Yes. I plan to later. I just didn't have the energy to do pictures/video and fight Wordpress right now, and I'll see if there are issues anyone runs into that I can capture.

cheers -ben

On Thu, 29 Aug 2019 at 06:44, Nicolas Cellier < nicolas.cellier.aka.nice@gmail.com> wrote:

This would make be a great blog post!

Le mer. 28 août 2019 à 15:37, Ben Coman btc@openinworld.com a écrit :

...

Guille's procrastination experiments inspired me to procrastination of my own, with an experiment around debugging Pharo-Headless-Linux-VM using Visual Studio running on Windows. I've refined the steps-from-scratch to reproduce down to the following...

Overview...

1. Install Windows Subsystem from Linux
2. Install Visual Studio 2019
3. Build and run hello-world exercise inside WSL
4. Build and run Pharo-Headless-VM inside WSL

Now lets get started...

############################### Install Windows Subsystem from Linux ############################### 1A. On a Windows 10 box, go to the Windows App Store and Ubuntu 18.04...

Ref: https://docs.microsoft.com/en-us/windows/wsl/install-win10

1B. Ensure this configured as the default (otherwise later the $defaultWSLPath variable doesn't work and you may see a Visual Studio error "Could not open windows subsystem shell")...

C:\Users\Ben>wslconfig /l Windows Subsystem for Linux Distributions: Legacy (Default) kali-linux Ubuntu-18.04 Ubuntu-16.04

C:\Users\Ben>wslconfig /setdefault Ubuntu-18.04

C:\Users\Ben>wslconfig /l Windows Subsystem for Linux Distributions: Ubuntu-18.04 (Default) Legacy kali-linux Ubuntu-16.04

Ref: https://www.howtogeek.com/344688/how-to-set-your-default-linux-distribution-...

btw, my Windows 10 box recently upgrade to latest version. C:\Users\Ben> ver Microsoft Windows [Version 10.0.18362.295]

1C. Start Ubuntu-18.04, then update/upgrade/install pre-requisites...

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install clang gcc gdb make rsync zip        # Visual Studio
requirement
sudo apt-get install uuid-dev                      # Pharo VM build
requirement

While that is running...

#################### Install Visual Studio 2019 #################### 2A. Download and run the installer for Visual Studio Community 2019 (not Visual Studio Code)

Ref: https://visualstudio.microsoft.com/free-developer-offers/

2B. When the "Visual Studio Installer" opens, under its "Workloads" tab, select "Linux development with C++" and click **Install**.

Ref: https://docs.microsoft.com/en-us/cpp/linux/download-install-and-setup-the-li...

##################################### Build and run hello-world exercise inside WSL ##################################### 3A. Start Visual Studio 2019 and at its opening window, under "Get started" click "Create a new project". Then scroll down and choose "CMake Project" and <Next>. and configure... Project name: hello-world then click <Create>.

Ref: https://docs.microsoft.com/en-us/cpp/linux/cmake-linux-project?view=vs-2019

Now it may immediately start the CMake build and get an error because its using the default "x64-Debug" configuration. Ignore that, we will create a new configuration to build on Windows Subsystem for Linux.

3B. From the "Configuration drop-down" (where you see "x64-Debug") select "Manage Configurations..." Delete "x64-Debug". Add... "WSL-Debug" and use all defaults then press <CTRL-S> to save.

Inside WSL, Cmake will start generating the makefiles.

At some point you might see "Supported CMake version is not present on WSL. Install CMake binaries built by Microsoft?" YES, do that.

3C. After "CMake generation finished", pull down "Select Startup Item" and select "hello-world" then press the green PLAY button.

Inside WSL, the make build will start and after its done the pharo executable will run there. In the [Output] tab, it was successful if you see "The thread 'hello-world' (0x1f7a) has exited with code 0" .

3D. For proof that its running inside WSL, lets write a file! In the "Solution Explorer" tab, browse to "hello-world.cpp" and change its contents to...

#include <stdio.h>
int main()
{
    FILE* fp;
    int i;
    /* open the file for writing*/
    fp = fopen("/tmp/built-by-visual-studio", "w");
    fprintf(fp, "It worked.\n");
    fclose(fp);
    return 0;
}

then press the green PLAY button. After you see "thread 'hello-world' has exited with code 0" open a WSL shell and run... $ cat /tmp/built-by-visual-studio It worked

3E. To experience debugging Linux from Visual Studio, first remove the test file... $ rm /tmp/built-by-visual-studio then put a breakpoint on "fopen" and click the PLAY button. Check if the file is there... $ cat /tmp/built-by-visual-studio cat: /tmp/built-by-visual-studio: No such file or directory <STEP OVER> fopen $ cat /tmp/built-by-visual-studio <STEP OVER> fprintf $ cat /tmp/built-by-visual-studio <STEP OVER> fclose $ cat /tmp/built-by-visual-studio It worked

3F. All done... File > Close Folder

##################################### Build and run Pharo-Headless-VM inside WSL ##################################### 4A. From Visual Studio 2019 opening window, under "Get started" click "Clone or check out code" Repository location: https://github.com/bencoman/opensmalltalk-vm.git then click <Clone>.

https://docs.microsoft.com/en-us/visualstudio/get-started/tutorial-open-proj...

4B. In the bottom-right status bar, click the "branching" icon and choose "Manage Branches". Expand "remotes/origin", then right-click "headless-WSL-VisualStudio" and "Checkout"

A fixed "WSL-Debug" configuration is a part of this branch, so its CMake-build should auto-start and complete successfully.

4C. After "CMake generation finished", pull down "Select Startup Item" and select "pharo (build/vm/pharo)" then press the green PLAY button.

Don't worry if it sits for a long time on "BalloonEnginePlugin>>primitiveAddRect"

The [Error List] tab pops up with 116 Warnings. Switching back to the [Output] tab, you hopefully see "thread 'pharo' (0x4d0d) has exited with code 0"

So the VM just built and ran headless under Windows Subsystem for Linux.

Now lets debug that from Visual Studio.

4D. Browse to src/main.c and put a breakpoint in main() on the call to parseArguments() Then click the PLAY button. Once stopped at the breakpoint, <STEP INTO>. In the [Autos] tab, expand the "parameters" variable. Observe "imageFile" is empty. Notice "imageFile" becomes "Pharo.image" after <STEP OVER> splitVMAndImageParameters().

So now I leave you to play. I'd be interested in hearing about people's experiences.

Placing the correct PharoHeadless.image in the right place to actually run the image is left as an exercise for the reader.

cheers -ben