I checked out a copy of the sources as directed on isqueak.org and tried to build, but ran into a couple of problems.
I wanted to start with as much stability as possible so I figured I'd check out the standard VM before Cog.
First, my base SDK was missing. I googled that. Found this:
http://developer.apple.com/library/ios/#qa/qa2010/qa1701.html
Followed the instructions there. It didn't seem to change anything, but it's worth noting that I did change my settings per this article. I'm guessing what I found below overrides those settings? Anyway, it's worth noting that when I was finally able to build, I did so after following those instructions, so I'm not sure at this time whether or not they were necessary.
I don't have a 3.2 or 4.1 SDK. I searched for a bit and didn't find a place to get either one. Xcode complaints were of the form 'iphoneos4.1', so I grepped.
stratosphere:vm casey$ grep -rl iphoneos4.1 . | grep -v svn ./SqueakPureObjcCogVM.xcodeproj/project.pbxproj stratosphere:vm casey$ grep iphoneos4.1 ./SqueakPureObjcCogVM.xcodeproj/project.pbxproj SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1;
Did a search/replace-all and changed these to iphoneos4.2.
I struggled with dialog boxes complaining that Xcode detected tomfoolery on disk and wanted to overwrite my changes after modifying this file. If I did this again, I'd probably quit Xcode, make the modification with a text editor, and then reopen Xcode to build.
Once this was done, it was just a matter of resolving the dependencies on the Pharo and Squeak .sources files, and voila: I was looking at John's Obj-C bridge in the iPhone simulator with a big grin on my face.
All in all, it was a fun half hour! Now to make some tea and get to bed. Sorry if this is old news, figured I'd write it down in case it'd help anyone else:)
Except in my recap I use the Cog vm as an example in spite of having said that I used the standard, which is awfully confusing. Gorram unix! These directories all look the same:)
On Wed, Dec 1, 2010 at 9:49 PM, Casey Ransberger casey.obrien.r@gmail.comwrote:
I checked out a copy of the sources as directed on isqueak.org and tried to build, but ran into a couple of problems.
I wanted to start with as much stability as possible so I figured I'd check out the standard VM before Cog.
First, my base SDK was missing. I googled that. Found this:
http://developer.apple.com/library/ios/#qa/qa2010/qa1701.html
Followed the instructions there. It didn't seem to change anything, but it's worth noting that I did change my settings per this article. I'm guessing what I found below overrides those settings? Anyway, it's worth noting that when I was finally able to build, I did so after following those instructions, so I'm not sure at this time whether or not they were necessary.
I don't have a 3.2 or 4.1 SDK. I searched for a bit and didn't find a place to get either one. Xcode complaints were of the form 'iphoneos4.1', so I grepped.
stratosphere:vm casey$ grep -rl iphoneos4.1 . | grep -v svn ./SqueakPureObjcCogVM.xcodeproj/project.pbxproj stratosphere:vm casey$ grep iphoneos4.1 ./SqueakPureObjcCogVM.xcodeproj/project.pbxproj SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1;
Did a search/replace-all and changed these to iphoneos4.2.
I struggled with dialog boxes complaining that Xcode detected tomfoolery on disk and wanted to overwrite my changes after modifying this file. If I did this again, I'd probably quit Xcode, make the modification with a text editor, and then reopen Xcode to build.
Once this was done, it was just a matter of resolving the dependencies on the Pharo and Squeak .sources files, and voila: I was looking at John's Obj-C bridge in the iPhone simulator with a big grin on my face.
All in all, it was a fun half hour! Now to make some tea and get to bed. Sorry if this is old news, figured I'd write it down in case it'd help anyone else:)
-- Casey Ransberger
Casey, you'll have more fun if you take the current source from http://squeakvm.org because we merged it into the main thrunk a couple of months ago... Look in the /platforms/iOS folder for the xcode projects
On 2010-12-01, at 9:53 PM, Casey Ransberger wrote:
Except in my recap I use the Cog vm as an example in spite of having said that I used the standard, which is awfully confusing. Gorram unix! These directories all look the same:)
-- =========================================================================== John M. McIntosh johnmci@smalltalkconsulting.com Twitter: squeaker68882 Corporate Smalltalk Consulting Ltd. http://www.smalltalkconsulting.com ===========================================================================
Looked through my history, I checked out with this:
svn co http://squeakvm.org/svn/squeak/trunk squeak-svn
Am I bungling the subversion?
On Wed, Dec 1, 2010 at 10:20 PM, John M McIntosh < johnmci@smalltalkconsulting.com> wrote:
Casey, you'll have more fun if you take the current source from http://squeakvm.org because we merged it into the main thrunk a couple of months ago... Look in the /platforms/iOS folder for the xcode projects
On 2010-12-01, at 9:53 PM, Casey Ransberger wrote:
Except in my recap I use the Cog vm as an example in spite of having said that I used the standard, which is awfully confusing. Gorram unix! These directories all look the same:)
--
John M. McIntosh johnmci@smalltalkconsulting.com Twitter: squeaker68882 Corporate Smalltalk Consulting Ltd. http://www.smalltalkconsulting.com ===========================================================================
Ah, I had read "isqueak.org " and thought you had check it out from there. No you have the right version, mind right this second building the cog stack VM won't really fly because you are missing some patches.
On 2010-12-01, at 11:16 PM, Casey Ransberger wrote:
Looked through my history, I checked out with this:
svn co http://squeakvm.org/svn/squeak/trunk squeak-svn
Am I bungling the subversion?
On Wed, Dec 1, 2010 at 10:20 PM, John M McIntosh johnmci@smalltalkconsulting.com wrote:
Casey, you'll have more fun if you take the current source from http://squeakvm.org because we merged it into the main thrunk a couple of months ago... Look in the /platforms/iOS folder for the xcode projects
On 2010-12-01, at 9:53 PM, Casey Ransberger wrote:
Except in my recap I use the Cog vm as an example in spite of having said that I used the standard, which is awfully confusing. Gorram unix! These directories all look the same:)
--
John M. McIntosh johnmci@smalltalkconsulting.com Twitter: squeaker68882 Corporate Smalltalk Consulting Ltd. http://www.smalltalkconsulting.com ===========================================================================
-- Casey Ransberger
-- =========================================================================== John M. McIntosh johnmci@smalltalkconsulting.com Twitter: squeaker68882 Corporate Smalltalk Consulting Ltd. http://www.smalltalkconsulting.com ===========================================================================
On 02.12.2010, at 06:49, Casey Ransberger wrote:
I checked out a copy of the sources as directed on isqueak.org and tried to build, but ran into a couple of problems.
I wanted to start with as much stability as possible so I figured I'd check out the standard VM before Cog.
First, my base SDK was missing. I googled that. Found this:
http://developer.apple.com/library/ios/#qa/qa2010/qa1701.html
Followed the instructions there. It didn't seem to change anything, but it's worth noting that I did change my settings per this article. I'm guessing what I found below overrides those settings? Anyway, it's worth noting that when I was finally able to build, I did so after following those instructions, so I'm not sure at this time whether or not they were necessary.
I don't have a 3.2 or 4.1 SDK. I searched for a bit and didn't find a place to get either one. Xcode complaints were of the form 'iphoneos4.1', so I grepped.
stratosphere:vm casey$ grep -rl iphoneos4.1 . | grep -v svn ./SqueakPureObjcCogVM.xcodeproj/project.pbxproj stratosphere:vm casey$ grep iphoneos4.1 ./SqueakPureObjcCogVM.xcodeproj/project.pbxproj SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1;
Did a search/replace-all and changed these to iphoneos4.2.
I struggled with dialog boxes complaining that Xcode detected tomfoolery on disk and wanted to overwrite my changes after modifying this file. If I did this again, I'd probably quit Xcode, make the modification with a text editor, and then reopen Xcode to build.
Once this was done, it was just a matter of resolving the dependencies on the Pharo and Squeak .sources files, and voila: I was looking at John's Obj-C bridge in the iPhone simulator with a big grin on my face.
All in all, it was a fun half hour! Now to make some tea and get to bed. Sorry if this is old news, figured I'd write it down in case it'd help anyone else:)
-- Casey Ransberger
I changed the SDK to 4.2 using the project inspector. Worked too.
But I had a problem in SocketPlugin/sqUnixSocket.c that netinet/udp.h was not found. Anyone else seeing this? I removed the #include and it seemed to work ...
Maybe because I set the minimal deployment version to 3.2? I didn't experiment much.
- Bert -
Yeah, I see that.
On Thu, Dec 2, 2010 at 4:52 AM, Bert Freudenberg bert@freudenbergs.dewrote:
On 02.12.2010, at 06:49, Casey Ransberger wrote:
I checked out a copy of the sources as directed on isqueak.org and tried
to build, but ran into a couple of problems.
I wanted to start with as much stability as possible so I figured I'd
check out the standard VM before Cog.
First, my base SDK was missing. I googled that. Found this:
http://developer.apple.com/library/ios/#qa/qa2010/qa1701.html
Followed the instructions there. It didn't seem to change anything, but
it's worth noting that I did change my settings per this article. I'm guessing what I found below overrides those settings? Anyway, it's worth noting that when I was finally able to build, I did so after following those instructions, so I'm not sure at this time whether or not they were necessary.
I don't have a 3.2 or 4.1 SDK. I searched for a bit and didn't find a
place to get either one. Xcode complaints were of the form 'iphoneos4.1', so I grepped.
stratosphere:vm casey$ grep -rl iphoneos4.1 . | grep -v svn ./SqueakPureObjcCogVM.xcodeproj/project.pbxproj stratosphere:vm casey$ grep iphoneos4.1
./SqueakPureObjcCogVM.xcodeproj/project.pbxproj
SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1; SDKROOT = iphoneos4.1;Did a search/replace-all and changed these to iphoneos4.2.
I struggled with dialog boxes complaining that Xcode detected tomfoolery
on disk and wanted to overwrite my changes after modifying this file. If I did this again, I'd probably quit Xcode, make the modification with a text editor, and then reopen Xcode to build.
Once this was done, it was just a matter of resolving the dependencies on
the Pharo and Squeak .sources files, and voila: I was looking at John's Obj-C bridge in the iPhone simulator with a big grin on my face.
All in all, it was a fun half hour! Now to make some tea and get to bed.
Sorry if this is old news, figured I'd write it down in case it'd help anyone else:)
-- Casey Ransberger
I changed the SDK to 4.2 using the project inspector. Worked too.
But I had a problem in SocketPlugin/sqUnixSocket.c that netinet/udp.h was not found. Anyone else seeing this? I removed the #include and it seemed to work ...
Maybe because I set the minimal deployment version to 3.2? I didn't experiment much.
- Bert -
vm-dev@lists.squeakfoundation.org
-
Bert Freudenberg -
Casey Ransberger -
John M McIntosh