Lots of bug fixes etc in this Probably some awful misses by me ;-)
http://etoys.squeak.org/download/attic/Etoys-To-Go-4.1.1.alpha1.zip
Enjoy
Karl
On 23.05.2011, at 20:01, karl ramberg wrote:
Lots of bug fixes etc in this Probably some awful misses by me ;-)
http://etoys.squeak.org/download/attic/Etoys-To-Go-4.1.1.alpha1.zip
Yay! Thank you! On to nit-picking ...
That should be 4.1.2-alpha1, and it does not belong in the attic, which is where old versions are kept ;)
I have not written up how to build a release image yet, will do so as time allows. E.g., when saving the image, you need to be in the top-level "unnamed" project, not the home screen. You would start with a clean image ("about" would not show a repo version). The NEWS file needs to be updated, as well as the copyright NOTICE. The new home project needs to be loaded (we got a Chinese translation). The ReleaseBuilderSqueakland is supposed to do all that, but it might not be quite up-to-date (I did 4.1.1 by hand IIRC). The release builder also writes out the new POT files so translators can work on the translations.
And the zip should only contain the .app folder, nothing else. And the version number in the Info.plist file needs to be updated. Etc. I really need to write it up :)
- Bert -
Thanks Bert Lots of details here I'm not aware of and don't be afraid to nit-pic :-) Karl
On Mon, May 23, 2011 at 10:01 PM, Bert Freudenberg bert@freudenbergs.dewrote:
On 23.05.2011, at 20:01, karl ramberg wrote:
Lots of bug fixes etc in this Probably some awful misses by me ;-)
http://etoys.squeak.org/download/attic/Etoys-To-Go-4.1.1.alpha1.zip
Yay! Thank you! On to nit-picking ...
That should be 4.1.2-alpha1, and it does not belong in the attic, which is where old versions are kept ;)
I have not written up how to build a release image yet, will do so as time allows. E.g., when saving the image, you need to be in the top-level "unnamed" project, not the home screen. You would start with a clean image ("about" would not show a repo version). The NEWS file needs to be updated, as well as the copyright NOTICE. The new home project needs to be loaded (we got a Chinese translation). The ReleaseBuilderSqueakland is supposed to do all that, but it might not be quite up-to-date (I did 4.1.1 by hand IIRC). The release builder also writes out the new POT files so translators can work on the translations.
And the zip should only contain the .app folder, nothing else. And the version number in the Info.plist file needs to be updated. Etc. I really need to write it up :)
- Bert -
On Mon, May 23, 2011 at 10:01 PM, Bert Freudenberg bert@freudenbergs.dewrote:
On 23.05.2011, at 20:01, karl ramberg wrote:
Lots of bug fixes etc in this Probably some awful misses by me ;-)
http://etoys.squeak.org/download/attic/Etoys-To-Go-4.1.1.alpha1.zip
Yay! Thank you! On to nit-picking ...
That should be 4.1.2-alpha1, and it does not belong in the attic, which is where old versions are kept ;)
I have not written up how to build a release image yet, will do so as time allows. E.g.,
when saving the image, you need to be in the top-level "unnamed" project,
not the home screen.
Ok
You would start with a clean image ("about" would not show a repo version).
I started with a clean image, not sure how to remove repo info
The NEWS file needs to be updated, as well as the copyright NOTICE.
Ok
The new home project needs to be loaded (we got a Chinese translation).
Ok
The ReleaseBuilderSqueakland is supposed to do all that, but it might not be quite up-to-date (I did 4.1.1 by hand IIRC). The release builder also writes out the new POT files so translators can work on the translations.
I guess this will be explained in the write up :-)
And the zip should only contain the .app folder, nothing else. And the version number in the Info.plist file needs to be updated. Etc. I really need to write it up :)
Ok
Karl
- Bert -
On 24.05.2011, at 22:03, karl ramberg wrote:
On Mon, May 23, 2011 at 10:01 PM, Bert Freudenberg bert@freudenbergs.de wrote: On 23.05.2011, at 20:01, karl ramberg wrote:
Lots of bug fixes etc in this Probably some awful misses by me ;-)
http://etoys.squeak.org/download/attic/Etoys-To-Go-4.1.1.alpha1.zip
Yay! Thank you! On to nit-picking ...
That should be 4.1.2-alpha1, and it does not belong in the attic, which is where old versions are kept ;)
I have not written up how to build a release image yet, will do so as time allows. E.g., when saving the image, you need to be in the top-level "unnamed" project, not the home screen. Ok
You would start with a clean image ("about" would not show a repo version). I started with a clean image, not sure how to remove repo info
The repo info only gets added when you say "yes" after updating. This loads additional packages, not just your published updates.
The NEWS file needs to be updated, as well as the copyright NOTICE.
Ok
The new home project needs to be loaded (we got a Chinese translation). Ok The ReleaseBuilderSqueakland is supposed to do all that, but it might not be quite up-to-date (I did 4.1.1 by hand IIRC). The release builder also writes out the new POT files so translators can work on the translations.
I guess this will be explained in the write up :-)
Ah well. Yes. You also can just do GetTextExporter exportTemplates (or something like that) ;)
And the zip should only contain the .app folder, nothing else. And the version number in the Info.plist file needs to be updated. Etc. I really need to write it up :)
Ok
- Bert -
I have a issue with Monticello and Kedama. I updated project Particle dye in water, but noticed that this adds Kedama players in a category: 'Morphic-Imported'
Should I just ignore this ?
I'm not quite sure how to fix it...
Karl
On Tue, May 24, 2011 at 10:38 PM, Bert Freudenberg bert@freudenbergs.dewrote:
On 24.05.2011, at 22:03, karl ramberg wrote:
On Mon, May 23, 2011 at 10:01 PM, Bert Freudenberg bert@freudenbergs.dewrote:
On 23.05.2011, at 20:01, karl ramberg wrote:
Lots of bug fixes etc in this Probably some awful misses by me ;-)
http://etoys.squeak.org/download/attic/Etoys-To-Go-4.1.1.alpha1.zip
Yay! Thank you! On to nit-picking ...
That should be 4.1.2-alpha1, and it does not belong in the attic, which is where old versions are kept ;)
I have not written up how to build a release image yet, will do so as time allows. E.g.,
when saving the image, you need to be in the top-level "unnamed" project,
not the home screen.
Ok
You would start with a clean image ("about" would not show a repo version).
I started with a clean image, not sure how to remove repo info
The repo info only gets added when you say "yes" after updating. This loads additional packages, not just your published updates.
The NEWS file needs to be updated, as well as the copyright NOTICE.
Ok
The new home project needs to be loaded (we got a Chinese translation).
Ok
The ReleaseBuilderSqueakland is supposed to do all that, but it might not be quite up-to-date (I did 4.1.1 by hand IIRC). The release builder also writes out the new POT files so translators can work on the translations.
I guess this will be explained in the write up :-)
Ah well. Yes. You also can just do GetTextExporter exportTemplates (or something like that) ;)
And the zip should only contain the .app folder, nothing else. And the version number in the Info.plist file needs to be updated. Etc. I really need to write it up :)
Ok
- Bert -
Found it: ReleaseBuilder new cleanUpEtoys
Karl
On Fri, May 27, 2011 at 12:36 AM, karl ramberg karlramberg@gmail.comwrote:
I have a issue with Monticello and Kedama. I updated project Particle dye in water, but noticed that this adds Kedama players in a category: 'Morphic-Imported'
Should I just ignore this ?
I'm not quite sure how to fix it...
Karl
On Tue, May 24, 2011 at 10:38 PM, Bert Freudenberg bert@freudenbergs.dewrote:
On 24.05.2011, at 22:03, karl ramberg wrote:
On Mon, May 23, 2011 at 10:01 PM, Bert Freudenberg bert@freudenbergs.dewrote:
On 23.05.2011, at 20:01, karl ramberg wrote:
Lots of bug fixes etc in this Probably some awful misses by me ;-)
http://etoys.squeak.org/download/attic/Etoys-To-Go-4.1.1.alpha1.zip
Yay! Thank you! On to nit-picking ...
That should be 4.1.2-alpha1, and it does not belong in the attic, which is where old versions are kept ;)
I have not written up how to build a release image yet, will do so as time allows. E.g.,
when saving the image, you need to be in the top-level "unnamed" project,
not the home screen.
Ok
You would start with a clean image ("about" would not show a repo version).
I started with a clean image, not sure how to remove repo info
The repo info only gets added when you say "yes" after updating. This loads additional packages, not just your published updates.
The NEWS file needs to be updated, as well as the copyright NOTICE.
Ok
The new home project needs to be loaded (we got a Chinese translation).
Ok
The ReleaseBuilderSqueakland is supposed to do all that, but it might not be quite up-to-date (I did 4.1.1 by hand IIRC). The release builder also writes out the new POT files so translators can work on the translations.
I guess this will be explained in the write up :-)
Ah well. Yes. You also can just do GetTextExporter exportTemplates (or something like that) ;)
And the zip should only contain the .app folder, nothing else. And the version number in the Info.plist file needs to be updated. Etc. I really need to write it up :)
Ok
- Bert -
We might also want to change the category for Kedama players.
declareAndPossiblyRename: only checks for #Player as superclass name. Since Kedama uses a different Player class, this falls back to the 'Morphic-Imported' category. At least that's what I think is happening.
IMHO we should change those categories to not collide with the MC package names. Either put everything into "Object categoryForUniclasses", or have multiple categories as previously, but use a distinct name. E.g. 'UserObjects-Morphic', 'UserObjects-Etoys', 'UserObjects-Balloon3D'.
Opinions?
- Bert -
On 27.05.2011, at 00:38, karl ramberg wrote:
Found it: ReleaseBuilder new cleanUpEtoys
Karl
On Fri, May 27, 2011 at 12:36 AM, karl ramberg karlramberg@gmail.com wrote:
I have a issue with Monticello and Kedama. I updated project Particle dye in water, but noticed that this adds Kedama players in a category: 'Morphic-Imported'
Should I just ignore this ?
I'm not quite sure how to fix it...
Karl
A distinct package name would be nice I got confuced when Morphic package got changed
EtoysUserScripts would be quite descriptive
Karl
On Fri, May 27, 2011 at 12:02 PM, Bert Freudenberg bert@freudenbergs.dewrote:
We might also want to change the category for Kedama players.
declareAndPossiblyRename: only checks for #Player as superclass name. Since Kedama uses a different Player class, this falls back to the 'Morphic-Imported' category. At least that's what I think is happening.
IMHO we should change those categories to not collide with the MC package names. Either put everything into "Object categoryForUniclasses", or have multiple categories as previously, but use a distinct name. E.g. 'UserObjects-Morphic', 'UserObjects-Etoys', 'UserObjects-Balloon3D'.
Opinions?
- Bert -
On 27.05.2011, at 00:38, karl ramberg wrote:
Found it: ReleaseBuilder new cleanUpEtoys
Karl
On Fri, May 27, 2011 at 12:36 AM, karl ramberg karlramberg@gmail.com
wrote:
I have a issue with Monticello and Kedama. I updated project Particle dye in water, but noticed that this adds
Kedama players in a category: 'Morphic-Imported'
Should I just ignore this ?
I'm not quite sure how to fix it...
Karl
etoys-dev mailing list etoys-dev@squeakland.org http://lists.squeakland.org/mailman/listinfo/etoys-dev
Then maybe UserObjects-Etoys and UserObjects-Kedama? Or lump them together? There are already some Kedama players in the existing "UserObjects" category.
If it were up to me I probably would just put everything under "UserObjects" for simplicity.
"#cleanUpEtoys" of course removes all projects. To make a release image you should use, which includes the cleanup call:
ReleaseBuilderSqueakland new prepareReleaseImage
- Bert -
On 27.05.2011, at 12:40, karl ramberg wrote:
A distinct package name would be nice I got confuced when Morphic package got changed
EtoysUserScripts would be quite descriptive
Karl
On Fri, May 27, 2011 at 12:02 PM, Bert Freudenberg bert@freudenbergs.de wrote: We might also want to change the category for Kedama players.
declareAndPossiblyRename: only checks for #Player as superclass name. Since Kedama uses a different Player class, this falls back to the 'Morphic-Imported' category. At least that's what I think is happening.
IMHO we should change those categories to not collide with the MC package names. Either put everything into "Object categoryForUniclasses", or have multiple categories as previously, but use a distinct name. E.g. 'UserObjects-Morphic', 'UserObjects-Etoys', 'UserObjects-Balloon3D'.
Opinions?
- Bert -
On 27.05.2011, at 00:38, karl ramberg wrote:
Found it: ReleaseBuilder new cleanUpEtoys
Karl
On Fri, May 27, 2011 at 12:36 AM, karl ramberg karlramberg@gmail.com wrote:
I have a issue with Monticello and Kedama. I updated project Particle dye in water, but noticed that this adds Kedama players in a category: 'Morphic-Imported'
Should I just ignore this ?
I'm not quite sure how to fix it...
Karl
etoys-dev mailing list etoys-dev@squeakland.org http://lists.squeakland.org/mailman/listinfo/etoys-dev
On Tue, May 24, 2011 at 2:01 AM, karl ramberg karlramberg@gmail.com wrote:
Lots of bug fixes etc in this Probably some awful misses by me ;-) http://etoys.squeak.org/download/attic/Etoys-To-Go-4.1.1.alpha1.zip
Enjoy Karl _______________________________________________ etoys-dev mailing list etoys-dev@squeakland.org http://lists.squeakland.org/mailman/listinfo/etoys-dev
Thanks, Karl.
I download and have a try, it seems that Chinese font package added by this commit (http://lists.squeakland.org/pipermail/etoys-dev/2011-May/006142.html) is missing from this package.
And, could following issues be integrated in 4.1.2?
http://tracker.squeakland.org/browse/SQ-876 http://tracker.squeakland.org/browse/SQ-879 http://tracker.squeakland.org/browse/SQ-930
-- Xin Wang
I'll add these fixes. Slowly learning how to maneuver this ship :-)
Karl
On Tue, May 24, 2011 at 12:49 AM, Xin Wang dram.wang@gmail.com wrote:
On Tue, May 24, 2011 at 2:01 AM, karl ramberg karlramberg@gmail.com wrote:
Lots of bug fixes etc in this Probably some awful misses by me ;-) http://etoys.squeak.org/download/attic/Etoys-To-Go-4.1.1.alpha1.zip
Enjoy Karl _______________________________________________ etoys-dev mailing list etoys-dev@squeakland.org http://lists.squeakland.org/mailman/listinfo/etoys-dev
Thanks, Karl.
I download and have a try, it seems that Chinese font package added by this commit ( http://lists.squeakland.org/pipermail/etoys-dev/2011-May/006142.html) is missing from this package.
And, could following issues be integrated in 4.1.2?
http://tracker.squeakland.org/browse/SQ-876 http://tracker.squeakland.org/browse/SQ-879 http://tracker.squeakland.org/browse/SQ-930
-- Xin Wang
etoys-dev@lists.squeakfoundation.org