seaside-dev January 2014

seaside-dev@lists.squeakfoundation.org

9 participants
10 discussions

"Bootstrap" project for Seaside with separated Magritte support in a new project "BootstrapMagritte" on STHub
by Torsten Bergmann 16 Jul '18

16 Jul '18

Hi, The bundling with magritte polluted the repo and the Bootstrap project with stuff that was not really needed for "Seaside + Bootstrap" only. Also a "Bootstrap-Demo" package appeared that was more a demo for magritte than for Bootstrap. Since there already was an "Bootstrap-Examples" package this added more confusion (at least on my side). I now took action and cleaned up the Bootstrap project again to remove the magritte stuff. If one wants to to use Bootstrap with Seaside he does not necessarily have to go the Magritte path, so IMHO this was necessary. The magritte stuff for Bootstrap is now hosted as an own separate project on STHub which would also help to see to which part code additions really belong. As a result: ============ 1. The Bootstrap project now again only contains and loads the initial three packages: - Bootstrap-Core - Bootstrap-Tests-Core - Bootstrap-Examples assembled by the known ConfigurationOfBootstrap 2. The Magritte support on top of Bootstrap is now separated in an own project to avoid too much mixin. See "BootstrapMagritte" on SmalltalkHub. The new repo "http://smalltalkhub.com/#!/~TorstenBergmann/BootstrapMagritte" has the same commiters as the old one, so feel free to continue with your work. This project includes two packages: - Bootstrap-Magritte-Core (former Bootstrap-Magritte) - Bootstrap-Magritte-Examples (former Bootstrap-Demo) assembled by a new ConfigurationOfBootstrapMagritte for this particular project 3. The Bootstrap/ConfigurationOfBootstrap is now available as - a release version 0.4.0 for Seaside 3.0.9 - a release version 0.5.0 for Seaside 3.0.10 - a release version 0.6.0 for Seaside 3.1.0 (#stable) - a development version 0.7.0 for Seaside 3.1.0 for new stuff 4. The CI for Bootstrap is green for Pharo 2.0 and now also Pharo 3.0 5. The config browser is updated for Pharo 2.0 and Pharo 3.0 with the "Bootstrap" package So you can now also open a fresh Pharo 3.0 image, open World menu -> Configuration Browser to load "Bootstrap". Then run ZnZincServerAdaptor startOn: 8080 and start coding your web application with the latest Seaside 3.1.0. Next steps: Setting up a CI for the new project "BootstrapMagritte"/ConfigurationOfBootstrapMagritte Have fun! Bye Torsten

3 7

REST packages now in configuration
by Johan Brichau 02 Feb '14

02 Feb '14

Hi, It seems we forgot to add the REST packages for 3.1 to the ConfigurationOfSeaside3 I added them now and also made a package-split for Pharo3 (which also works in Pharo2 but not in Pharo1.4). I did the same for REST in 3.0 but that happens via ConfigurationOfSeasideRest. cheers Johan

3 4

GRPharoUtf8CodecStream does not understand object:
by Sabine Knöfel 27 Jan '14

27 Jan '14

Hi, I think there is a bug in Seaside. I run into this when using JQGrid. Code in Pharo3: Dictionary>>jsonOn: aRenderer aRenderer object: [ self keysAndValuesDo: [ :key :value | aRenderer key: key value: value ] ] aRenderer is iOf GRPharoUtf8CodecStream GRPharoUtf8CodecStream does not understand object: You can reproduce it also when running JQGrid example. Have a look in the Network response in the internet browser where you will see a 500 internal server error with "MessageNotUnderstood: GRPharoUtf8CodecStream>>object: Your request could not be completed. An exception occurred." or implement GRPharoUtf8CodecStream>>object: anObject self halt. In Pharo2, it was implemented like this: Dictionary>>jsonOn: aStream JSJsonStream encodeDictionary: self on: aStream Sabine -- View this message in context: http://forum.world.st/GRPharoUtf8CodecStream-does-not-understand-object-tp4… Sent from the Seaside Development mailing list archive at Nabble.com.

2 4

seaside3.1 on gemstone2.4
by Johan Brichau 25 Jan '14

25 Jan '14

Hi Dale, Can you remember what the issue was to get Seaside3.1 ported to gemstone 2.4? In Annecy, you and Philippe were talking about some changes that would only be portable to gemstone 3. Can you give me quick pointers to what they are? thanks johan

1 0

Fwd: [Pharo-dev] errorImproperStore error because of change in GRPharoPlatform>>readWriteByteStream
by Johan Brichau 24 Jan '14

24 Jan '14

I think there's a bug in Grease1.1 for Pharo2.0 and Pharo3.0 Begin forwarded message: > From: Johan Brichau <johan(a)inceptive.be> > Subject: Re: [Pharo-dev] errorImproperStore error because of change in GRPharoPlatform>>readWriteByteStream > Date: 16 Jan 2014 21:02:39 GMT+1 > To: Pharo Development List <pharo-dev(a)lists.pharo.org> > > Sabine, > > This might be a bug in Grease 1.1 for Pharo3 because Grease 1.0 has identical code for that method in Pharo 2 and 3. > The timestamp of that method in Grease1.1 is even older than the one in Grease1.0... so it definitely smells buggy... > > Johan > > On 16 Jan 2014, at 17:41, Sabine Knöfel <sabine.knoefel(a)gmail.com> wrote: > >> Hi, >> >> I am migrating from Pharo 2.0 to Pharo3.0 >> >> My updateRoot contains the following statement: >> >> updateRoot: aHtmlRoot >> aHtmlRoot link url: RKALibrary / #mainStylesLess; relationship: >> 'stylesheet/less'; beCss. >> >> In Pharo 3.0 I get ByteArray errorImproperStore error (Pharo2.0 works) >> >> When debugging into, I see: >> In Pharo 2.0 >> >> GRPharoPlatform>>readWriteByteStream >> "ByteArray based read write stream" >> ^ RWBinaryOrTextStream on: (ByteArray new: 4096) >> >> In Pharo 3.0 >> GRPharoPlatform>>readWriteByteStream >> "ByteArray based read write stream" >> ^ ReadWriteStream on: (ByteArray new: 4096) >> >> This is the reason for the error improperStore error. >> If I change from ReadWriteStream to RWBinaryOrTextStream, it works. >> >> Can anyone fix this or is my conclusion wrong? >> Regards >> Sabine >> >> >> >> >> >> -- >> View this message in context: http://forum.world.st/errorImproperStore-error-because-of-change-in-GRPharo… >> Sent from the Pharo Smalltalk Developers mailing list archive at Nabble.com. >> >

2 3

Re: [Seaside] [ANN] Seaside 3.1 and 3.0.10 release
by Philippe Marschall 24 Jan '14

24 Jan '14

On Mon, Jan 20, 2014 at 8:24 PM, Bob Arning <arning315(a)comcast.net> wrote: > > On 1/20/14 1:49 PM, Philippe Marschall wrote: >> >> The "Kom" group is not available for Squeak, try "WebClient" instead. > > OK, so I tried > > ((Smalltalk at: #ConfigurationOfSeaside3) project version: #stable) load: #( > 'WebClient'). > > And got: > > Error: Could not resolve: WebClient-Seaside [WebClient-Seaside-ar.10] in > /Users/bob/squeak/SECOG/package-cache > http://smalltalkhub.com/mc/Seaside/Seaside31/main > 20 January 2014 2:19:56.365 pm Can somebody with a better understanding of Metacello have you look at this? Somehow it searches for WebClient-Seaside-ar.10 only in http://smalltalkhub.com/mc/Seaside/Seaside31/main I use the following code: (Installer monticello http: 'http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main'); install: 'ConfigurationOfSeaside3'. ((Smalltalk at: #ConfigurationOfSeaside3) project version: #stable) load: #('Core' 'WebClient'). Cheers Philippe

2 2

Re: [ANN] Pillar release 0.6
by Norbert Hartl 16 Jan '14

16 Jan '14

Am 15.01.2014 um 18:17 schrieb Damien Cassou <damien.cassou(a)gmail.com>: > Dear lists, > > I'm proud to announce the 0.6 release of Pillar, a syntax and > associated tools to write and generate documentation and books. > Great! This sounds really useful. I need to check this out. > Pillar is currently used to write the Enterprise Pharo book > (https://ci.inria.fr/pharo-contribution/job/PharoForTheEnterprise/) > and other projects. > Btw. the chapters 9 and 11 are nearly duplicates. Well done, norbert > The attached screenshot shows a part of the Voyage documentation > generated by Pillar (from > https://github.com/SquareBracketAssociates/PharoForTheEnterprise-english/bl…). > > Pillar has many features: > - simple markup-based syntax with references, tables, pictures, > captions... (this is the syntax of Pier) > - export to HTML, LaTeX and markdown (more to come) > - customization of the export through a dedicated STON configuration file > - support of templates using the Mustache templating engine > - syntax-highlighting of generated code blocks (not yet in LaTeX) > - configurable numbering of section titles and figures > - ... > > Pillar has also: > - a 5-minutes tutorial > (https://github.com/DamienCassou/pillar-documentation/blob/master/README.md#…) > - a documentation > (https://github.com/DamienCassou/pillar-documentation) (in progress) > - a good test coverage (91% with more than a 1000 executed tests) > - a continuous integration job > (https://ci.inria.fr/pharo-contribution/job/Pillar/) > - a command-line interface > (https://github.com/DamienCassou/pillar-documentation#5--command-line-interf…) > - several existing use cases: > https://github.com/DamienCassou/pillar-documentation#6--example-pillar-usage > > -- > Damien Cassou > http://damiencassou.seasidehosting.st > > "Success is the ability to go from one failure to another without > losing enthusiasm." > Winston Churchill > <pillar-voyage.png>_______________________________________________ > Magritte, Pier and Related Tools ... > https://www.iam.unibe.ch/mailman/listinfo/smallwiki

1 0

Re: [ANN] Pillar release 0.6
by Damien Cassou 16 Jan '14

16 Jan '14

On Wed, Jan 15, 2014 at 6:17 PM, Damien Cassou <damien.cassou(a)gmail.com> wrote: > I'm proud to announce the 0.6 release of Pillar, a syntax and > associated tools to write and generate documentation and books. I forgot to say who where the contributors, sorry about that: - Lukas Renggli created Pier a long time ago from which I extracted the document model, parser and many unit tests - Benjamin van Ryseghem contributed the Mardown exporter - Benjamin van Ryseghem helped me a lot about the command-line interface, the STON configuration interpreter and many other stuffs - Guillermo Polito fixed a bug - Steph for its continuous feedback from the beginning of the project and his original idea -- Damien Cassou http://damiencassou.seasidehosting.st "Success is the ability to go from one failure to another without losing enthusiasm." Winston Churchill

1 0

Re: [Pharo-users] [Pharo-dev] [ANN] Pillar release 0.6
by Sven Van Caekenberghe 15 Jan '14

15 Jan '14

On 15 Jan 2014, at 23:21, Tudor Girba <tudor(a)tudorgirba.com> wrote: > Gofer new > smalltalkhubUser: 'Pier' project: 'Pillar'; > configuration; > load. > (Smalltalk globals at: #ConfigurationOfPillar) load Even shorter: Gofer new smalltalkhubUser: 'Pier' project: 'Pillar'; configuration; loadStable. ;-)

1 0

add 'Base' group to ConfigurationOfSeaside3 for version 3.1.0
by Paul DeBruicker 15 Jan '14

15 Jan '14

Does anyone have a problem with me adding spec group: 'Base' with: #('Core'); so that projects that rely on Seaside and refer to the 'Base' group can load? AFAIK 'Base' was renamed to 'Core' in the recent configs Thanks Paul

4 5

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

seaside-dev January 2014