 0 configure:2396: result: "okay" configure:2411: checking "size of double" configure:2425: gcc -o conftest -g -O2 conftest.c >&5 configure:2428: $? = 0 configure:2430: ./conftest configure:2433: $? = 0 configure:2435: result: "okay" configure:2450: checking for 64-bit integer type configure:2466: gcc -o conftest -g -O2 conftest.c >&5 configure:2469: $? = 0 configure:2471: ./conftest configure:2474: $? = 1 configure: program exited with status 1 configure: failed program was: #line 2461 "configure" #include "confdefs.h" int main(){return(sizeof(long) == 8)?0:1;} configure:2492: gcc -o conftest -g -O2 conftest.c >&5 configure:2495: $? = 0 configure:2497: ./conftest configure:2500: $? = 0 configure:2515: result: long long configure:2606: checking for ld used by GCC configure:2669: result: /usr/bin/ld configure:2678: checking if the linker (/usr/bin/ld) is GNU ld GNU ld version 2.13.2.1 configure:2690: result: yes configure:2694: checking for /usr/bin/ld option to reload object files configure:2701: result: -r configure:2706: checking for a sed that does not truncate output configure:2788: result: /usr/bin/sed configure:2791: checking whether ln -s works configure:2795: result: yes configure:2802: checking how to recognise dependent libraries configure:2983: result: pass_all configure:2989: checking command to parse /usr/bin/nm -B output configure:3073: gcc -c -g -O2 conftest.c >&5 configure:3076: $? = 0 configure:3080: /usr/bin/nm -B conftest.o | sed -n -e 's/^.*[ ]([ABCDGISTW][ABCDGISTW]*)[ ][ ]*()([_A-Za-z][_A-Za-z0-9]*)$/\1 \2\3 \3/p' > conftest.nm configure:3083: $? = 0 configure:3135: gcc -o conftest -g -O2 conftest.c conftstm.o >&5 configure:3138: $? = 0 configure:3182: result: ok configure:3191: checking how to run the C preprocessor configure:3217: gcc -E conftest.c configure:3223: $? = 0 configure:3250: gcc -E conftest.c configure:3247:28: ac_nonexistent.h: No such file or directory configure:3256: $? = 1 configure: failed program was: #line 3246 "configure" #include "confdefs.h" #include <ac_nonexistent.h> configure:3293: result: gcc -E configure:3308: gcc -E conftest.c configure:3314: $? = 0 configure:3341: gcc -E conftest.c configure:3338:28: ac_nonexistent.h: No such file or directory configure:3347: $? = 1 configure: failed program was: #line 3337 "configure" #include "confdefs.h" #include <ac_nonexistent.h> configure:3389: checking for dlfcn.h configure:3399: gcc -E conftest.c configure:3405: $? = 0 configure:3424: result: yes configure:3611: checking for ranlib configure:3635: result: ranlib configure:3685: checking for strip configure:3700: found /usr/bin/strip configure:3709: result: strip configure:3911: checking for objdir configure:3922: result: .libs configure:3937: checking for gcc option to produce PIC configure:4083: result: -fPIC configure:4087: checking if gcc PIC flag -fPIC works configure:4107: gcc -c -g -O2 -fPIC -DPIC conftest.c >&5 configure:4110: $? = 0 configure:4113: test -s conftest.o configure:4116: $? = 0 configure:4152: result: yes configure:4168: checking if gcc static flag -static works configure:4189: gcc -o conftest -g -O2 -static conftest.c >&5 configure:4192: $? = 0 configure:4195: test -s conftest configure:4198: $? = 0 configure:4212: result: yes configure:4223: checking if gcc supports -c -o file.o configure:4243: gcc -c -g -O2 -o out/conftest2.o conftest.c >&5 configure:4267: result: yes configure:4272: checking if gcc supports -c -o file.lo configure:4296: gcc -c -g -O2 -c -o conftest.lo conftest.c >&5 configure:4299: $? = 0 configure:4302: test -s conftest.lo configure:4305: $? = 0 configure:4326: result: yes configure:4357: checking if gcc supports -fno-rtti -fno-exceptions configure:4376: gcc -c -g -O2 -fno-rtti -fno-exceptions -c conftest.c conftest.c >&5 configure:4379: $? = 0 configure:4382: test -s conftest.o configure:4385: $? = 0 configure:4401: result: yes configure:4412: checking whether the linker (/usr/bin/ld) supports shared libraries configure:5107: result: yes configure:5112: checking how to hardcode library paths into programs configure:5136: result: immediate configure:5141: checking whether stripping libraries is possible configure:5146: result: yes configure:5157: checking dynamic linker characteristics configure:5564: result: GNU/Linux ld.so configure:5569: checking if libtool supports shared libraries configure:5571: result: yes configure:5574: checking whether to build shared libraries configure:5595: result: yes configure:5598: checking whether to build static libraries configure:5602: result: no configure:6220: checking whether -lc should be explicitly linked in configure:6228: gcc -c -g -O2 conftest.c >&5 configure:6231: $? = 0 configure:6245: gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2>&1 | grep -lc >/dev/null 2>&1 configure:6248: $? = 0 configure:6261: result: no configure:6842: checking for ANSI C header files configure:6856: gcc -E conftest.c configure:6862: $? = 0 configure:6949: gcc -o conftest -g -O2 conftest.c >&5 configure:6952: $? = 0 configure:6954: ./conftest configure:6957: $? = 0 configure:6970: result: yes configure:6983: checking for unistd.h configure:6993: gcc -E conftest.c configure:6999: $? = 0 configure:7018: result: yes configure:6983: checking for string.h configure:6993: gcc -E conftest.c configure:6999: $? = 0 configure:7018: result: yes configure:6983: checking for fcntl.h configure:6993: gcc -E conftest.c configure:6999: $? = 0 configure:7018: result: yes configure:6983: checking for sys/file.h configure:6993: gcc -E conftest.c configure:6999: $? = 0 configure:7018: result: yes configure:6983: checking for sys/param.h configure:6993: gcc -E conftest.c configure:6999: $? = 0 configure:7018: result: yes configure:7031: checking for sys/time.h configure:7041: gcc -E conftest.c configure:7047: $? = 0 configure:7066: result: yes configure:7031: checking for sys/filio.h configure:7041: gcc -E conftest.c configure:7038:23: sys/filio.h: No such file or directory configure:7047: $? = 1 configure: failed program was: #line 7037 "configure" #include "confdefs.h" #include <sys/filio.h> configure:7066: result: no configure:7031: checking for sys/select.h configure:7041: gcc -E conftest.c configure:7047: $? = 0 configure:7066: result: yes configure:7076: checking whether time.h and sys/time.h may both be included configure:7098: gcc -c -g -O2 conftest.c >&5 configure:7101: $? = 0 configure:7104: test -s conftest.o configure:7107: $? = 0 configure:7117: result: yes configure:7130: checking for dirent.h that defines DIR configure:7151: gcc -c -g -O2 conftest.c >&5 configure:7154: $? = 0 configure:7157: test -s conftest.o configure:7160: $? = 0 configure:7170: result: yes configure:7183: checking for opendir in -ldir configure:7210: gcc -o conftest -g -O2 conftest.c -ldir >&5 /usr/bin/ld: cannot find -ldir collect2: ld returned 1 exit status configure:7213: $? = 1 configure: failed program was: #line 7191 "configure" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir (); int main () { opendir (); ; return 0; } configure:7230: result: no configure:7292: checking whether struct tm is in sys/time.h or time.h configure:7312: gcc -c -g -O2 conftest.c >&5 configure:7315: $? = 0 configure:7318: test -s conftest.o configure:7321: $? = 0 configure:7331: result: time.h configure:7341: checking for struct tm.tm_zone configure:7363: gcc -c -g -O2 conftest.c >&5 configure:7366: $? = 0 configure:7369: test -s conftest.o configure:7372: $? = 0 configure:7382: result: yes configure:7451: checking for socklen_t in sys/socket.h configure:7469: gcc -c -g -O2 conftest.c >&5 configure:7472: $? = 0 configure:7475: test -s conftest.o configure:7478: $? = 0 configure:7488: result: yes configure:7494: checking for atexit or on_exit configure:7512: gcc -c -g -O2 conftest.c >&5 configure:7515: $? = 0 configure:7518: test -s conftest.o configure:7521: $? = 0 configure:7561: result: atexit configure:7569: checking for tzset configure:7587: gcc -c -g -O2 conftest.c >&5 configure:7590: $? = 0 configure:7593: test -s conftest.o configure:7596: $? = 0 configure:7606: result: yes configure:7612: checking for gmtoff in struct tm configure:7630: gcc -c -g -O2 conftest.c >&5 configure:7633: $? = 0 configure:7636: test -s conftest.o configure:7639: $? = 0 configure:7649: result: yes configure:7655: checking for timezone and daylight variables configure:7673: gcc -c -g -O2 conftest.c >&5 configure:7676: $? = 0 configure:7679: test -s conftest.o configure:7682: $? = 0 configure:7692: result: yes configure:7698: checking for gethostname in unistd.h configure:7716: gcc -c -g -O2 conftest.c >&5 configure:7719: $? = 0 configure:7722: test -s conftest.o configure:7725: $? = 0 configure:7735: result: yes configure:7757: checking for yp_bind in -lnsl configure:7784: gcc -o conftest -g -O2 conftest.c -lnsl >&5 configure:7787: $? = 0 configure:7790: test -s conftest configure:7793: $? = 0 configure:7804: result: yes configure:7815: checking for socket in -lsocket configure:7842: gcc -o conftest -g -O2 conftest.c -lsocket -lnsl >&5 /usr/bin/ld: cannot find -lsocket collect2: ld returned 1 exit status configure:7845: $? = 1 configure: failed program was: #line 7823 "configure" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char socket (); int main () { socket (); ; return 0; } configure:7862: result: no configure:7873: checking for sin in -lm configure:7900: gcc -o conftest -g -O2 conftest.c -lm -lnsl >&5 configure:7889: warning: conflicting types for built-in function `sin' configure:7903: $? = 0 configure:7906: test -s conftest configure:7909: $? = 0 configure:7920: result: yes configure:7934: checking for dlfcn.h configure:7969: result: yes configure:7979: checking for dlopen configure:8016: gcc -o conftest -g -O2 conftest.c -lm -lnsl >&5 /tmp/cc8WEQ3p.o: In function `main': /home/atg/source/squeak/bld/configure:8007: undefined reference to `dlopen' collect2: ld returned 1 exit status configure:8019: $? = 1 configure: failed program was: #line 7985 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char dlopen (); below. */ #include <assert.h> /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); char (*f) ();
int main () { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_dlopen) || defined (__stub___dlopen) choke me #else f = dlopen; #endif
; return 0; } configure:8035: result: no configure:8045: checking for dlopen in -ldl configure:8072: gcc -o conftest -g -O2 conftest.c -ldl -lm -lnsl >&5 configure:8075: $? = 0 configure:8078: test -s conftest configure:8081: $? = 0 configure:8092: result: yes configure:8176: checking for snprintf configure:8213: gcc -o conftest -g -O2 conftest.c -ldl -lm -lnsl >&5 configure:8216: $? = 0 configure:8219: test -s conftest configure:8222: $? = 0 configure:8232: result: yes configure:8248: checking for sys/types.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for sys/stat.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for stdlib.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for string.h configure:8279: result: yes configure:8248: checking for memory.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for strings.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for inttypes.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for stdint.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for unistd.h configure:8279: result: yes configure:8292: checking for stdlib.h configure:8327: result: yes configure:8292: checking for unistd.h configure:8327: result: yes configure:8340: checking for getpagesize configure:8377: gcc -o conftest -g -O2 conftest.c -ldl -lm -lnsl >&5 configure:8380: $? = 0 configure:8383: test -s conftest configure:8386: $? = 0 configure:8396: result: yes configure:8406: checking for working mmap configure:8542: gcc -o conftest -g -O2 conftest.c -ldl -lm -lnsl >&5 configure:8545: $? = 0 configure:8547: ./conftest configure:8550: $? = 0 configure:8562: result: yes configure:8582: checking for i686 optimization flags configure:8600: result: "-fomit-frame-pointer" configure:8609: checking for mawk configure:8635: result: no configure:8609: checking for gawk configure:8624: found /usr/bin/gawk configure:8632: result: gawk configure:8642: checking whether we can gnuify interp.c configure:8660: result: yes configure:8669: checking for prefix to use for loadable modules configure:8680: result: (none) configure:8687: checking for compiler flags to force 32-bit addresses configure:8695: result: configure:8700: checking whether byte ordering is bigendian configure:8725: gcc -c -g -O2 -fomit-frame-pointer conftest.c >&5 configure:8728: $? = 0 configure:8731: test -s conftest.o configure:8734: $? = 0 configure:8755: gcc -c -g -O2 -fomit-frame-pointer conftest.c >&5 configure: In function `main': configure:8746: `not' undeclared (first use in this function) configure:8746: (Each undeclared identifier is reported only once configure:8746: for each function it appears in.) configure:8746: parse error before "big" configure:8758: $? = 1 configure: failed program was: #line 8738 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h>
int main () { #if BYTE_ORDER != BIG_ENDIAN not big endian #endif
; return 0; } configure:8822: result: no configure:8835: checking whether misaligned access to doubles is ok configure:8852: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure: In function `main': configure:8848: warning: passing arg 1 of `f' makes integer from pointer without a cast configure:8855: $? = 0 configure:8857: ./conftest configure:8860: $? = 0 configure:8872: result: yes configure:8878: checking whether doubles are stored in Squeak order configure:8899: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure: In function `main': configure:8892: warning: no semicolon at end of struct or union configure:8892: parse error before "sizeof" configure: At top level: configure:8892: warning: data definition has no type or storage class configure:8893: parse error before '.' token configure:8902: $? = 1 configure: program exited with status 1 configure: failed program was: #line 8889 "configure" #include "confdefs.h" main() { union { double d; int i sizeof(double) / sizeof(int) ; } d; d.d = 1.0; return d.i0 == 0; } configure:8919: result: no configure:9074: result: ******** disabling vm-display-Quartz configure:9106: checking for X configure:9315: result: libraries /usr/X11R6/lib, headers /usr/X11R6/include configure:9454: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl -L/usr/X11R6/lib -lX11 >&5 configure:9457: $? = 0 configure:9460: test -s conftest configure:9463: $? = 0 configure:9589: checking for gethostbyname configure:9626: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure:9629: $? = 0 configure:9632: test -s conftest configure:9635: $? = 0 configure:9645: result: yes configure:9766: checking for connect configure:9803: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure:9806: $? = 0 configure:9809: test -s conftest configure:9812: $? = 0 configure:9822: result: yes configure:9882: checking for remove configure:9919: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure:9922: $? = 0 configure:9925: test -s conftest configure:9928: $? = 0 configure:9938: result: yes configure:9998: checking for shmat configure:10035: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure:10038: $? = 0 configure:10041: test -s conftest configure:10044: $? = 0 configure:10054: result: yes configure:10123: checking for IceConnectionNumber in -lICE configure:10150: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -L/usr/X11R6/lib conftest.c -lICE -ldl -lm -lnsl >&5 configure:10153: $? = 0 configure:10156: test -s conftest configure:10159: $? = 0 configure:10170: result: yes configure:10189: checking for XOpenDisplay in -lX11 configure:10216: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -I/usr/X11R6/include conftest.c -lX11 -lSM -lICE -L/usr/X11R6/lib -ldl -lm -lnsl >&5 configure:10219: $? = 0 configure:10222: test -s conftest configure:10225: $? = 0 configure:10236: result: yes configure:10246: checking for XShmAttach in -lXext configure:10273: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -I/usr/X11R6/include conftest.c -lXext -lSM -lICE -L/usr/X11R6/lib -ldl -lm -lnsl -lX11 >&5 configure:10276: $? = 0 configure:10279: test -s conftest configure:10282: $? = 0 configure:10293: result: yes configure:10309: checking for GL/gl.h configure:10319: gcc -E -I/usr/X11R6/include conftest.c configure:10325: $? = 0 configure:10344: result: yes configure:10356: checking for glIsEnabled in -lGL configure:10383: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -I/usr/X11R6/include conftest.c -lGL -lXext -lSM -lICE -L/usr/X11R6/lib -ldl -lm -lnsl -lX11 >&5 configure:10386: $? = 0 configure:10389: test -s conftest configure:10392: $? = 0 configure:10403: result: yes configure:10456: checking for Mac OS X CoreAudio configure:10471: gcc -c -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c >&5 configure:10460:33: CoreAudio/CoreAudio.h: No such file or directory configure: In function `main': configure:10464: `kAudioHardwareNoError' undeclared (first use in this function) configure:10464: (Each undeclared identifier is reported only once configure:10464: for each function it appears in.) configure:10474: $? = 1 configure: failed program was: #line 10459 "configure" #include "confdefs.h" #include <CoreAudio/CoreAudio.h> int main () { kAudioHardwareNoError; ; return 0; } configure:10490: result: no configure:10493: result: ******** disabling vm-sound-MacOSX configure:10511: checking for Network Audio System configure:10526: gcc -c -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c >&5 configure:10515:25: audio/audio.h: No such file or directory configure: In function `main': configure:10519: `AuElementNotifyKindLowWater' undeclared (first use in this function) configure:10519: (Each undeclared identifier is reported only once configure:10519: for each function it appears in.) configure:10529: $? = 1 configure: failed program was: #line 10514 "configure" #include "confdefs.h" #include <audio/audio.h> int main () { AuElementNotifyKindLowWater; ; return 0; } configure:10545: result: no configure:10548: result: ******** disabling vm-sound-NAS configure:10566: checking for Open Sound System configure:10581: gcc -c -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c >&5 configure:10584: $? = 0 configure:10587: test -s conftest.o configure:10590: $? = 0 configure:10593: result: yes configure:10621: checking for SunOS/Solaris audio configure:10636: gcc -c -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c >&5 configure:10625:25: sys/audioio.h: No such file or directory configure: In function `main': configure:10629: `AUDIO_SUNVTS' undeclared (first use in this function) configure:10629: (Each undeclared identifier is reported only once configure:10629: for each function it appears in.) configure:10639: $? = 1 configure: failed program was: #line 10624 "configure" #include "confdefs.h" #include <sys/audioio.h> int main () { AUDIO_SUNVTS; ; return 0; } configure:10671: gcc -c -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c >&5 configure:10660:25: sun/audioio.h: No such file or directory configure: In function `main': configure:10664: `AUDIO_SUNVTS' undeclared (first use in this function) configure:10664: (Each undeclared identifier is reported only once configure:10664: for each function it appears in.) configure:10674: $? = 1 configure: failed program was: #line 10659 "configure" #include "confdefs.h" #include <sun/audioio.h> int main () { AUDIO_SUNVTS; ; return 0; } configure:10693: result: no configure:10696: result: ******** disabling vm-sound-Sun configure:10719: checking for iconv.h configure:10729: gcc -E conftest.c configure:10735: $? = 0 configure:10754: result: yes configure:10764: checking for iconv_open in -liconv configure:10791: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -liconv -ldl -lm -lnsl >&5 /usr/bin/ld: cannot find -liconv collect2: ld returned 1 exit status configure:10794: $? = 1 configure: failed program was: #line 10772 "configure" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char iconv_open (); int main () { iconv_open (); ; return 0; } configure:10811: result: no configure:10817: checking for libiconv_open in -liconv configure:10844: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -liconv -ldl -lm -lnsl >&5 /usr/bin/ld: cannot find -liconv collect2: ld returned 1 exit status configure:10847: $? = 1 configure: failed program was: #line 10825 "configure" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char libiconv_open (); int main () { libiconv_open (); ; return 0; } configure:10864: result: no configure:10878: checking for nl_langinfo and CODESET configure:10896: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure:10899: $? = 0 configure:10902: test -s conftest configure:10905: $? = 0 configure:10916: result: yes configure:10989: checking for Objective C support configure:10998: result: no configure:11001: result: ******** disabling ObjectiveCPlugin configure:11020: checking for util.h configure:11030: gcc -E conftest.c configure:11027:18: util.h: No such file or directory configure:11036: $? = 1 configure: failed program was: #line 11026 "configure" #include "confdefs.h" #include <util.h> configure:11055: result: no configure:11020: checking for libutil.h configure:11030: gcc -E conftest.c configure:11027:21: libutil.h: No such file or directory configure:11036: $? = 1 configure: failed program was: #line 11026 "configure" #include "confdefs.h" #include <libutil.h> configure:11055: result: no configure:11020: checking for pty.h configure:11030: gcc -E conftest.c configure:11036: $? = 0 configure:11055: result: yes configure:11020: checking for stropts.h configure:11030: gcc -E conftest.c configure:11036: $? = 0 configure:11055: result: yes configure:11065: checking for library containing openpty configure:11092: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 /tmp/ccEc3uET.o: In function `main': /home/atg/source/squeak/bld/configure:11085: undefined reference to `openpty' collect2: ld returned 1 exit status configure:11095: $? = 1 configure: failed program was: #line 11073 "configure" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char openpty (); int main () { openpty (); ; return 0; } configure:11132: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -lutil -ldl -lm -lnsl >&5 configure:11135: $? = 0 configure:11138: test -s conftest configure:11141: $? = 0 configure:11154: result: -lutil configure:11243: checking for FFI support configure:11251: result: x86-sysv configure:11379: checking for XOpenDisplay in -lX11 configure:11426: result: yes configure:11548: creating ./config.status
## ----------------------- ## ## Running config.status. ## ## ----------------------- ##
This file was extended by config.status 2.52, executed with CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS =
./config.status
on AlonzoGC
config.status:12074: creating mkconfig config.status:12074: creating make.cfg config.status:12074: creating make.int config.status:12074: creating make.ext config.status:12074: creating make.prg config.status:12074: creating inisqueak config.status:12074: creating Makefile config.status:12166: creating config.h
## ----------------- ## ## Cache variables. ## ## ----------------- ##
ac_cv_atexit=atexit ac_cv_build=i686-pc-linux-gnu ac_cv_build_alias=i686-pc-linux-gnu ac_cv_c_bigendian=no ac_cv_c_compiler_gnu=yes ac_cv_double_align=yes ac_cv_double_order=no ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_func_connect=yes ac_cv_func_dlopen=no ac_cv_func_gethostbyname=yes ac_cv_func_getpagesize=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_remove=yes ac_cv_func_shmat=yes ac_cv_func_snprintf=yes ac_cv_gethostname_p=yes ac_cv_have_x=$'have_x=yes \t\tac_x_includes=/usr/X11R6/include ac_x_libraries=/usr/X11R6/lib' ac_cv_header_GL_gl_h=yes ac_cv_header_dirent_dirent_h=yes ac_cv_header_dlfcn_h=yes ac_cv_header_fcntl_h=yes ac_cv_header_iconv_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_libutil_h=no ac_cv_header_memory_h=yes ac_cv_header_pty_h=yes ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_stropts_h=yes ac_cv_header_sys_file_h=yes ac_cv_header_sys_filio_h=no ac_cv_header_sys_param_h=yes ac_cv_header_sys_select_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_time_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_time=yes ac_cv_header_unistd_h=yes ac_cv_header_util_h=no ac_cv_host=i686-pc-linux-gnu ac_cv_host_alias=i686-pc-linux-gnu ac_cv_iconv=no ac_cv_int64_t=$'long long' ac_cv_langinfo_codeset=yes ac_cv_lib_GL_glIsEnabled=yes ac_cv_lib_ICE_IceConnectionNumber=yes ac_cv_lib_X11_XOpenDisplay=yes ac_cv_lib_Xext_XShmAttach=yes ac_cv_lib_dir_opendir=no ac_cv_lib_dl_dlopen=yes ac_cv_lib_iconv_iconv_open=no ac_cv_lib_iconv_libiconv_open=no ac_cv_lib_m_sin=yes ac_cv_lib_nsl_yp_bind=yes ac_cv_lib_socket_socket=no ac_cv_member_struct_tm_tm_zone=yes ac_cv_module_prefix=$'(none)' ac_cv_objext=o ac_cv_path_install=$'/usr/bin/ginstall -c' ac_cv_prog_AS=as ac_cv_prog_AWK=gawk ac_cv_prog_CPP=$'gcc -E' ac_cv_prog_LN=ln ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_ac_ct_STRIP=strip ac_cv_prog_cc_g=yes ac_cv_prog_make_make_set=yes ac_cv_search_openpty=-lutil ac_cv_socklen_t=yes ac_cv_struct_tm=time.h ac_cv_timezone=yes ac_cv_tm_gmtoff=yes ac_cv_tzset=yes lt_cv_archive_cmds_need_lc=no lt_cv_compiler_c_o=yes lt_cv_compiler_o_lo=yes lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd=$'$MAGIC_CMD' lt_cv_file_magic_test_file=$'/lib/libc.so.6 /lib/libc-2.3.1.so' lt_cv_global_symbol_to_c_name_address=$'sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'' lt_cv_global_symbol_to_cdecl=$'sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'' lt_cv_ld_reload_flag=-r lt_cv_path_LD=/usr/bin/ld lt_cv_path_NM=$'/usr/bin/nm -B' lt_cv_path_SED=/usr/bin/sed lt_cv_prog_cc_can_build_shared=yes lt_cv_prog_cc_no_builtin= lt_cv_prog_cc_pic=$' -fPIC' lt_cv_prog_cc_pic_works=yes lt_cv_prog_cc_shlib= lt_cv_prog_cc_static=-static lt_cv_prog_cc_static_works=yes lt_cv_prog_cc_wl=-Wl, lt_cv_prog_gnu_ld=yes lt_cv_sys_global_symbol_pipe=$'sed -n -e 's/^.*[ \t]\([ABCDGISTW][ABCDGISTW]*\)[ \t][ \t]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'' lt_cv_sys_path_separator=:
## ------------ ## ## confdefs.h. ## ## ------------ ##
#define SQ_VERSION "3.2t-369" #define VM_VERSION "3.5-1devel" #define OS_TYPE "unix" #define VM_HOST "i686-pc-linux-gnu" #define VM_HOST_OS "linux-gnu" #define VM_HOST_CPU "i686" #define squeakInt64 long long #define HAVE_DLFCN_H 1 #define STDC_HEADERS 1 #define HAVE_UNISTD_H 1 #define HAVE_STRING_H 1 #define HAVE_FCNTL_H 1 #define HAVE_SYS_FILE_H 1 #define HAVE_SYS_PARAM_H 1 #define HAVE_SYS_TIME_H 1 #define HAVE_SYS_SELECT_H 1 #define TIME_WITH_SYS_TIME 1 #define HAVE_DIRENT_H 1 #define HAVE_STRUCT_TM_TM_ZONE 1 #define HAVE_TM_ZONE 1 #define AT_EXIT atexit #define HAVE_TZSET 1 #define HAVE_TM_GMTOFF 1 #define HAVE_TIMEZONE 1 #define HAVE_LIBNSL 1 #define HAVE_LIBM 1 #define HAVE_DLFCN_H 1 #define HAVE_LIBDL 1 #define HAVE_SNPRINTF 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_STDLIB_H 1 #define HAVE_UNISTD_H 1 #define HAVE_GETPAGESIZE 1 #define HAVE_MMAP 1 #define VM_MODULE_PREFIX "" #define DOUBLE_WORD_ORDER 1 #define SQ_LIBDIR "/usr/local/lib/squeak/3.2t-369" #define VM_LIBDIR "/usr/local/lib/squeak/3.5-1devel" #define USE_X11 1 #define HAVE_LIBXEXT 1 #define HAVE_GL_GL_H 1 #define USE_X11_GLX 1 #define HAVE_LIBGL 1 #define HAVE_ICONV_H 1 #define HAVE_LANGINFO_CODESET 1 #define HAVE_PTY_H 1 #define HAVE_STROPTS_H 1 #define HAVE_OPENPTY 1
configure: exit 0
On Saturday 02 August 2003 09:32 am, Alan Grimes wrote:
It is possible that I had made some misguided change to the VM source in my immage that is now coming back to haunt me... Is anyone else getting this problem?
First, you should use a recent image (that is, a 3.6 image).
Second, you should be loading the Balloon3D package from SqueakMap to get the VM source.
The recently-generated source for the file you mention on my system includes:
/*** Constants ***/ #define MaterialSize 17 #define PrimLightSize 32 #define PrimTypeMax 6 #define PrimVertexSize 16
"Andreas Raab" andreas.raab@gmx.de wrote:
Second, you should be loading the Balloon3D package from SqueakMap to get the VM source.
Which, I should mention, I am just updating again in order to fold back a few modifications from Croquet. Nothing that affects the plugin sides, though.
A thought that _would_ affect the plugin side; should we separate out the B3D(etc) plugins from the image B3D code? The separate plugins parts could then be associated with VMMaker via a loadscript. I suspect this might reduce confusion for some people when they attempt to make a VM.
tim -- Tim Rowledge, tim@sumeru.stanford.edu, http://sumeru.stanford.edu/tim 99 percent of lawyers give the rest a bad name.
Hi Tim,
A thought that _would_ affect the plugin side; should we separate out the B3D(etc) plugins from the image B3D code? The separate plugins parts could then be associated with VMMaker via a loadscript. I suspect this might reduce confusion for some people when they attempt to make a VM.
Well, I looked into the possibility when I made up 1.0.1 and decided not to do it at this point. Reasons were mostly that it would require a three-way split (e.g., B3DConstants, B3DPlugins, and B3DRuntime) which is right now not really feasable to manage for me given that SM1.1 still isn't there (aka: no version tracking) and that the DVS vs. Monticello problems aren't satisfactory solved in my understanding. In short, it would be too much work having to track three independent packages all of which depend (in one way or another) on one another. So right now you get the entire enchilada. I understand that this isn't satisfactory for a number of people but I have to manage the amount of effort I want to put into maintaining the package(s) and the way it is right now is just the simplest solution for me.
Cheers, - Andreas
Hi Alan,
I just built the plugin with the Ian's 3.4.1 sources and VMMaker in a 5373 image with no problems. See if you can do it using a non-hacked image.
Croquet makes fairly extensive use of the stencil buffer. Although it looks like MesaGL has stencil buffer support, even if it does work, performance will be much lousier than if you have a hardware stencil buffer.
Have you tried the binary Bert made available at: http://isgwww.cs.uni-magdeburg.de/~bert/croquet/
Good luck, Joshua
On Sat, Aug 02, 2003 at 12:32:52PM -0400, Alan Grimes wrote:
om,
Excited that I might finally get a version of squeak's 3D system that doesn't crash by the recient list trafic, I did the following:
did "cvs update" in blahblahblah/squeak
loaded my experamental immage (one that I keep in
blahblahblah/squeak/experamental that is mostly clean and used only for VM hacking and then retrieved all code updates from both the update server and squeak map...
Cleaned out blahblahblah/squeak/src and re-generated the VM source.
cleaned out the build directory and ran configure.
Since I'm running on a multiprocessor machine I first ran " make -j 2 " It errored out..
Below is the result of the second run of a normal make:
It is possible that I had made some misguided change to the VM source in my immage that is now coming back to haunt me... Is anyone else getting this problem?
Can you suggest any tests I should run with my experamental immage?
blahblahblah/configure --disable-B3DAcceleratorPlugin doesn't have any effect.
Attached is the configure log
Also of note: Due to hardware problems I have had to revert to the second oldest PCI video card in my vast collection... OpenGL support is through MesaGL.
////////////////////////////////////////////////////////////////////////////////////////////////////////// atg@AlonzoGC:~/source/squeak/bld> make make[1]: `vm.a' is up to date. make[1]: `ADPCMCodecPlugin.a' is up to date. make[1]: `AsynchFilePlugin.a' is up to date. gcc -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -Wall -Wno-unknown-pragmas -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -I/home/atg/source/squeak/bld -I/home/atg/source/squeak/platforms/unix/vm -I/home/atg/source/squeak/platforms/Cross/vm -I/usr/X11R6/include -DHAVE_CONFIG_H -DSQUEAK_BUILTIN_PLUGIN -I/home/atg/source/squeak/bld -I/home/atg/source/squeak/platforms/unix/vm -I/home/atg/source/squeak/platforms/Cross/vm -I/home/atg/source/squeak/platforms/Cross/plugins/B3DAcceleratorPlugin -I/home/atg/source/squeak/platforms/unix/plugins/B3DAcceleratorPlugin -c -o B3DAcceleratorPlugin.o /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `halt': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:130: warning: control reaches end of non-void function /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `msg': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:138: warning: control reaches end of non-void function /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `primitiveRenderVertexBuffer': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:536: `PrimTypeMax' undeclared (first use in this function) /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:536: (Each undeclared identifier is reported only once /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:536: for each function it appears in.) /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `stackLightArrayValue': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:949: `PrimLightSize' undeclared (first use in this function) /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `stackMaterialValue': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:969: `MaterialSize' undeclared (first use in this function) /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `stackPrimitiveVertex': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:1041: `PrimVertexSize' undeclared (first use in this function) /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c: In function `stackPrimitiveVertexArrayofSize': /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:1061: `PrimVertexSize' undeclared (first use in this function) /usr/include/bits/string2.h: At top level: /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:111: warning: `fetchLightSourceofObject' defined but not used /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:128: warning: `halt' defined but not used /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:136: warning: `msg' defined but not used /home/atg/source/squeak/src/vm/intplugins/B3DAcceleratorPlugin/B3DAcceleratorPlugin.c:1034: warning: `stackPrimitiveVertex' defined but not used make[1]: *** [B3DAcceleratorPlugin.o] Error 1 make: *** [B3DAcceleratorPlugin/B3DAcceleratorPlugin.a] Error 2 atg@AlonzoGC:~/source/squeak/bld>
This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was generated by GNU Autoconf 2.52. Invocation command line was
$ ../platforms/unix/config/configure --disable-B3DAccelerator
## ---------- ## ## Platform. ## ## ---------- ##
hostname = AlonzoGC uname -m = i686 uname -r = 2.4.21 uname -s = Linux uname -v = #4 SMP Fri Jun 27 16:23:46 EDT 2003
/usr/bin/uname -p = unknown /bin/uname -X = unknown
/bin/arch = i686 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown
PATH = /usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/usr/lib/java/bin:/opt/gnome/bin
## ------------ ## ## Core tests. ## ## ------------ ##
configure:1133: PATH=".;."; conftest.sh ../platforms/unix/config/configure: conftest.sh: command not found configure:1136: $? = 127 configure:1165: checking sanity of VMMaker src directory configure:1183: result: okay configure:1241: checking build system type configure:1259: result: i686-pc-linux-gnu configure:1269: checking host system type configure:1283: result: i686-pc-linux-gnu configure:1333: checking whether make sets ${MAKE} configure:1353: result: yes configure:1405: checking for gcc configure:1420: found /usr/bin/gcc configure:1428: result: gcc configure:1656: checking for C compiler version configure:1659: gcc --version </dev/null >&5 gcc (GCC) 3.2.2 Copyright (C) 2002 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:1662: $? = 0 configure:1664: gcc -v </dev/null >&5 Reading specs from /usr/lib/gcc-lib/athlon-pc-linux-gnu/3.2.2/specs Configured with: ../gcc-3.2.2/configure --prefix=/usr --host=athlon-pc-linux-gnu Thread model: posix gcc version 3.2.2 configure:1667: $? = 0 configure:1669: gcc -V </dev/null >&5 gcc: argument to `-V' is missing configure:1672: $? = 1 configure:1692: checking for C compiler default output configure:1695: gcc conftest.c >&5 configure:1698: $? = 0 configure:1727: result: a.out configure:1732: checking whether the C compiler works configure:1738: ./a.out configure:1741: $? = 0 configure:1756: result: yes configure:1763: checking whether we are cross compiling configure:1765: result: no configure:1768: checking for executable suffix configure:1770: gcc -o conftest conftest.c >&5 configure:1773: $? = 0 configure:1795: result: configure:1801: checking for object suffix configure:1819: gcc -c conftest.c >&5 configure:1822: $? = 0 configure:1841: result: o configure:1845: checking whether we are using the GNU C compiler configure:1866: gcc -c conftest.c >&5 configure:1869: $? = 0 configure:1872: test -s conftest.o configure:1875: $? = 0 configure:1887: result: yes configure:1893: checking whether gcc accepts -g configure:1911: gcc -c -g conftest.c >&5 configure:1914: $? = 0 configure:1917: test -s conftest.o configure:1920: $? = 0 configure:1930: result: yes configure:1957: gcc -c -g -O2 conftest.c >&5 conftest.c:2: parse error before "me" configure:1960: $? = 1 configure: failed program was: #ifndef __cplusplus choke me #endif configure:2062: checking for as configure:2077: found /usr/bin/as configure:2085: result: as configure:2092: checking for GNU as configure:2101: result: yes configure:2141: checking for ranlib configure:2156: found /usr/local/bin/ranlib configure:2165: result: ranlib configure:2189: checking for a BSD compatible install configure:2238: result: /usr/bin/ginstall -c configure:2260: checking for BSD-compatible nm configure:2296: result: /usr/bin/nm -B configure:2301: checking for ln configure:2316: found /bin/ln configure:2324: result: ln configure:2333: checking "size of int" configure:2347: gcc -o conftest -g -O2 conftest.c >&5 configure:2350: $? = 0 configure:2352: ./conftest configure:2355: $? = 0 configure:2357: result: "okay" configure:2372: checking "size of time_t" configure:2386: gcc -o conftest -g -O2 conftest.c >&5 configure:2389: $? = 0 configure:2391: ./conftest configure:2394: $? = 0 configure:2396: result: "okay" configure:2411: checking "size of double" configure:2425: gcc -o conftest -g -O2 conftest.c >&5 configure:2428: $? = 0 configure:2430: ./conftest configure:2433: $? = 0 configure:2435: result: "okay" configure:2450: checking for 64-bit integer type configure:2466: gcc -o conftest -g -O2 conftest.c >&5 configure:2469: $? = 0 configure:2471: ./conftest configure:2474: $? = 1 configure: program exited with status 1 configure: failed program was: #line 2461 "configure" #include "confdefs.h" int main(){return(sizeof(long) == 8)?0:1;} configure:2492: gcc -o conftest -g -O2 conftest.c >&5 configure:2495: $? = 0 configure:2497: ./conftest configure:2500: $? = 0 configure:2515: result: long long configure:2606: checking for ld used by GCC configure:2669: result: /usr/bin/ld configure:2678: checking if the linker (/usr/bin/ld) is GNU ld GNU ld version 2.13.2.1 configure:2690: result: yes configure:2694: checking for /usr/bin/ld option to reload object files configure:2701: result: -r configure:2706: checking for a sed that does not truncate output configure:2788: result: /usr/bin/sed configure:2791: checking whether ln -s works configure:2795: result: yes configure:2802: checking how to recognise dependent libraries configure:2983: result: pass_all configure:2989: checking command to parse /usr/bin/nm -B output configure:3073: gcc -c -g -O2 conftest.c >&5 configure:3076: $? = 0 configure:3080: /usr/bin/nm -B conftest.o | sed -n -e 's/^.*[ ]([ABCDGISTW][ABCDGISTW]*)[ ][ ]*()([_A-Za-z][_A-Za-z0-9]*)$/\1 \2\3 \3/p' > conftest.nm configure:3083: $? = 0 configure:3135: gcc -o conftest -g -O2 conftest.c conftstm.o >&5 configure:3138: $? = 0 configure:3182: result: ok configure:3191: checking how to run the C preprocessor configure:3217: gcc -E conftest.c configure:3223: $? = 0 configure:3250: gcc -E conftest.c configure:3247:28: ac_nonexistent.h: No such file or directory configure:3256: $? = 1 configure: failed program was: #line 3246 "configure" #include "confdefs.h" #include <ac_nonexistent.h> configure:3293: result: gcc -E configure:3308: gcc -E conftest.c configure:3314: $? = 0 configure:3341: gcc -E conftest.c configure:3338:28: ac_nonexistent.h: No such file or directory configure:3347: $? = 1 configure: failed program was: #line 3337 "configure" #include "confdefs.h" #include <ac_nonexistent.h> configure:3389: checking for dlfcn.h configure:3399: gcc -E conftest.c configure:3405: $? = 0 configure:3424: result: yes configure:3611: checking for ranlib configure:3635: result: ranlib configure:3685: checking for strip configure:3700: found /usr/bin/strip configure:3709: result: strip configure:3911: checking for objdir configure:3922: result: .libs configure:3937: checking for gcc option to produce PIC configure:4083: result: -fPIC configure:4087: checking if gcc PIC flag -fPIC works configure:4107: gcc -c -g -O2 -fPIC -DPIC conftest.c >&5 configure:4110: $? = 0 configure:4113: test -s conftest.o configure:4116: $? = 0 configure:4152: result: yes configure:4168: checking if gcc static flag -static works configure:4189: gcc -o conftest -g -O2 -static conftest.c >&5 configure:4192: $? = 0 configure:4195: test -s conftest configure:4198: $? = 0 configure:4212: result: yes configure:4223: checking if gcc supports -c -o file.o configure:4243: gcc -c -g -O2 -o out/conftest2.o conftest.c >&5 configure:4267: result: yes configure:4272: checking if gcc supports -c -o file.lo configure:4296: gcc -c -g -O2 -c -o conftest.lo conftest.c >&5 configure:4299: $? = 0 configure:4302: test -s conftest.lo configure:4305: $? = 0 configure:4326: result: yes configure:4357: checking if gcc supports -fno-rtti -fno-exceptions configure:4376: gcc -c -g -O2 -fno-rtti -fno-exceptions -c conftest.c conftest.c >&5 configure:4379: $? = 0 configure:4382: test -s conftest.o configure:4385: $? = 0 configure:4401: result: yes configure:4412: checking whether the linker (/usr/bin/ld) supports shared libraries configure:5107: result: yes configure:5112: checking how to hardcode library paths into programs configure:5136: result: immediate configure:5141: checking whether stripping libraries is possible configure:5146: result: yes configure:5157: checking dynamic linker characteristics configure:5564: result: GNU/Linux ld.so configure:5569: checking if libtool supports shared libraries configure:5571: result: yes configure:5574: checking whether to build shared libraries configure:5595: result: yes configure:5598: checking whether to build static libraries configure:5602: result: no configure:6220: checking whether -lc should be explicitly linked in configure:6228: gcc -c -g -O2 conftest.c >&5 configure:6231: $? = 0 configure:6245: gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2>&1 | grep -lc >/dev/null 2>&1 configure:6248: $? = 0 configure:6261: result: no configure:6842: checking for ANSI C header files configure:6856: gcc -E conftest.c configure:6862: $? = 0 configure:6949: gcc -o conftest -g -O2 conftest.c >&5 configure:6952: $? = 0 configure:6954: ./conftest configure:6957: $? = 0 configure:6970: result: yes configure:6983: checking for unistd.h configure:6993: gcc -E conftest.c configure:6999: $? = 0 configure:7018: result: yes configure:6983: checking for string.h configure:6993: gcc -E conftest.c configure:6999: $? = 0 configure:7018: result: yes configure:6983: checking for fcntl.h configure:6993: gcc -E conftest.c configure:6999: $? = 0 configure:7018: result: yes configure:6983: checking for sys/file.h configure:6993: gcc -E conftest.c configure:6999: $? = 0 configure:7018: result: yes configure:6983: checking for sys/param.h configure:6993: gcc -E conftest.c configure:6999: $? = 0 configure:7018: result: yes configure:7031: checking for sys/time.h configure:7041: gcc -E conftest.c configure:7047: $? = 0 configure:7066: result: yes configure:7031: checking for sys/filio.h configure:7041: gcc -E conftest.c configure:7038:23: sys/filio.h: No such file or directory configure:7047: $? = 1 configure: failed program was: #line 7037 "configure" #include "confdefs.h" #include <sys/filio.h> configure:7066: result: no configure:7031: checking for sys/select.h configure:7041: gcc -E conftest.c configure:7047: $? = 0 configure:7066: result: yes configure:7076: checking whether time.h and sys/time.h may both be included configure:7098: gcc -c -g -O2 conftest.c >&5 configure:7101: $? = 0 configure:7104: test -s conftest.o configure:7107: $? = 0 configure:7117: result: yes configure:7130: checking for dirent.h that defines DIR configure:7151: gcc -c -g -O2 conftest.c >&5 configure:7154: $? = 0 configure:7157: test -s conftest.o configure:7160: $? = 0 configure:7170: result: yes configure:7183: checking for opendir in -ldir configure:7210: gcc -o conftest -g -O2 conftest.c -ldir >&5 /usr/bin/ld: cannot find -ldir collect2: ld returned 1 exit status configure:7213: $? = 1 configure: failed program was: #line 7191 "configure" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char opendir (); int main () { opendir (); ; return 0; } configure:7230: result: no configure:7292: checking whether struct tm is in sys/time.h or time.h configure:7312: gcc -c -g -O2 conftest.c >&5 configure:7315: $? = 0 configure:7318: test -s conftest.o configure:7321: $? = 0 configure:7331: result: time.h configure:7341: checking for struct tm.tm_zone configure:7363: gcc -c -g -O2 conftest.c >&5 configure:7366: $? = 0 configure:7369: test -s conftest.o configure:7372: $? = 0 configure:7382: result: yes configure:7451: checking for socklen_t in sys/socket.h configure:7469: gcc -c -g -O2 conftest.c >&5 configure:7472: $? = 0 configure:7475: test -s conftest.o configure:7478: $? = 0 configure:7488: result: yes configure:7494: checking for atexit or on_exit configure:7512: gcc -c -g -O2 conftest.c >&5 configure:7515: $? = 0 configure:7518: test -s conftest.o configure:7521: $? = 0 configure:7561: result: atexit configure:7569: checking for tzset configure:7587: gcc -c -g -O2 conftest.c >&5 configure:7590: $? = 0 configure:7593: test -s conftest.o configure:7596: $? = 0 configure:7606: result: yes configure:7612: checking for gmtoff in struct tm configure:7630: gcc -c -g -O2 conftest.c >&5 configure:7633: $? = 0 configure:7636: test -s conftest.o configure:7639: $? = 0 configure:7649: result: yes configure:7655: checking for timezone and daylight variables configure:7673: gcc -c -g -O2 conftest.c >&5 configure:7676: $? = 0 configure:7679: test -s conftest.o configure:7682: $? = 0 configure:7692: result: yes configure:7698: checking for gethostname in unistd.h configure:7716: gcc -c -g -O2 conftest.c >&5 configure:7719: $? = 0 configure:7722: test -s conftest.o configure:7725: $? = 0 configure:7735: result: yes configure:7757: checking for yp_bind in -lnsl configure:7784: gcc -o conftest -g -O2 conftest.c -lnsl >&5 configure:7787: $? = 0 configure:7790: test -s conftest configure:7793: $? = 0 configure:7804: result: yes configure:7815: checking for socket in -lsocket configure:7842: gcc -o conftest -g -O2 conftest.c -lsocket -lnsl >&5 /usr/bin/ld: cannot find -lsocket collect2: ld returned 1 exit status configure:7845: $? = 1 configure: failed program was: #line 7823 "configure" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char socket (); int main () { socket (); ; return 0; } configure:7862: result: no configure:7873: checking for sin in -lm configure:7900: gcc -o conftest -g -O2 conftest.c -lm -lnsl >&5 configure:7889: warning: conflicting types for built-in function `sin' configure:7903: $? = 0 configure:7906: test -s conftest configure:7909: $? = 0 configure:7920: result: yes configure:7934: checking for dlfcn.h configure:7969: result: yes configure:7979: checking for dlopen configure:8016: gcc -o conftest -g -O2 conftest.c -lm -lnsl >&5 /tmp/cc8WEQ3p.o: In function `main': /home/atg/source/squeak/bld/configure:8007: undefined reference to `dlopen' collect2: ld returned 1 exit status configure:8019: $? = 1 configure: failed program was: #line 7985 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char dlopen (); below. */ #include <assert.h> /* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen (); char (*f) ();
int main () { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_dlopen) || defined (__stub___dlopen) choke me #else f = dlopen; #endif
; return 0; } configure:8035: result: no configure:8045: checking for dlopen in -ldl configure:8072: gcc -o conftest -g -O2 conftest.c -ldl -lm -lnsl >&5 configure:8075: $? = 0 configure:8078: test -s conftest configure:8081: $? = 0 configure:8092: result: yes configure:8176: checking for snprintf configure:8213: gcc -o conftest -g -O2 conftest.c -ldl -lm -lnsl >&5 configure:8216: $? = 0 configure:8219: test -s conftest configure:8222: $? = 0 configure:8232: result: yes configure:8248: checking for sys/types.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for sys/stat.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for stdlib.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for string.h configure:8279: result: yes configure:8248: checking for memory.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for strings.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for inttypes.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for stdint.h configure:8260: gcc -c -g -O2 conftest.c >&5 configure:8263: $? = 0 configure:8266: test -s conftest.o configure:8269: $? = 0 configure:8279: result: yes configure:8248: checking for unistd.h configure:8279: result: yes configure:8292: checking for stdlib.h configure:8327: result: yes configure:8292: checking for unistd.h configure:8327: result: yes configure:8340: checking for getpagesize configure:8377: gcc -o conftest -g -O2 conftest.c -ldl -lm -lnsl >&5 configure:8380: $? = 0 configure:8383: test -s conftest configure:8386: $? = 0 configure:8396: result: yes configure:8406: checking for working mmap configure:8542: gcc -o conftest -g -O2 conftest.c -ldl -lm -lnsl >&5 configure:8545: $? = 0 configure:8547: ./conftest configure:8550: $? = 0 configure:8562: result: yes configure:8582: checking for i686 optimization flags configure:8600: result: "-fomit-frame-pointer" configure:8609: checking for mawk configure:8635: result: no configure:8609: checking for gawk configure:8624: found /usr/bin/gawk configure:8632: result: gawk configure:8642: checking whether we can gnuify interp.c configure:8660: result: yes configure:8669: checking for prefix to use for loadable modules configure:8680: result: (none) configure:8687: checking for compiler flags to force 32-bit addresses configure:8695: result: configure:8700: checking whether byte ordering is bigendian configure:8725: gcc -c -g -O2 -fomit-frame-pointer conftest.c >&5 configure:8728: $? = 0 configure:8731: test -s conftest.o configure:8734: $? = 0 configure:8755: gcc -c -g -O2 -fomit-frame-pointer conftest.c >&5 configure: In function `main': configure:8746: `not' undeclared (first use in this function) configure:8746: (Each undeclared identifier is reported only once configure:8746: for each function it appears in.) configure:8746: parse error before "big" configure:8758: $? = 1 configure: failed program was: #line 8738 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h>
int main () { #if BYTE_ORDER != BIG_ENDIAN not big endian #endif
; return 0; } configure:8822: result: no configure:8835: checking whether misaligned access to doubles is ok configure:8852: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure: In function `main': configure:8848: warning: passing arg 1 of `f' makes integer from pointer without a cast configure:8855: $? = 0 configure:8857: ./conftest configure:8860: $? = 0 configure:8872: result: yes configure:8878: checking whether doubles are stored in Squeak order configure:8899: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure: In function `main': configure:8892: warning: no semicolon at end of struct or union configure:8892: parse error before "sizeof" configure: At top level: configure:8892: warning: data definition has no type or storage class configure:8893: parse error before '.' token configure:8902: $? = 1 configure: program exited with status 1 configure: failed program was: #line 8889 "configure" #include "confdefs.h" main() { union { double d; int i sizeof(double) / sizeof(int) ; } d; d.d = 1.0; return d.i0 == 0; } configure:8919: result: no configure:9074: result: ******** disabling vm-display-Quartz configure:9106: checking for X configure:9315: result: libraries /usr/X11R6/lib, headers /usr/X11R6/include configure:9454: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl -L/usr/X11R6/lib -lX11 >&5 configure:9457: $? = 0 configure:9460: test -s conftest configure:9463: $? = 0 configure:9589: checking for gethostbyname configure:9626: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure:9629: $? = 0 configure:9632: test -s conftest configure:9635: $? = 0 configure:9645: result: yes configure:9766: checking for connect configure:9803: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure:9806: $? = 0 configure:9809: test -s conftest configure:9812: $? = 0 configure:9822: result: yes configure:9882: checking for remove configure:9919: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure:9922: $? = 0 configure:9925: test -s conftest configure:9928: $? = 0 configure:9938: result: yes configure:9998: checking for shmat configure:10035: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure:10038: $? = 0 configure:10041: test -s conftest configure:10044: $? = 0 configure:10054: result: yes configure:10123: checking for IceConnectionNumber in -lICE configure:10150: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -L/usr/X11R6/lib conftest.c -lICE -ldl -lm -lnsl >&5 configure:10153: $? = 0 configure:10156: test -s conftest configure:10159: $? = 0 configure:10170: result: yes configure:10189: checking for XOpenDisplay in -lX11 configure:10216: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -I/usr/X11R6/include conftest.c -lX11 -lSM -lICE -L/usr/X11R6/lib -ldl -lm -lnsl >&5 configure:10219: $? = 0 configure:10222: test -s conftest configure:10225: $? = 0 configure:10236: result: yes configure:10246: checking for XShmAttach in -lXext configure:10273: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -I/usr/X11R6/include conftest.c -lXext -lSM -lICE -L/usr/X11R6/lib -ldl -lm -lnsl -lX11 >&5 configure:10276: $? = 0 configure:10279: test -s conftest configure:10282: $? = 0 configure:10293: result: yes configure:10309: checking for GL/gl.h configure:10319: gcc -E -I/usr/X11R6/include conftest.c configure:10325: $? = 0 configure:10344: result: yes configure:10356: checking for glIsEnabled in -lGL configure:10383: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 -I/usr/X11R6/include conftest.c -lGL -lXext -lSM -lICE -L/usr/X11R6/lib -ldl -lm -lnsl -lX11 >&5 configure:10386: $? = 0 configure:10389: test -s conftest configure:10392: $? = 0 configure:10403: result: yes configure:10456: checking for Mac OS X CoreAudio configure:10471: gcc -c -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c >&5 configure:10460:33: CoreAudio/CoreAudio.h: No such file or directory configure: In function `main': configure:10464: `kAudioHardwareNoError' undeclared (first use in this function) configure:10464: (Each undeclared identifier is reported only once configure:10464: for each function it appears in.) configure:10474: $? = 1 configure: failed program was: #line 10459 "configure" #include "confdefs.h" #include <CoreAudio/CoreAudio.h> int main () { kAudioHardwareNoError; ; return 0; } configure:10490: result: no configure:10493: result: ******** disabling vm-sound-MacOSX configure:10511: checking for Network Audio System configure:10526: gcc -c -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c >&5 configure:10515:25: audio/audio.h: No such file or directory configure: In function `main': configure:10519: `AuElementNotifyKindLowWater' undeclared (first use in this function) configure:10519: (Each undeclared identifier is reported only once configure:10519: for each function it appears in.) configure:10529: $? = 1 configure: failed program was: #line 10514 "configure" #include "confdefs.h" #include <audio/audio.h> int main () { AuElementNotifyKindLowWater; ; return 0; } configure:10545: result: no configure:10548: result: ******** disabling vm-sound-NAS configure:10566: checking for Open Sound System configure:10581: gcc -c -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c >&5 configure:10584: $? = 0 configure:10587: test -s conftest.o configure:10590: $? = 0 configure:10593: result: yes configure:10621: checking for SunOS/Solaris audio configure:10636: gcc -c -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c >&5 configure:10625:25: sys/audioio.h: No such file or directory configure: In function `main': configure:10629: `AUDIO_SUNVTS' undeclared (first use in this function) configure:10629: (Each undeclared identifier is reported only once configure:10629: for each function it appears in.) configure:10639: $? = 1 configure: failed program was: #line 10624 "configure" #include "confdefs.h" #include <sys/audioio.h> int main () { AUDIO_SUNVTS; ; return 0; } configure:10671: gcc -c -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c >&5 configure:10660:25: sun/audioio.h: No such file or directory configure: In function `main': configure:10664: `AUDIO_SUNVTS' undeclared (first use in this function) configure:10664: (Each undeclared identifier is reported only once configure:10664: for each function it appears in.) configure:10674: $? = 1 configure: failed program was: #line 10659 "configure" #include "confdefs.h" #include <sun/audioio.h> int main () { AUDIO_SUNVTS; ; return 0; } configure:10693: result: no configure:10696: result: ******** disabling vm-sound-Sun configure:10719: checking for iconv.h configure:10729: gcc -E conftest.c configure:10735: $? = 0 configure:10754: result: yes configure:10764: checking for iconv_open in -liconv configure:10791: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -liconv -ldl -lm -lnsl >&5 /usr/bin/ld: cannot find -liconv collect2: ld returned 1 exit status configure:10794: $? = 1 configure: failed program was: #line 10772 "configure" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char iconv_open (); int main () { iconv_open (); ; return 0; } configure:10811: result: no configure:10817: checking for libiconv_open in -liconv configure:10844: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -liconv -ldl -lm -lnsl >&5 /usr/bin/ld: cannot find -liconv collect2: ld returned 1 exit status configure:10847: $? = 1 configure: failed program was: #line 10825 "configure" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char libiconv_open (); int main () { libiconv_open (); ; return 0; } configure:10864: result: no configure:10878: checking for nl_langinfo and CODESET configure:10896: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 configure:10899: $? = 0 configure:10902: test -s conftest configure:10905: $? = 0 configure:10916: result: yes configure:10989: checking for Objective C support configure:10998: result: no configure:11001: result: ******** disabling ObjectiveCPlugin configure:11020: checking for util.h configure:11030: gcc -E conftest.c configure:11027:18: util.h: No such file or directory configure:11036: $? = 1 configure: failed program was: #line 11026 "configure" #include "confdefs.h" #include <util.h> configure:11055: result: no configure:11020: checking for libutil.h configure:11030: gcc -E conftest.c configure:11027:21: libutil.h: No such file or directory configure:11036: $? = 1 configure: failed program was: #line 11026 "configure" #include "confdefs.h" #include <libutil.h> configure:11055: result: no configure:11020: checking for pty.h configure:11030: gcc -E conftest.c configure:11036: $? = 0 configure:11055: result: yes configure:11020: checking for stropts.h configure:11030: gcc -E conftest.c configure:11036: $? = 0 configure:11055: result: yes configure:11065: checking for library containing openpty configure:11092: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -ldl -lm -lnsl >&5 /tmp/ccEc3uET.o: In function `main': /home/atg/source/squeak/bld/configure:11085: undefined reference to `openpty' collect2: ld returned 1 exit status configure:11095: $? = 1 configure: failed program was: #line 11073 "configure" #include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */ #ifdef __cplusplus extern "C" #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char openpty (); int main () { openpty (); ; return 0; } configure:11132: gcc -o conftest -g -O2 -fomit-frame-pointer -DLSB_FIRST=1 conftest.c -lutil -ldl -lm -lnsl >&5 configure:11135: $? = 0 configure:11138: test -s conftest configure:11141: $? = 0 configure:11154: result: -lutil configure:11243: checking for FFI support configure:11251: result: x86-sysv configure:11379: checking for XOpenDisplay in -lX11 configure:11426: result: yes configure:11548: creating ./config.status
## ----------------------- ## ## Running config.status. ## ## ----------------------- ##
This file was extended by config.status 2.52, executed with CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS =
./config.status
on AlonzoGC
config.status:12074: creating mkconfig config.status:12074: creating make.cfg config.status:12074: creating make.int config.status:12074: creating make.ext config.status:12074: creating make.prg config.status:12074: creating inisqueak config.status:12074: creating Makefile config.status:12166: creating config.h
## ----------------- ## ## Cache variables. ## ## ----------------- ##
ac_cv_atexit=atexit ac_cv_build=i686-pc-linux-gnu ac_cv_build_alias=i686-pc-linux-gnu ac_cv_c_bigendian=no ac_cv_c_compiler_gnu=yes ac_cv_double_align=yes ac_cv_double_order=no ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_func_connect=yes ac_cv_func_dlopen=no ac_cv_func_gethostbyname=yes ac_cv_func_getpagesize=yes ac_cv_func_mmap_fixed_mapped=yes ac_cv_func_remove=yes ac_cv_func_shmat=yes ac_cv_func_snprintf=yes ac_cv_gethostname_p=yes ac_cv_have_x=$'have_x=yes \t\tac_x_includes=/usr/X11R6/include ac_x_libraries=/usr/X11R6/lib' ac_cv_header_GL_gl_h=yes ac_cv_header_dirent_dirent_h=yes ac_cv_header_dlfcn_h=yes ac_cv_header_fcntl_h=yes ac_cv_header_iconv_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_libutil_h=no ac_cv_header_memory_h=yes ac_cv_header_pty_h=yes ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_stropts_h=yes ac_cv_header_sys_file_h=yes ac_cv_header_sys_filio_h=no ac_cv_header_sys_param_h=yes ac_cv_header_sys_select_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_time_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_time=yes ac_cv_header_unistd_h=yes ac_cv_header_util_h=no ac_cv_host=i686-pc-linux-gnu ac_cv_host_alias=i686-pc-linux-gnu ac_cv_iconv=no ac_cv_int64_t=$'long long' ac_cv_langinfo_codeset=yes ac_cv_lib_GL_glIsEnabled=yes ac_cv_lib_ICE_IceConnectionNumber=yes ac_cv_lib_X11_XOpenDisplay=yes ac_cv_lib_Xext_XShmAttach=yes ac_cv_lib_dir_opendir=no ac_cv_lib_dl_dlopen=yes ac_cv_lib_iconv_iconv_open=no ac_cv_lib_iconv_libiconv_open=no ac_cv_lib_m_sin=yes ac_cv_lib_nsl_yp_bind=yes ac_cv_lib_socket_socket=no ac_cv_member_struct_tm_tm_zone=yes ac_cv_module_prefix=$'(none)' ac_cv_objext=o ac_cv_path_install=$'/usr/bin/ginstall -c' ac_cv_prog_AS=as ac_cv_prog_AWK=gawk ac_cv_prog_CPP=$'gcc -E' ac_cv_prog_LN=ln ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_ac_ct_STRIP=strip ac_cv_prog_cc_g=yes ac_cv_prog_make_make_set=yes ac_cv_search_openpty=-lutil ac_cv_socklen_t=yes ac_cv_struct_tm=time.h ac_cv_timezone=yes ac_cv_tm_gmtoff=yes ac_cv_tzset=yes lt_cv_archive_cmds_need_lc=no lt_cv_compiler_c_o=yes lt_cv_compiler_o_lo=yes lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd=$'$MAGIC_CMD' lt_cv_file_magic_test_file=$'/lib/libc.so.6 /lib/libc-2.3.1.so' lt_cv_global_symbol_to_c_name_address=$'sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'' lt_cv_global_symbol_to_cdecl=$'sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'' lt_cv_ld_reload_flag=-r lt_cv_path_LD=/usr/bin/ld lt_cv_path_NM=$'/usr/bin/nm -B' lt_cv_path_SED=/usr/bin/sed lt_cv_prog_cc_can_build_shared=yes lt_cv_prog_cc_no_builtin= lt_cv_prog_cc_pic=$' -fPIC' lt_cv_prog_cc_pic_works=yes lt_cv_prog_cc_shlib= lt_cv_prog_cc_static=-static lt_cv_prog_cc_static_works=yes lt_cv_prog_cc_wl=-Wl, lt_cv_prog_gnu_ld=yes lt_cv_sys_global_symbol_pipe=$'sed -n -e 's/^.*[ \t]\([ABCDGISTW][ABCDGISTW]*\)[ \t][ \t]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'' lt_cv_sys_path_separator=:
## ------------ ## ## confdefs.h. ## ## ------------ ##
#define SQ_VERSION "3.2t-369" #define VM_VERSION "3.5-1devel" #define OS_TYPE "unix" #define VM_HOST "i686-pc-linux-gnu" #define VM_HOST_OS "linux-gnu" #define VM_HOST_CPU "i686" #define squeakInt64 long long #define HAVE_DLFCN_H 1 #define STDC_HEADERS 1 #define HAVE_UNISTD_H 1 #define HAVE_STRING_H 1 #define HAVE_FCNTL_H 1 #define HAVE_SYS_FILE_H 1 #define HAVE_SYS_PARAM_H 1 #define HAVE_SYS_TIME_H 1 #define HAVE_SYS_SELECT_H 1 #define TIME_WITH_SYS_TIME 1 #define HAVE_DIRENT_H 1 #define HAVE_STRUCT_TM_TM_ZONE 1 #define HAVE_TM_ZONE 1 #define AT_EXIT atexit #define HAVE_TZSET 1 #define HAVE_TM_GMTOFF 1 #define HAVE_TIMEZONE 1 #define HAVE_LIBNSL 1 #define HAVE_LIBM 1 #define HAVE_DLFCN_H 1 #define HAVE_LIBDL 1 #define HAVE_SNPRINTF 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_STDLIB_H 1 #define HAVE_UNISTD_H 1 #define HAVE_GETPAGESIZE 1 #define HAVE_MMAP 1 #define VM_MODULE_PREFIX "" #define DOUBLE_WORD_ORDER 1 #define SQ_LIBDIR "/usr/local/lib/squeak/3.2t-369" #define VM_LIBDIR "/usr/local/lib/squeak/3.5-1devel" #define USE_X11 1 #define HAVE_LIBXEXT 1 #define HAVE_GL_GL_H 1 #define USE_X11_GLX 1 #define HAVE_LIBGL 1 #define HAVE_ICONV_H 1 #define HAVE_LANGINFO_CODESET 1 #define HAVE_PTY_H 1 #define HAVE_STROPTS_H 1 #define HAVE_OPENPTY 1
configure: exit 0
squeak-dev@lists.squeakfoundation.org