seaside-dev July 2016

seaside-dev@lists.squeakfoundation.org

2 participants
11 discussions

"Bootstrap" project for Seaside with separated Magritte support in a new project "BootstrapMagritte" on STHub
by Torsten Bergmann 16 Jul '18

16 Jul '18

Hi, The bundling with magritte polluted the repo and the Bootstrap project with stuff that was not really needed for "Seaside + Bootstrap" only. Also a "Bootstrap-Demo" package appeared that was more a demo for magritte than for Bootstrap. Since there already was an "Bootstrap-Examples" package this added more confusion (at least on my side). I now took action and cleaned up the Bootstrap project again to remove the magritte stuff. If one wants to to use Bootstrap with Seaside he does not necessarily have to go the Magritte path, so IMHO this was necessary. The magritte stuff for Bootstrap is now hosted as an own separate project on STHub which would also help to see to which part code additions really belong. As a result: ============ 1. The Bootstrap project now again only contains and loads the initial three packages: - Bootstrap-Core - Bootstrap-Tests-Core - Bootstrap-Examples assembled by the known ConfigurationOfBootstrap 2. The Magritte support on top of Bootstrap is now separated in an own project to avoid too much mixin. See "BootstrapMagritte" on SmalltalkHub. The new repo "http://smalltalkhub.com/#!/~TorstenBergmann/BootstrapMagritte" has the same commiters as the old one, so feel free to continue with your work. This project includes two packages: - Bootstrap-Magritte-Core (former Bootstrap-Magritte) - Bootstrap-Magritte-Examples (former Bootstrap-Demo) assembled by a new ConfigurationOfBootstrapMagritte for this particular project 3. The Bootstrap/ConfigurationOfBootstrap is now available as - a release version 0.4.0 for Seaside 3.0.9 - a release version 0.5.0 for Seaside 3.0.10 - a release version 0.6.0 for Seaside 3.1.0 (#stable) - a development version 0.7.0 for Seaside 3.1.0 for new stuff 4. The CI for Bootstrap is green for Pharo 2.0 and now also Pharo 3.0 5. The config browser is updated for Pharo 2.0 and Pharo 3.0 with the "Bootstrap" package So you can now also open a fresh Pharo 3.0 image, open World menu -> Configuration Browser to load "Bootstrap". Then run ZnZincServerAdaptor startOn: 8080 and start coding your web application with the latest Seaside 3.1.0. Next steps: Setting up a CI for the new project "BootstrapMagritte"/ConfigurationOfBootstrapMagritte Have fun! Bye Torsten

3 7

Release 3.2.0
by Johan Brichau 23 Aug '16

23 Aug '16

Hi Philippe, Dale, Stephan, Esteban and other contributors, I propose to release 3.2.0 as it is right now [1]. What do you think? Anything missing? The new website and reworking Seaside Welcome + Config can be postponed. Though the new website is the next thing on my stack. At the same time, I want to propose that the github repository becomes the main repository. I’ve been setting up Grease and Seaside on github with the SmalltalkCI and it’s very nice to have that test coverage on all platforms [2]. It also means we can have a more organised way of contributions via pull requests and feature branches. Any opinions? Perhaps I should write up a small page on how contributing would work (technically) for those who are not into Smalltalk+Git cheers Johan [1] https://ci.inria.fr/pharo-contribution/job/Seaside/ <https://ci.inria.fr/pharo-contribution/job/Seaside/> [2] https://travis-ci.org/SeasideSt/Seaside/builds <https://travis-ci.org/SeasideSt/Seaside/builds>

3 7

Build failed in Jenkins: Grease » 50,bleedingEdge,vm #535
by ci-pharo-contribution＠inria.fr 05 Aug '16

05 Aug '16

See <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=50,VERSION=bleeding…> ------------------------------------------ Started by upstream project "Grease" build number 535 originally caused by: Started by timer Building remotely on pharo-contribution-linux64-3 (32 64 pharo-contribution-linux64-3.ci.inria.fr linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=50,VERSION=bleeding…> Deleting project workspace... Deleting old artifacts from #533 [vm] $ /bin/sh -xe /tmp/hudson1080344860254385260.sh + dirname Grease/PHARO=50,VERSION=bleedingEdge,VM=vm + export JOB_NAME=Grease + wget --quiet -O - get.pharo.org/50+vm + bash Downloading the latest 50 Image: http://files.pharo.org/get-files/50/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/50/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV50.sources: http://files.pharo.org/get-files/50/sources.zip Creating starter scripts pharo and pharo-ui + ./pharo Pharo.image save Grease --delete-old + ./pharo Grease.image --version + REPO=http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main + ./pharo Grease.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfGrease --install=bleedingEdge --group=Tests 'Installing ConfigurationOfGrease bleedingEdge' [31mGoferRepositoryError: Could not access http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main/: ZnHttpUnsuccessful: 400 Bad Request [0m[ :error | ^ GoferRepositoryError signal: error messageText repository: self ] in MCSmalltalkhubRepository(MCFileBasedRepository)>>goferReferences in Block: [ :error | ^ GoferRepositoryError signal: error me...etc... BlockClosure>>cull: Context>>evaluateSignal: Context>>handleSignal: MCRepositoryError(Exception)>>signal MCRepositoryError(Exception)>>signal: MCSmalltalkhubRepository(MCRepository)>>error: [ :exception | self error: 'Could not access ' , self location , ': ' , exception printString ] in MCSmalltalkhubRepository>>loadAllFileNames in Block: [ :exception | ... BlockClosure>>cull: Context>>evaluateSignal: Context>>handleSignal: Context>>handleSignal: ZnHttpUnsuccessful(Exception)>>signal ZnClient>>handleResponse ZnClient>>executeWithRedirectsRemaining: [ self executeWithRedirectsRemaining: self maxNumberOfRedirects ] in ZnClient>>executeWithRetriesRemaining: in Block: [ self executeWithRedirectsRemaining: self maxNumb...etc... BlockClosure>>on:do: ZnClient>>executeWithRetriesRemaining: [ self executeWithRetriesRemaining: self numberOfRetries ] in [ [ self executeWithRetriesRemaining: self numberOfRetries ] on: Error do: self ifFailBlock ] in ZnClient>>executeWithTimeout in Block: [ self executeWithRetriesRemaining: self numberOfR...etc... BlockClosure>>on:do: [ [ self executeWithRetriesRemaining: self numberOfRetries ] on: Error do: self ifFailBlock ] in ZnClient>>executeWithTimeout in Block: [ [ self executeWithRetriesRemaining: self numberO...etc... [ ^ block value ] in ZnClient>>withTimeoutDo: in Block: [ ^ block value ] [ p psValueAt: index put: anObject. aBlock value ] in ZnConnectionTimeout(DynamicVariable)>>value:during: in Block: [ p psValueAt: index put: anObject.... BlockClosure>>ensure: ZnConnectionTimeout(DynamicVariable)>>value:during: ZnConnectionTimeout class(DynamicVariable class)>>value:during: ZnClient>>withTimeoutDo: ZnClient>>executeWithTimeout [ result := self executeWithTimeout ] in ZnClient>>execute in Block: [ result := self executeWithTimeout ] [ ^ block value ] in ZnClient>>withProgressDo: in Block: [ ^ block value ] [0mBuild step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 2

Build failed in Jenkins: Grease » 50,development,vm #536
by ci-pharo-contribution＠inria.fr 05 Aug '16

05 Aug '16

See <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=50,VERSION=developm…> ------------------------------------------ Started by upstream project "Grease" build number 536 originally caused by: Started by timer Building remotely on pharo-contribution-linux64-4.ci.inria.fr (32 64 linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=50,VERSION=developm…> Deleting project workspace... Deleting old artifacts from #534 [vm] $ /bin/sh -xe /tmp/hudson5407552258471196376.sh + dirname Grease/PHARO=50,VERSION=development,VM=vm + export JOB_NAME=Grease + bash + wget --quiet -O - get.pharo.org/50+vm Downloading the latest 50 Image: http://files.pharo.org/get-files/50/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/50/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV50.sources: http://files.pharo.org/get-files/50/sources.zip Creating starter scripts pharo and pharo-ui + ./pharo Pharo.image save Grease --delete-old + ./pharo Grease.image --version + REPO=http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main + ./pharo Grease.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfGrease --install=development --group=Tests 'Installing ConfigurationOfGrease development' [31mError: MessageNotUnderstood: receiver of "finish" is nil [0mUndefinedObject(Object)>>error: [ :err :rcvr | | errCtx errMorph | errCtx := thisContext. [ errCtx := errCtx sender. "Search the sender chain to find the morph causing the problem" [ errCtx notNil and: [ errCtx receiver isMorph not ] ] whileTrue: [ errCtx := errCtx sender ]. "If we're at the root of the context chain then we have a fatal drawing problem" errCtx ifNil: [ ^ self handleFatalDrawingError: err ]. errMorph := errCtx receiver. "If the morph causing the problem has already the #drawError flag set, then search for the next morph above in the caller chain." errMorph hasProperty: #errorOnDraw ] whileTrue. errMorph setProperty: #errorOnDraw toValue: true. "Install the old error handler, so we can re-raise the error" rcvr error: err ] in WorldState>>displayWorldSafely: in Block: [ :err :rcvr | ... BlockClosure>>cull:cull: [ :ex | errorHandlerBlock cull: ex description cull: ex receiver ] in BlockClosure>>ifError: in Block: [ :ex | errorHandlerBlock cull: ex description cul...etc... BlockClosure>>cull: Context>>evaluateSignal: Context>>handleSignal: MessageNotUnderstood(Exception)>>signal UndefinedObject(Object)>>doesNotUnderstand: #finish WorldState>>displayWorld:submorphs: WorldMorph>>displayWorld [ aWorld displayWorld ] in WorldState>>displayWorldSafely: in Block: [ aWorld displayWorld ] BlockClosure>>on:do: BlockClosure>>ifError: WorldState>>displayWorldSafely: WorldState>>doOneCycleNowFor: WorldState>>doOneCycleFor: WorldMorph>>doOneCycle [ [ World doOneCycle. Processor yield. false ] whileFalse: [ ] ] in MorphicUIManager>>spawnNewProcess in Block: [ [ World doOneCycle.... [ self value. Processor terminateActive ] in BlockClosure>>newProcess in Block: [ self value.... [0mBuild step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 1

Build failed in Jenkins: Grease » 50,stable,vm #536
by ci-pharo-contribution＠inria.fr 05 Aug '16

05 Aug '16

See <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=50,VERSION=stable,V…> ------------------------------------------ Started by upstream project "Grease" build number 536 originally caused by: Started by timer Building remotely on pharo-contribution-linux64-3 (32 64 pharo-contribution-linux64-3.ci.inria.fr linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=50,VERSION=stable,V…> Deleting project workspace... Deleting old artifacts from #534 [vm] $ /bin/sh -xe /tmp/hudson4648150894441629551.sh + dirname Grease/PHARO=50,VERSION=stable,VM=vm + export JOB_NAME=Grease + bash + wget --quiet -O - get.pharo.org/50+vm Downloading the latest 50 Image: http://files.pharo.org/get-files/50/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/50/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV50.sources: http://files.pharo.org/get-files/50/sources.zip Creating starter scripts pharo and pharo-ui + ./pharo Pharo.image save Grease --delete-old + ./pharo Grease.image --version + REPO=http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main + ./pharo Grease.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfGrease --install=stable --group=Tests 'Installing ConfigurationOfGrease stable' [31mError: MessageNotUnderstood: receiver of "finish" is nil [0mUndefinedObject(Object)>>error: [ :err :rcvr | | errCtx errMorph | errCtx := thisContext. [ errCtx := errCtx sender. "Search the sender chain to find the morph causing the problem" [ errCtx notNil and: [ errCtx receiver isMorph not ] ] whileTrue: [ errCtx := errCtx sender ]. "If we're at the root of the context chain then we have a fatal drawing problem" errCtx ifNil: [ ^ self handleFatalDrawingError: err ]. errMorph := errCtx receiver. "If the morph causing the problem has already the #drawError flag set, then search for the next morph above in the caller chain." errMorph hasProperty: #errorOnDraw ] whileTrue. errMorph setProperty: #errorOnDraw toValue: true. "Install the old error handler, so we can re-raise the error" rcvr error: err ] in WorldState>>displayWorldSafely: in Block: [ :err :rcvr | ... BlockClosure>>cull:cull: [ :ex | errorHandlerBlock cull: ex description cull: ex receiver ] in BlockClosure>>ifError: in Block: [ :ex | errorHandlerBlock cull: ex description cul...etc... BlockClosure>>cull: Context>>evaluateSignal: Context>>handleSignal: MessageNotUnderstood(Exception)>>signal UndefinedObject(Object)>>doesNotUnderstand: #finish WorldState>>displayWorld:submorphs: WorldMorph>>displayWorld [ aWorld displayWorld ] in WorldState>>displayWorldSafely: in Block: [ aWorld displayWorld ] BlockClosure>>on:do: BlockClosure>>ifError: WorldState>>displayWorldSafely: WorldState>>doOneCycleNowFor: WorldState>>doOneCycleFor: WorldMorph>>doOneCycle [ [ World doOneCycle. Processor yield. false ] whileFalse: [ ] ] in MorphicUIManager>>spawnNewProcess in Block: [ [ World doOneCycle.... [ self value. Processor terminateActive ] in BlockClosure>>newProcess in Block: [ self value.... [0mBuild step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 1

Build failed in Jenkins: Grease » 30,stable,vm #535
by ci-pharo-contribution＠inria.fr 29 Jul '16

29 Jul '16

See <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=30,VERSION=stable,V…> ------------------------------------------ Started by upstream project "Grease" build number 535 originally caused by: Started by timer Building remotely on pharo-contribution-linux64-4.ci.inria.fr (32 64 linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=30,VERSION=stable,V…> Deleting project workspace... Deleting old artifacts from #533 [vm] $ /bin/sh -xe /tmp/hudson6287971464959925048.sh + dirname Grease/PHARO=30,VERSION=stable,VM=vm + export JOB_NAME=Grease + bash + wget --quiet -O - get.pharo.org/30+vm Downloading the latest 30 Image: http://files.pharo.org/get-files/30/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/30/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV30.sources: http://files.pharo.org/get-files/30/sources.zip Creating starter scripts pharo and pharo-ui + ./pharo Pharo.image save Grease --delete-old + ./pharo Grease.image --version + REPO=http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main + ./pharo Grease.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfGrease --install=stable --group=Tests 'Installing ConfigurationOfGrease stable' [31mError: Could not load ConfigurationOfGrease-JohanBrichau.335.mcz: ZnHttpUnsuccessful: 400 Bad Request [0mMCSmalltalkhubRepository(Object)>>error: MCSmalltalkhubRepository(MCHttpRepository)>>readStreamForFileNamed:do: in Block: [ :exception | self error: 'Could not load ' , aSt...etc... BlockClosure>>cull: MethodContext(ContextPart)>>handleSignal: in Block: [ self exceptionHandlerBlock cull: exception ] BlockClosure>>ensure: MethodContext(ContextPart)>>handleSignal: MethodContext(ContextPart)>>handleSignal: ZnHttpUnsuccessful(Exception)>>signal ZnClient>>handleResponse ZnClient>>executeWithRedirectsRemaining: ZnClient>>executeWithRetriesRemaining: in Block: [ self executeWithRedirectsRemaining: self maxNumb...etc... BlockClosure>>on:do: ZnClient>>executeWithRetriesRemaining: ZnClient>>executeWithTimeout in Block: [ self executeWithRetriesRemaining: self numberOfR...etc... BlockClosure>>on:do: ZnClient>>executeWithTimeout in Block: [ ... ZnClient>>withTimeoutDo: in Block: [ ^ block value ] ZnConnectionTimeout(DynamicVariable)>>value:during: in Block: [ ... BlockClosure>>ensure: ZnConnectionTimeout(DynamicVariable)>>value:during: ZnConnectionTimeout class(DynamicVariable class)>>value:during: ZnClient>>withTimeoutDo: ZnClient>>executeWithTimeout ZnClient>>execute in Block: [ result := self executeWithTimeout ] ZnClient>>withProgressDo: in Block: [ ^ block value ] ZnSignalProgress(DynamicVariable)>>value:during: in Block: [ ... BlockClosure>>ensure: ZnSignalProgress(DynamicVariable)>>value:during: ZnSignalProgress class(DynamicVariable class)>>value:during: ZnClient>>withProgressDo: [0mBuild step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 1

Build failed in Jenkins: Grease » 30,development,vm #535
by ci-pharo-contribution＠inria.fr 29 Jul '16

29 Jul '16

See <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=30,VERSION=developm…> ------------------------------------------ Started by upstream project "Grease" build number 535 originally caused by: Started by timer Building remotely on pharo-contribution-linux64-3 (32 64 pharo-contribution-linux64-3.ci.inria.fr linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=30,VERSION=developm…> Deleting project workspace... Deleting old artifacts from #533 [vm] $ /bin/sh -xe /tmp/hudson6606171163524418739.sh + dirname Grease/PHARO=30,VERSION=development,VM=vm + export JOB_NAME=Grease + bash + wget --quiet -O - get.pharo.org/30+vm Downloading the latest 30 Image: http://files.pharo.org/get-files/30/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/30/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV30.sources: http://files.pharo.org/get-files/30/sources.zip Creating starter scripts pharo and pharo-ui + ./pharo Pharo.image save Grease --delete-old + ./pharo Grease.image --version + REPO=http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main + ./pharo Grease.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfGrease --install=development --group=Tests 'Installing ConfigurationOfGrease development' [31mError: Could not access http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main/: ZnHttpUnsuccessful: 400 Bad Request [0mMCSmalltalkhubRepository(Object)>>error: MCSmalltalkhubRepository>>loadAllFileNames in Block: [ :exception | self error: 'Could not access ' , s...etc... BlockClosure>>cull: MethodContext(ContextPart)>>handleSignal: in Block: [ self exceptionHandlerBlock cull: exception ] BlockClosure>>ensure: MethodContext(ContextPart)>>handleSignal: MethodContext(ContextPart)>>handleSignal: ZnHttpUnsuccessful(Exception)>>signal ZnClient>>handleResponse ZnClient>>executeWithRedirectsRemaining: ZnClient>>executeWithRetriesRemaining: in Block: [ self executeWithRedirectsRemaining: self maxNumb...etc... BlockClosure>>on:do: ZnClient>>executeWithRetriesRemaining: ZnClient>>executeWithTimeout in Block: [ self executeWithRetriesRemaining: self numberOfR...etc... BlockClosure>>on:do: ZnClient>>executeWithTimeout in Block: [ ... ZnClient>>withTimeoutDo: in Block: [ ^ block value ] ZnConnectionTimeout(DynamicVariable)>>value:during: in Block: [ ... BlockClosure>>ensure: ZnConnectionTimeout(DynamicVariable)>>value:during: ZnConnectionTimeout class(DynamicVariable class)>>value:during: ZnClient>>withTimeoutDo: ZnClient>>executeWithTimeout ZnClient>>execute in Block: [ result := self executeWithTimeout ] ZnClient>>withProgressDo: in Block: [ ^ block value ] ZnSignalProgress(DynamicVariable)>>value:during: in Block: [ ... BlockClosure>>ensure: ZnSignalProgress(DynamicVariable)>>value:during: ZnSignalProgress class(DynamicVariable class)>>value:during: ZnClient>>withProgressDo: [0mBuild step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 1

Build failed in Jenkins: Grease » 40,bleedingEdge,vm #535
by ci-pharo-contribution＠inria.fr 29 Jul '16

29 Jul '16

See <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=40,VERSION=bleeding…> ------------------------------------------ Started by upstream project "Grease" build number 535 originally caused by: Started by timer Building remotely on pharo-contribution-linux64-4.ci.inria.fr (32 64 linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=40,VERSION=bleeding…> Deleting project workspace... Deleting old artifacts from #533 [vm] $ /bin/sh -xe /tmp/hudson7037085777019223358.sh + dirname Grease/PHARO=40,VERSION=bleedingEdge,VM=vm + export JOB_NAME=Grease + wget --quiet+ -O - get.pharo.org/40+vm bash Downloading the latest 40 Image: http://files.pharo.org/get-files/40/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/40/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV40.sources: http://files.pharo.org/get-files/40/sources.zip Creating starter scripts pharo and pharo-ui + ./pharo Pharo.image save Grease --delete-old + ./pharo Grease.image --version + REPO=http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main + ./pharo Grease.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfGrease --install=bleedingEdge --group=Tests 'Installing ConfigurationOfGrease bleedingEdge' [31m==== Startup Error: Error: Could not load ConfigurationOfGrease-JohanBrichau.335.mcz: ZnHttpUnsuccessful: 400 Bad Request [0mMCSmalltalkhubRepository(Object)>>error: [ :exception | self error: 'Could not load ' , aString , ': ' , exception printString ] in [ client := self httpClient. client ifFail: [ :exception | self error: 'Could not load ' , aString , ': ' , exception printString ]; get: (self urlForFileNamed: aString). self assertBinaryResponse: client response. "immediately cache the version and avoid an unnecessary serialization" self cacheRawVersionNamed: aString stream: client contents ] in MCSmalltalkhubRepository(MCHttpRepository)>>readStreamForFileNamed:do: in Block: [ :exception | self error: 'Could not load ' , aSt...etc... BlockClosure>>cull: Context>>evaluateSignal: Context>>handleSignal: Context>>handleSignal: ZnHttpUnsuccessful(Exception)>>signal ZnClient>>handleResponse ZnClient>>executeWithRedirectsRemaining: [ self executeWithRedirectsRemaining: self maxNumberOfRedirects ] in ZnClient>>executeWithRetriesRemaining: in Block: [ self executeWithRedirectsRemaining: self maxNumb...etc... BlockClosure>>on:do: ZnClient>>executeWithRetriesRemaining: [ self executeWithRetriesRemaining: self numberOfRetries ] in [ [ self executeWithRetriesRemaining: self numberOfRetries ] on: Error do: self ifFailBlock ] in ZnClient>>executeWithTimeout in Block: [ self executeWithRetriesRemaining: self numberOfR...etc... BlockClosure>>on:do: [ [ self executeWithRetriesRemaining: self numberOfRetries ] on: Error do: self ifFailBlock ] in ZnClient>>executeWithTimeout in Block: [ ... [ ^ block value ] in ZnClient>>withTimeoutDo: in Block: [ ^ block value ] [ p psValueAt: index put: anObject. aBlock value ] in ZnConnectionTimeout(DynamicVariable)>>value:during: in Block: [ ... BlockClosure>>ensure: ZnConnectionTimeout(DynamicVariable)>>value:during: ZnConnectionTimeout class(DynamicVariable class)>>value:during: ZnClient>>withTimeoutDo: ZnClient>>executeWithTimeout [ result := self executeWithTimeout ] in ZnClient>>execute in Block: [ result := self executeWithTimeout ] [ ^ block value ] in ZnClient>>withProgressDo: in Block: [ ^ block value ] [ p psValueAt: index put: anObject. aBlock value ] in ZnSignalProgress(DynamicVariable)>>value:during: in Block: [ ... BlockClosure>>ensure: ZnSignalProgress(DynamicVariable)>>value:during: ZnSignalProgress class(DynamicVariable class)>>value:during: ZnClient>>withProgressDo: ZnClient>>execute [0m[31mGot startup errors: [0m[31m Error: Could not load ConfigurationOfGrease-JohanBrichau.335.mcz: ZnHttpUnsuccessful: 400 Bad Request [0mBuild step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 1

magritte extras
by Sean Glazier 27 Jul '16

27 Jul '16

I am looking at creating a tool that works like the magritte example. It uses Magritte-XMLBinding. I ran the tests and had a small number of failures in Magritte-Tests-XMLBinding. The example class MADescriptionEditor is in the examples tag of the Magritte-Seaside package. It came from Repository: http://smalltalkhub.com/mc/Magritte/Magritte3/main/ and the XML binding for the examples comes from Repository: http://smalltalkhub.com/mc/Magritte/Magritte3Addons/main/ So if someone has these working and playing together that would be great. If it is outdated and we are to use something else I would like to know what the preferred way is so I can build the example building the descriptions using I guess json. Many thanks :-) Kind Regards, Sean Glazier

1 0

magritte extras
by Sean Glazier 26 Jul '16

26 Jul '16

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

seaside-dev July 2016