seaside-dev October 2016

seaside-dev@lists.squeakfoundation.org

3 participants
25 discussions

"Bootstrap" project for Seaside with separated Magritte support in a new project "BootstrapMagritte" on STHub
by Torsten Bergmann 16 Jul '18

16 Jul '18

Hi, The bundling with magritte polluted the repo and the Bootstrap project with stuff that was not really needed for "Seaside + Bootstrap" only. Also a "Bootstrap-Demo" package appeared that was more a demo for magritte than for Bootstrap. Since there already was an "Bootstrap-Examples" package this added more confusion (at least on my side). I now took action and cleaned up the Bootstrap project again to remove the magritte stuff. If one wants to to use Bootstrap with Seaside he does not necessarily have to go the Magritte path, so IMHO this was necessary. The magritte stuff for Bootstrap is now hosted as an own separate project on STHub which would also help to see to which part code additions really belong. As a result: ============ 1. The Bootstrap project now again only contains and loads the initial three packages: - Bootstrap-Core - Bootstrap-Tests-Core - Bootstrap-Examples assembled by the known ConfigurationOfBootstrap 2. The Magritte support on top of Bootstrap is now separated in an own project to avoid too much mixin. See "BootstrapMagritte" on SmalltalkHub. The new repo "http://smalltalkhub.com/#!/~TorstenBergmann/BootstrapMagritte" has the same commiters as the old one, so feel free to continue with your work. This project includes two packages: - Bootstrap-Magritte-Core (former Bootstrap-Magritte) - Bootstrap-Magritte-Examples (former Bootstrap-Demo) assembled by a new ConfigurationOfBootstrapMagritte for this particular project 3. The Bootstrap/ConfigurationOfBootstrap is now available as - a release version 0.4.0 for Seaside 3.0.9 - a release version 0.5.0 for Seaside 3.0.10 - a release version 0.6.0 for Seaside 3.1.0 (#stable) - a development version 0.7.0 for Seaside 3.1.0 for new stuff 4. The CI for Bootstrap is green for Pharo 2.0 and now also Pharo 3.0 5. The config browser is updated for Pharo 2.0 and Pharo 3.0 with the "Bootstrap" package So you can now also open a fresh Pharo 3.0 image, open World menu -> Configuration Browser to load "Bootstrap". Then run ZnZincServerAdaptor startOn: 8080 and start coding your web application with the latest Seaside 3.1.0. Next steps: Setting up a CI for the new project "BootstrapMagritte"/ConfigurationOfBootstrapMagritte Have fun! Bye Torsten

3 7

Build failed in Jenkins: Seaside » 30,release3.2,vm #847
by ci-pharo-contribution＠inria.fr 04 Nov '16

04 Nov '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=30,VERSION=release…> ------------------------------------------ Started by upstream project "Seaside" build number 847 originally caused by: Started by timer Building remotely on pharo-contribution-ubuntu16-04 (32 64 ubuntu linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=30,VERSION=release…> Deleting project workspace... Deleting old artifacts from #845 [vm] $ /bin/sh -xe /tmp/hudson1210499538951058488.sh + dirname Seaside/PHARO=30,VERSION=release3.2,VM=vm + export JOB_NAME=Seaside + bash + wget --quiet -O - get.pharo.org/30+vm Downloading the latest 30 Image: http://files.pharo.org/get-files/30/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/30/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV30.sources: http://files.pharo.org/get-files/30/sources.zip Creating starter scripts pharo and pharo-ui On a 64-bit system? You must install the 32-bit libraries Try `sudo aptitude install ia32-libs` or see http://pharo.org/gnu-linux-installation#64-bit-System-Setup for more info + ./pharo Pharo.image save Seaside --delete-old ./pharo: line 11: <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=30,VERSION=release…>: No such file or directory Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 1

Build failed in Jenkins: Seaside » 30,release3.1,vm #846
by ci-pharo-contribution＠inria.fr 04 Nov '16

04 Nov '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=30,VERSION=release…> ------------------------------------------ Started by upstream project "Seaside" build number 846 originally caused by: Started by timer Building remotely on pharo-contribution-ubuntu16-04 (32 64 ubuntu linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=30,VERSION=release…> Deleting project workspace... Deleting old artifacts from #844 [vm] $ /bin/sh -xe /tmp/hudson7106067315027127710.sh + dirname Seaside/PHARO=30,VERSION=release3.1,VM=vm + export JOB_NAME=Seaside + wget --quiet -O - get.pharo.org/30+vm + bash Downloading the latest 30 Image: http://files.pharo.org/get-files/30/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/30/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV30.sources: http://files.pharo.org/get-files/30/sources.zip Creating starter scripts pharo and pharo-ui On a 64-bit system? You must install the 32-bit libraries Try `sudo aptitude install ia32-libs` or see http://pharo.org/gnu-linux-installation#64-bit-System-Setup for more info + ./pharo Pharo.image save Seaside --delete-old ./pharo: line 11: <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=30,VERSION=release…>: No such file or directory Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 2

Build failed in Jenkins: Seaside » 40,release3.1,vm #846
by ci-pharo-contribution＠inria.fr 04 Nov '16

04 Nov '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=release…> ------------------------------------------ Started by upstream project "Seaside" build number 846 originally caused by: Started by timer Building remotely on pharo-contribution-ubuntu16-04 (32 64 ubuntu linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=release…> Deleting project workspace... Deleting old artifacts from #844 [vm] $ /bin/sh -xe /tmp/hudson8915904683199984246.sh + dirname Seaside/PHARO=40,VERSION=release3.1,VM=vm + export JOB_NAME=Seaside + wget --quiet -O - get.pharo.org/40+vm + bash Downloading the latest 40 Image: http://files.pharo.org/get-files/40/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/40/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV40.sources: http://files.pharo.org/get-files/40/sources.zip Creating starter scripts pharo and pharo-ui On a 64-bit system? You must install the 32-bit libraries Try `sudo aptitude install ia32-libs` or see http://pharo.org/gnu-linux-installation#64-bit-System-Setup for more info + ./pharo Pharo.image save Seaside --delete-old ./pharo: line 11: <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=release…>: No such file or directory Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 2

Build failed in Jenkins: Seaside » 40,development,vm #846
by ci-pharo-contribution＠inria.fr 04 Nov '16

04 Nov '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=develop…> ------------------------------------------ Started by upstream project "Seaside" build number 846 originally caused by: Started by timer Building remotely on pharo-contribution-ubuntu16-04 (32 64 ubuntu linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=develop…> Deleting project workspace... Deleting old artifacts from #844 [vm] $ /bin/sh -xe /tmp/hudson984804500103448752.sh + dirname Seaside/PHARO=40,VERSION=development,VM=vm + export JOB_NAME=Seaside + wget --quiet -O - get.pharo.org/40+vm+ bash Downloading the latest 40 Image: http://files.pharo.org/get-files/40/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/40/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV40.sources: http://files.pharo.org/get-files/40/sources.zip Creating starter scripts pharo and pharo-ui On a 64-bit system? You must install the 32-bit libraries Try `sudo aptitude install ia32-libs` or see http://pharo.org/gnu-linux-installation#64-bit-System-Setup for more info + ./pharo Pharo.image save Seaside --delete-old ./pharo: line 11: <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=develop…>: No such file or directory Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 2

Build failed in Jenkins: Seaside » 40,release3.2,vm #847
by ci-pharo-contribution＠inria.fr 04 Nov '16

04 Nov '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=release…> ------------------------------------------ Started by upstream project "Seaside" build number 847 originally caused by: Started by timer Building remotely on pharo-contribution-ubuntu16-04 (32 64 ubuntu linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=release…> Deleting project workspace... Deleting old artifacts from #845 [vm] $ /bin/sh -xe /tmp/hudson8065623479314602032.sh + dirname Seaside/PHARO=40,VERSION=release3.2,VM=vm + export JOB_NAME=Seaside + + bash wget --quiet -O - get.pharo.org/40+vm Downloading the latest 40 Image: http://files.pharo.org/get-files/40/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/40/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV40.sources: http://files.pharo.org/get-files/40/sources.zip Creating starter scripts pharo and pharo-ui On a 64-bit system? You must install the 32-bit libraries Try `sudo aptitude install ia32-libs` or see http://pharo.org/gnu-linux-installation#64-bit-System-Setup for more info + ./pharo Pharo.image save Seaside --delete-old ./pharo: line 11: <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=release…>: No such file or directory Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 1

Build failed in Jenkins: Seaside » 40,release3.0,vm #846
by ci-pharo-contribution＠inria.fr 04 Nov '16

04 Nov '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=release…> ------------------------------------------ Started by upstream project "Seaside" build number 846 originally caused by: Started by timer Building remotely on pharo-contribution-ubuntu16-04 (32 64 ubuntu linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=release…> Deleting project workspace... Deleting old artifacts from #844 [vm] $ /bin/sh -xe /tmp/hudson3831659027889136109.sh + dirname Seaside/PHARO=40,VERSION=release3.0,VM=vm + export JOB_NAME=Seaside + + wget --quiet -O - get.pharo.org/40+vm bash Downloading the latest 40 Image: http://files.pharo.org/get-files/40/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/40/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV40.sources: http://files.pharo.org/get-files/40/sources.zip Creating starter scripts pharo and pharo-ui On a 64-bit system? You must install the 32-bit libraries Try `sudo aptitude install ia32-libs` or see http://pharo.org/gnu-linux-installation#64-bit-System-Setup for more info + ./pharo Pharo.image save Seaside --delete-old ./pharo: line 11: <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=release…>: No such file or directory Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 2

Build failed in Jenkins: Seaside » 50,development,vm #846
by ci-pharo-contribution＠inria.fr 04 Nov '16

04 Nov '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=50,VERSION=develop…> ------------------------------------------ Started by upstream project "Seaside" build number 846 originally caused by: Started by timer Building remotely on pharo-contribution-ubuntu16-04 (32 64 ubuntu linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=50,VERSION=develop…> Deleting project workspace... Deleting old artifacts from #844 [vm] $ /bin/sh -xe /tmp/hudson5702681890823605912.sh + dirname Seaside/PHARO=50,VERSION=development,VM=vm + export JOB_NAME=Seaside + bash + wget --quiet -O - get.pharo.org/50+vm Downloading the latest 50 Image: http://files.pharo.org/get-files/50/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/50/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV50.sources: http://files.pharo.org/get-files/50/sources.zip Creating starter scripts pharo and pharo-ui On a 64-bit system? You must install the 32-bit libraries Try `sudo aptitude install ia32-libs` or see http://pharo.org/gnu-linux-installation#64-bit-System-Setup for more info + ./pharo Pharo.image save Seaside --delete-old ./pharo: line 11: <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=50,VERSION=develop…>: No such file or directory Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 2

Build failed in Jenkins: Seaside » 40,bleedingEdge,vm #846
by ci-pharo-contribution＠inria.fr 04 Nov '16

04 Nov '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=bleedin…> ------------------------------------------ Started by upstream project "Seaside" build number 846 originally caused by: Started by timer Building remotely on pharo-contribution-ubuntu16-04 (32 64 ubuntu linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=bleedin…> Deleting project workspace... Deleting old artifacts from #844 [vm] $ /bin/sh -xe /tmp/hudson6633386141500701787.sh + dirname Seaside/PHARO=40,VERSION=bleedingEdge,VM=vm + export JOB_NAME=Seaside + + bashwget --quiet -O - get.pharo.org/40+vm Downloading the latest 40 Image: http://files.pharo.org/get-files/40/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/40/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV40.sources: http://files.pharo.org/get-files/40/sources.zip Creating starter scripts pharo and pharo-ui On a 64-bit system? You must install the 32-bit libraries Try `sudo aptitude install ia32-libs` or see http://pharo.org/gnu-linux-installation#64-bit-System-Setup for more info + ./pharo Pharo.image save Seaside --delete-old ./pharo: line 11: <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=40,VERSION=bleedin…>: No such file or directory Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 2

Build failed in Jenkins: Seaside » 50,release3.2,vm #846
by ci-pharo-contribution＠inria.fr 04 Nov '16

04 Nov '16

See <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=50,VERSION=release…> ------------------------------------------ Started by upstream project "Seaside" build number 846 originally caused by: Started by timer Building remotely on pharo-contribution-ubuntu16-04 (32 64 ubuntu linux) in workspace <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=50,VERSION=release…> Deleting project workspace... Deleting old artifacts from #844 [vm] $ /bin/sh -xe /tmp/hudson5526586890101310479.sh + dirname Seaside/PHARO=50,VERSION=release3.2,VM=vm + export JOB_NAME=Seaside + wget --quiet -O - get.pharo.org/50+vm + bash Downloading the latest 50 Image: http://files.pharo.org/get-files/50/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/50/pharo-linux-stable.zip pharo-vm/pharo Downloading PharoV50.sources: http://files.pharo.org/get-files/50/sources.zip Creating starter scripts pharo and pharo-ui On a 64-bit system? You must install the 32-bit libraries Try `sudo aptitude install ia32-libs` or see http://pharo.org/gnu-linux-installation#64-bit-System-Setup for more info + ./pharo Pharo.image save Seaside --delete-old ./pharo: line 11: <https://ci.inria.fr/pharo-contribution/job/Seaside/PHARO=50,VERSION=release…>: No such file or directory Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results

1 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

seaside-dev October 2016