seaside-dev March 2016

seaside-dev@lists.squeakfoundation.org

8 participants
17 discussions

"Bootstrap" project for Seaside with separated Magritte support in a new project "BootstrapMagritte" on STHub
by Torsten Bergmann 16 Jul '18

16 Jul '18

Hi, The bundling with magritte polluted the repo and the Bootstrap project with stuff that was not really needed for "Seaside + Bootstrap" only. Also a "Bootstrap-Demo" package appeared that was more a demo for magritte than for Bootstrap. Since there already was an "Bootstrap-Examples" package this added more confusion (at least on my side). I now took action and cleaned up the Bootstrap project again to remove the magritte stuff. If one wants to to use Bootstrap with Seaside he does not necessarily have to go the Magritte path, so IMHO this was necessary. The magritte stuff for Bootstrap is now hosted as an own separate project on STHub which would also help to see to which part code additions really belong. As a result: ============ 1. The Bootstrap project now again only contains and loads the initial three packages: - Bootstrap-Core - Bootstrap-Tests-Core - Bootstrap-Examples assembled by the known ConfigurationOfBootstrap 2. The Magritte support on top of Bootstrap is now separated in an own project to avoid too much mixin. See "BootstrapMagritte" on SmalltalkHub. The new repo "http://smalltalkhub.com/#!/~TorstenBergmann/BootstrapMagritte" has the same commiters as the old one, so feel free to continue with your work. This project includes two packages: - Bootstrap-Magritte-Core (former Bootstrap-Magritte) - Bootstrap-Magritte-Examples (former Bootstrap-Demo) assembled by a new ConfigurationOfBootstrapMagritte for this particular project 3. The Bootstrap/ConfigurationOfBootstrap is now available as - a release version 0.4.0 for Seaside 3.0.9 - a release version 0.5.0 for Seaside 3.0.10 - a release version 0.6.0 for Seaside 3.1.0 (#stable) - a development version 0.7.0 for Seaside 3.1.0 for new stuff 4. The CI for Bootstrap is green for Pharo 2.0 and now also Pharo 3.0 5. The config browser is updated for Pharo 2.0 and Pharo 3.0 with the "Bootstrap" package So you can now also open a fresh Pharo 3.0 image, open World menu -> Configuration Browser to load "Bootstrap". Then run ZnZincServerAdaptor startOn: 8080 and start coding your web application with the latest Seaside 3.1.0. Next steps: Setting up a CI for the new project "BootstrapMagritte"/ConfigurationOfBootstrapMagritte Have fun! Bye Torsten

3 7

Release 3.2.0
by Johan Brichau 23 Aug '16

23 Aug '16

Hi Philippe, Dale, Stephan, Esteban and other contributors, I propose to release 3.2.0 as it is right now [1]. What do you think? Anything missing? The new website and reworking Seaside Welcome + Config can be postponed. Though the new website is the next thing on my stack. At the same time, I want to propose that the github repository becomes the main repository. I’ve been setting up Grease and Seaside on github with the SmalltalkCI and it’s very nice to have that test coverage on all platforms [2]. It also means we can have a more organised way of contributions via pull requests and feature branches. Any opinions? Perhaps I should write up a small page on how contributing would work (technically) for those who are not into Smalltalk+Git cheers Johan [1] https://ci.inria.fr/pharo-contribution/job/Seaside/ <https://ci.inria.fr/pharo-contribution/job/Seaside/> [2] https://travis-ci.org/SeasideSt/Seaside/builds <https://travis-ci.org/SeasideSt/Seaside/builds>

3 7

Build failed in Jenkins: Seaside » 50,release3.0,vm #758
by ci-pharo-contribution＠inria.fr 04 Apr '16

04 Apr '16

1 1

Build failed in Jenkins: Grease » 20,bleedingEdge,vm #517
by ci-pharo-contribution＠inria.fr 01 Apr '16

01 Apr '16

See <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=20,VERSION=bleeding…> ------------------------------------------ Started by upstream project "Grease" build number 517 originally caused by: [URLTrigger] A change within the response URL invocation (log) Building remotely on pharo-contribution-linux64-4.ci.inria.fr (32 64 linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=20,VERSION=bleeding…> Deleting project workspace... Deleting old artifacts from #515 [vm] $ /bin/sh -xe /tmp/hudson2366019863432563145.sh + dirname Grease/PHARO=20,VERSION=bleedingEdge,VM=vm + export JOB_NAME=Grease + wget --quiet -O - get.pharo.org/20+vm + bash Downloading the latest 20 Image: http://files.pharo.org/get-files/20/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/20/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV20.sources: http://files.pharo.org/get-files/20/sources.zip Creating starter scripts pharo and pharo-ui + ./pharo Pharo.image save Grease --delete-old + ./pharo Grease.image --version + REPO=http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main + ./pharo Grease.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfGrease --install=bleedingEdge --group=Tests [31m[33m =============================================================================== Notice: Installing ConfigurationOfGrease bleedingEdge =============================================================================== [0m[0m[31m==== Startup Error: Error: Could not resolve: ConfigurationOfRefactoringBrowser [ConfigurationOfRefactoringBrowser] in <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=20,VERSION=bleeding…> http://www.squeaksource.com/MetacelloRepository ERROR: 'GoferRepositoryError: Could not access http://www.squeaksource.com/MetacelloRepository: ZnHttpUnsuccessful: 503 Service Temporarily Unavailable' [0mMetacelloFetchingMCSpecLoader(Object)>>error: MetacelloFetchingMCSpecLoader(MetacelloCommonMCSpecLoader)>>retryingResolvePackageSpecReferences:gofer: MetacelloFetchingMCSpecLoader>>linearLoadPackageSpec:gofer: in Block: [| references nearestReference cachedReference ext...etc... MetacelloPharoPlatform>>do:displaying: in Block: [aBlock value] BlockClosure>>ensure: RPackageSet class>>withCacheDo: MetacelloPharoPlatform>>do:displaying: in Block: [:bar | ... BlockClosure>>cull: Job>>run in Block: [result := block cull: self] BlockClosure>>on:do: Job>>run in Block: [self prepareForRunning.... BlockClosure>>ensure: Job>>run NonInteractiveUIManager(UIManager)>>displayProgress:from:to:during: ByteString(String)>>displayProgressFrom:to:during: MetacelloPharoPlatform>>do:displaying: MetacelloFetchingMCSpecLoader>>linearLoadPackageSpec:gofer: MetacelloPackageSpec>>loadUsing:gofer: MetacelloFetchingMCSpecLoader(MetacelloCommonMCSpecLoader)>>linearLoadPackageSpecs:repositories: in Block: [:pkg | pkg loadUsing: self gofer: gofer] Array(SequenceableCollection)>>do: MetacelloFetchingMCSpecLoader(MetacelloCommonMCSpecLoader)>>linearLoadPackageSpecs:repositories: MetacelloFetchingMCSpecLoader>>explicitLoadPackageSpecs:repositories: in Block: [super linearLoadPackageSpecs: packageSpecs reposi...etc... BlockClosure>>ensure: MetacelloLoaderPolicy>>pushLoadDirective:during: MetacelloLoaderPolicy>>pushExplicitLoadDirectivesDuring:for: MetacelloFetchingMCSpecLoader>>explicitLoadPackageSpecs:repositories: MetacelloPackageSpec>>explicitLoadUsing: MetacelloPackageSpec>>loadUsing: in Block: [self explicitLoadUsing: mcLoader] MetacelloLoadingMCSpecLoader(MetacelloCommonMCSpecLoader)>>doingLoads: MetacelloPackageSpec>>loadUsing: [0m[31mGot startup errors: [0m[31m Error: Could not resolve: ConfigurationOfRefactoringBrowser [ConfigurationOfRefactoringBrowser] in <https://ci.inria.fr/pharo-contribution/job/Grease/PHARO=20,VERSION=bleeding…> http://www.squeaksource.com/MetacelloRepository ERROR: 'GoferRepositoryError: Could not access http://www.squeaksource.com/MetacelloRepository: ZnHttpUnsuccessful: 503 Service Temporarily Unavailable' [0mBuild step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 1

Jenkins build became unstable: Seaside » 40,bleedingEdge,vm #768
by ci-pharo-contribution＠inria.fr 26 Mar '16

26 Mar '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=bleedin…>

1 1

Jenkins build became unstable: Seaside » 40,development,vm #768
by ci-pharo-contribution＠inria.fr 26 Mar '16

26 Mar '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=develop…>

1 1

Jenkins build became unstable: Seaside » 50,development,vm #768
by ci-pharo-contribution＠inria.fr 26 Mar '16

26 Mar '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=50,VERSION=develop…>

1 1

Jenkins build became unstable: Seaside » 50,bleedingEdge,vm #768
by ci-pharo-contribution＠inria.fr 26 Mar '16

26 Mar '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=50,VERSION=bleedin…>

1 1

MultiSelect control using scriptaculous not working
by Jayalakshmi Lade 21 Mar '16

21 Mar '16

Hi, In pharo2.0 multiselect control using Scriptaculous is not working that is not showing multiple values which are selected in the multiselect control. I have loaded the same project mczs in latest pharo4.0 environment, even here it is not working. Please provide me your valuable suggestions on this. *Thanks,* *Jayalakshmi L*

2 1

Jenkins build is unstable: Seaside » 50,release3.1,vm #758
by ci-pharo-contribution＠inria.fr 20 Mar '16

20 Mar '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=50,VERSION=release…>

1 5

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

seaside-dev March 2016