seaside-dev November 2015

seaside-dev@lists.squeakfoundation.org

6 participants
7 discussions

"Bootstrap" project for Seaside with separated Magritte support in a new project "BootstrapMagritte" on STHub
by Torsten Bergmann 16 Jul '18

16 Jul '18

Hi, The bundling with magritte polluted the repo and the Bootstrap project with stuff that was not really needed for "Seaside + Bootstrap" only. Also a "Bootstrap-Demo" package appeared that was more a demo for magritte than for Bootstrap. Since there already was an "Bootstrap-Examples" package this added more confusion (at least on my side). I now took action and cleaned up the Bootstrap project again to remove the magritte stuff. If one wants to to use Bootstrap with Seaside he does not necessarily have to go the Magritte path, so IMHO this was necessary. The magritte stuff for Bootstrap is now hosted as an own separate project on STHub which would also help to see to which part code additions really belong. As a result: ============ 1. The Bootstrap project now again only contains and loads the initial three packages: - Bootstrap-Core - Bootstrap-Tests-Core - Bootstrap-Examples assembled by the known ConfigurationOfBootstrap 2. The Magritte support on top of Bootstrap is now separated in an own project to avoid too much mixin. See "BootstrapMagritte" on SmalltalkHub. The new repo "http://smalltalkhub.com/#!/~TorstenBergmann/BootstrapMagritte" has the same commiters as the old one, so feel free to continue with your work. This project includes two packages: - Bootstrap-Magritte-Core (former Bootstrap-Magritte) - Bootstrap-Magritte-Examples (former Bootstrap-Demo) assembled by a new ConfigurationOfBootstrapMagritte for this particular project 3. The Bootstrap/ConfigurationOfBootstrap is now available as - a release version 0.4.0 for Seaside 3.0.9 - a release version 0.5.0 for Seaside 3.0.10 - a release version 0.6.0 for Seaside 3.1.0 (#stable) - a development version 0.7.0 for Seaside 3.1.0 for new stuff 4. The CI for Bootstrap is green for Pharo 2.0 and now also Pharo 3.0 5. The config browser is updated for Pharo 2.0 and Pharo 3.0 with the "Bootstrap" package So you can now also open a fresh Pharo 3.0 image, open World menu -> Configuration Browser to load "Bootstrap". Then run ZnZincServerAdaptor startOn: 8080 and start coding your web application with the latest Seaside 3.1.0. Next steps: Setting up a CI for the new project "BootstrapMagritte"/ConfigurationOfBootstrapMagritte Have fun! Bye Torsten

3 7

squeak 5 build
by Johan Brichau 29 Nov '15

29 Nov '15

Hi Tobias, The squeak 5 build on travis fails because of a timeout [1]. Though source.squeak.org <http://source.squeak.org/> appears online. could you check this out? [1] https://travis-ci.org/SeasideSt/Seaside/jobs/93688762 <https://travis-ci.org/SeasideSt/Seaside/jobs/93688762> thanks! Johan

1 0

Build failed in Jenkins: Seaside » 20,release3.0,vm #726
by ci-pharo-contribution＠inria.fr 23 Nov '15

23 Nov '15

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=20,VERSION=release…> ------------------------------------------ Started by upstream project "Seaside" build number 726 originally caused by: Started by upstream project "Grease" build number 497 originally caused by: Started by timer Building remotely on pharo-contribution-linux64-4.ci.inria.fr (32 64 linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=20,VERSION=release…> Deleting project workspace... Deleting old artifacts from #724 [vm] $ /bin/sh -xe /tmp/hudson2451182834614753914.sh + dirname Seaside/PHARO=20,VERSION=release3.0,VM=vm + export JOB_NAME=Seaside + bash + wget --quiet -O - get.pharo.org/20+vm Downloading the latest 20 Image: http://files.pharo.org/get-files/20/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/20/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV20.sources: http://files.pharo.org/get-files/20/sources.zip Creating starter scripts pharo and pharo-ui + ./pharo Pharo.image save Seaside --delete-old + ./pharo Seaside.image --version + REPO=http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main + ./pharo Seaside.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfSeaside3 --install=release3.0 --group=CI [31m[33m =============================================================================== Notice: Installing ConfigurationOfSeaside3 release3.0 =============================================================================== [0m[0m[31m==== Startup Error: GoferRepositoryError: Could not access http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main: ZnHttpUnsuccessful: 400 Bad Request [0mMCHttpRepository(MCFileBasedRepository)>>goferReferences in Block: [:error | ^ GoferRepositoryError signal: error mes...etc... BlockClosure>>cull: MethodContext(ContextPart)>>handleSignal: in Block: [self exceptionHandlerBlock cull: exception] BlockClosure>>ensure: MethodContext(ContextPart)>>handleSignal: MethodContext(ContextPart)>>handleSignal: MethodContext(ContextPart)>>handleSignal: MethodContext(ContextPart)>>handleSignal: MethodContext(ContextPart)>>handleSignal: MCRepositoryError(Exception)>>signal MCRepositoryError(Exception)>>signal: MCRepositoryError class(Exception class)>>signal: MCHttpRepository>>loadAllFileNames in Block: [:exception | (exception className beginsWith: 'Zn...etc... BlockClosure>>cull: MethodContext(ContextPart)>>handleSignal: in Block: [self exceptionHandlerBlock cull: exception] BlockClosure>>ensure: MethodContext(ContextPart)>>handleSignal: MethodContext(ContextPart)>>handleSignal: ZnHttpUnsuccessful(Exception)>>signal ZnClient>>handleResponse ZnClient>>executeWithRedirectsRemaining: ZnClient>>executeWithRetriesRemaining: in Block: [self executeWithRedirectsRemaining: self maxNumbe...etc... BlockClosure>>on:do: ZnClient>>executeWithRetriesRemaining: ZnClient>>executeWithTimeout in Block: [self executeWithRetriesRemaining: self numberOfRe...etc... BlockClosure>>on:do: ZnClient>>executeWithTimeout in Block: [[self executeWithRetriesRemaining: self numberOfR...etc... ZnClient>>withTimeoutDo: in Block: [^ block value] ZnConnectionTimeout(DynamicVariable)>>value:during: in Block: [p psValueAt: index put: anObject.... BlockClosure>>ensure: [0m[31mGot startup errors: [0m[31m GoferRepositoryError: Could not access http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main: ZnHttpUnsuccessful: 400 Bad Request [0mBuild step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 1

Squeak5 builds on Travis CI?
by Johan Brichau 11 Nov '15

11 Nov '15

Hi, I tried adding squeak5 to the line-up, but it fails [1]. I remember there was an issue for running Travis builds with Squeak 5 but I cannot locate it anymore. Does anyone know what the status i? [1] https://travis-ci.org/SeasideSt/Seaside/builds/90490438 <https://travis-ci.org/SeasideSt/Seaside/builds/90490438>

2 2

How to send email from seaside web application using gmail smtp server
by Jayalakshmi Lade 11 Nov '15

11 Nov '15

Hi, I want to send an email using gmail smtp server from my seaside web application to any email id, for that in workspace I used below code, username:= 'test(a)gmail.com'. password:='admin'. client := SMTPClient openOnHostNamed: 'smtp.gmail.com' port: 465. client user: username; password: password; login; initiateSession. client mailFrom: 'test(a)gmail.com'; recipient: 'jayal(a)gmail.com'; data: 'Subject: Hello from SMTPClient! From: test(a)gmail.com To: jayal(a)gmail.com Sending from SMTPClient!'. client quit. when I inspect getting this error: *"Connection closed: Connection closed while waiting for data".* Can anyone please help on this? Looking forward for your suggestions. *Thanks,* *Jaya L*

4 3

Build failed in Jenkins: Seaside » 40,development,vm #720
by ci-pharo-contribution＠inria.fr 09 Nov '15

09 Nov '15

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=develop…> ------------------------------------------ Started by upstream project "Seaside" build number 720 originally caused by: Started by upstream project "Grease" build number 493 originally caused by: Started by timer Building remotely on pharo-contribution-linux64-4.ci.inria.fr (32 64 linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=develop…> Deleting project workspace... Deleting old artifacts from #718 [vm] $ /bin/sh -xe /tmp/hudson1286681657787256451.sh + dirname Seaside/PHARO=40,VERSION=development,VM=vm + export JOB_NAME=Seaside + wget --quiet -O - get.pharo.org/40+vm + bash Downloading the latest 40 Image: http://files.pharo.org/get-files/40/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/40/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV40.sources: http://files.pharo.org/get-files/40/sources.zip Creating starter scripts pharo and pharo-ui + ./pharo Pharo.image save Seaside --delete-old + ./pharo Seaside.image --version + REPO=http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main + ./pharo Seaside.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfSeaside3 --install=development --group=CI 'Installing ConfigurationOfSeaside3 development' [31m==== Startup Error: Error: Could not access http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main/: ZnHttpUnsuccessful: 400 Bad Request [0mMCSmalltalkhubRepository(Object)>>error: [ :exception | self error: 'Could not access ' , self location , ': ' , exception printString ] in MCSmalltalkhubRepository>>loadAllFileNames in Block: [ :exception | self error: 'Could not access ' , s...etc... BlockClosure>>cull: Context>>evaluateSignal: Context>>handleSignal: Context>>handleSignal: ZnHttpUnsuccessful(Exception)>>signal ZnClient>>handleResponse ZnClient>>executeWithRedirectsRemaining: [ self executeWithRedirectsRemaining: self maxNumberOfRedirects ] in ZnClient>>executeWithRetriesRemaining: in Block: [ self executeWithRedirectsRemaining: self maxNumb...etc... BlockClosure>>on:do: ZnClient>>executeWithRetriesRemaining: [ self executeWithRetriesRemaining: self numberOfRetries ] in [ [ self executeWithRetriesRemaining: self numberOfRetries ] on: Error do: self ifFailBlock ] in ZnClient>>executeWithTimeout in Block: [ self executeWithRetriesRemaining: self numberOfR...etc... BlockClosure>>on:do: [ [ self executeWithRetriesRemaining: self numberOfRetries ] on: Error do: self ifFailBlock ] in ZnClient>>executeWithTimeout in Block: [ ... [ ^ block value ] in ZnClient>>withTimeoutDo: in Block: [ ^ block value ] [ p psValueAt: index put: anObject. aBlock value ] in ZnConnectionTimeout(DynamicVariable)>>value:during: in Block: [ ... BlockClosure>>ensure: ZnConnectionTimeout(DynamicVariable)>>value:during: ZnConnectionTimeout class(DynamicVariable class)>>value:during: ZnClient>>withTimeoutDo: ZnClient>>executeWithTimeout [ result := self executeWithTimeout ] in ZnClient>>execute in Block: [ result := self executeWithTimeout ] [ ^ block value ] in ZnClient>>withProgressDo: in Block: [ ^ block value ] [ p psValueAt: index put: anObject. aBlock value ] in ZnSignalProgress(DynamicVariable)>>value:during: in Block: [ ... BlockClosure>>ensure: ZnSignalProgress(DynamicVariable)>>value:during: ZnSignalProgress class(DynamicVariable class)>>value:during: ZnClient>>withProgressDo: ZnClient>>execute [0m[31mGot startup errors: [0m[31m Error: Could not access http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main/: ZnHttpUnsuccessful: 400 Bad Request [0mBuild step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 1

accessor for "async" attribute of Script tag
by Chris Muller 05 Nov '15

05 Nov '15

Adds a convenience method (analagous to #defer) for "async" scripts. See: http://www.w3.org/TR/html5/scripting-1.html#attr-script-async

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

seaside-dev November 2015