So I tested a simple mandelbrot set rendering algorithm using the ArbitraryPrecisionFloat package and it works just fine, but terribly slowly.
So I had the idea of using mpfr via FFI and find that I can’t even begin.
I’m getting the dreaded External module not found error and just can’t get rid of it.
I thought I was taking the easy route and simply copying the mpfr library into the Squeak all-in-one Resources directory but no matter what I try, that error pops up.
initPrecision: aDefaultPrecision “initialize default precision"
<cdecl: void 'mpfr_init' (long ) module:'libmpfr.6.dylib'> ^self externalCallFailed
This is roughly the “hello world” of using mpfr, I thought, but can’t even do that.
Now, waiting in the wings is a bigger problem, I think: the mpfr library uses the gmp library. So how does one do THAT with squeak? Compile both libraries into a single target? (yikes!).
That might be an issue later on, but the impression I’m getting is that squeak simply can’t find libmpfr.6.dylib, so errors that result from calling a second library from the first haven’t even popped up yet.
Squeak5.3-19435-64bit, Mac OS X 10.15.6
Thanks
Lawson
Hi Lawson.
I think: the mpfr library uses the gmp library. So how does one do THAT with squeak?
You don't. Your operating system does that for you. Well, the same lookup rules for that dependent library apply, I suppose. Do you have the gmp library installed in your system?
Yes, not having all dependent libraries does raise that "external module not found" error, too. It can be confusing.
Working with FFI requires knowledge about working with shared libraries in your operating system. It's one of those "leaky abstractions" where Squeak is -- understandably -- not able to hold your hand for all kinds of configurations out there. :-)
You can try using a debug-build VM, which produces a more descriptive error log.
Best, Marcel Am 13.08.2020 12:11:53 schrieb LawsonEnglish lenglish5@cox.net: So I tested a simple mandelbrot set rendering algorithm using the ArbitraryPrecisionFloat package and it works just fine, but terribly slowly.
So I had the idea of using mpfr via FFI and find that I can’t even begin.
I’m getting the dreaded External module not found error and just can’t get rid of it.
I thought I was taking the easy route and simply copying the mpfr library into the Squeak all-in-one Resources directory but no matter what I try, that error pops up.
initPrecision: aDefaultPrecision “initialize default precision"
^self externalCallFailed
This is roughly the “hello world” of using mpfr, I thought, but can’t even do that.
Now, waiting in the wings is a bigger problem, I think: the mpfr library uses the gmp library. So how does one do THAT with squeak? Compile both libraries into a single target? (yikes!).
That might be an issue later on, but the impression I’m getting is that squeak simply can’t find libmpfr.6.dylib, so errors that result from calling a second library from the first haven’t even popped up yet.
Squeak5.3-19435-64bit, Mac OS X 10.15.6
Thanks
Lawson
Hi
On 13.08.2020, at 13:21, Marcel Taeumel marcel.taeumel@hpi.de wrote:
Hi Lawson.
I think: the mpfr library uses the gmp library. So how does one do THAT with squeak?
You don't. Your operating system does that for you. Well, the same lookup rules for that dependent library apply, I suppose. Do you have the gmp library installed in your system?
Yes, not having all dependent libraries does raise that "external module not found" error, too. It can be confusing.
Working with FFI requires knowledge about working with shared libraries in your operating system. It's one of those "leaky abstractions" where Squeak is -- understandably -- not able to hold your hand for all kinds of configurations out there. :-)
You can try using a debug-build VM, which produces a more descriptive error log.
also, try 'otool -L ' on the library you are trying to load.
Best, Marcel
Am 13.08.2020 12:11:53 schrieb LawsonEnglish lenglish5@cox.net:
So I tested a simple mandelbrot set rendering algorithm using the ArbitraryPrecisionFloat package and it works just fine, but terribly slowly.
So I had the idea of using mpfr via FFI and find that I can’t even begin.
How did you install mpfr?
I’m getting the dreaded External module not found error and just can’t get rid of it.
I thought I was taking the easy route and simply copying the mpfr library into the Squeak all-in-one Resources directory but no matter what I try, that error pops up.
initPrecision: aDefaultPrecision “initialize default precision"
^self externalCallFailed
This is roughly the “hello world” of using mpfr, I thought, but can’t even do that.
Now, waiting in the wings is a bigger problem, I think: the mpfr library uses the gmp library. So how does one do THAT with squeak? Compile both libraries into a single target? (yikes!).
That might be an issue later on, but the impression I’m getting is that squeak simply can’t find libmpfr.6.dylib, so errors that result from calling a second library from the first haven’t even popped up yet.
Squeak5.3-19435-64bit, Mac OS X 10.15.6
Note that MacOS changes rapidly these days and we might simply have not catched up with the newest nonsense of Apple . . .
Best regards -Tobias
Thanks
Lawson
Yes, thanks. I’ve created a very simple test app using mpfr. However, in xcode, at least, I have to explicitly link in both libgmp.dylib and libmpfr.dylib , which are both aliases pointing to the actual libriaries containing the code.
ALL the libraries of all types created by the MacPort and put into the macport directory have been copied into the resources via duplication rather than simply moving aliases around.
I first referred to “libmpfr.dylib” — which is an aliias — but starting using libmpfr.6.dylib (what the alias points to) on the outside chance that it was the alias causing problems.
I don’t see how the references to code in the gmp dylib found in the mpfr dylib are going to automatically resolve if xcode requires one to explicitly link both dylibs in order for something to compile and run.
.
My next test is to compile some absolutely trivial library without external references and see if I can get that to work.
Thanks for your input.
L
On Aug 13, 2020, at 4:21 AM, Marcel Taeumel marcel.taeumel@hpi.de wrote:
Hi Lawson.
I think: the mpfr library uses the gmp library. So how does one do THAT with squeak?
You don't. Your operating system does that for you. Well, the same lookup rules for that dependent library apply, I suppose. Do you have the gmp library installed in your system?
Yes, not having all dependent libraries does raise that "external module not found" error, too. It can be confusing.
Working with FFI requires knowledge about working with shared libraries in your operating system. It's one of those "leaky abstractions" where Squeak is -- understandably -- not able to hold your hand for all kinds of configurations out there. :-)
You can try using a debug-build VM, which produces a more descriptive error log.
Best, Marcel
Am 13.08.2020 12:11:53 schrieb LawsonEnglish lenglish5@cox.net:
So I tested a simple mandelbrot set rendering algorithm using the ArbitraryPrecisionFloat package and it works just fine, but terribly slowly.
So I had the idea of using mpfr via FFI and find that I can’t even begin.
I’m getting the dreaded External module not found error and just can’t get rid of it.
I thought I was taking the easy route and simply copying the mpfr library into the Squeak all-in-one Resources directory but no matter what I try, that error pops up.
initPrecision: aDefaultPrecision “initialize default precision"
^self externalCallFailed
This is roughly the “hello world” of using mpfr, I thought, but can’t even do that.
Now, waiting in the wings is a bigger problem, I think: the mpfr library uses the gmp library. So how does one do THAT with squeak? Compile both libraries into a single target? (yikes!).
That might be an issue later on, but the impression I’m getting is that squeak simply can’t find libmpfr.6.dylib, so errors that result from calling a second library from the first haven’t even popped up yet.
Squeak5.3-19435-64bit, Mac OS X 10.15.6
Thanks
Lawson
You are correct and i figured out my problem. The mpfr dylib has hard-coded references to the libgmp.dylib that was in the original directory that macports compiled the mpfr.dylib into. I’ll need to do craig latta’s solution of allowing that library to work, OR redirect macports to compile into the Resources directory.
This is going to make using Macports installed stuff rather difficult to use,m at least on Mac OS.
Unless it is possible to tweak the dylib to redirect to the Resourses directory…
And the answer is: not easily: http://lessons.livecode.com/m/4071/l/15029-linking-an-osx-external-bundle-wi... http://lessons.livecode.com/m/4071/l/15029-linking-an-osx-external-bundle-with-a-dylib-library
I’d have to figure out to manually compile the code and specify the build options at levels that aren’t exaclty relevent to my vision of a hello world implementation.
(so much for sticking my toe in the water while recovering from a 5 year, near-fatal illness).
Thanks for your advice, and you were spot on in what you thought was going on. Macports hardcodes the mpfr dylib to only work in that directory, and only look for the external gmp dylib in the same directory.
libmpfr.6.dylib: /opt/local/lib/libmpfr.6.dylib (compatibility version 7.0.0, current version 7.2.0) /opt/local/lib/libgmp.10.dylib (compatibility version 15.0.0, current version 15.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 1281.100.1)
L
On Aug 13, 2020, at 4:21 AM, Marcel Taeumel marcel.taeumel@hpi.de wrote:
Hi Lawson.
I think: the mpfr library uses the gmp library. So how does one do THAT with squeak?
You don't. Your operating system does that for you. Well, the same lookup rules for that dependent library apply, I suppose. Do you have the gmp library installed in your system?
Yes, not having all dependent libraries does raise that "external module not found" error, too. It can be confusing.
Working with FFI requires knowledge about working with shared libraries in your operating system. It's one of those "leaky abstractions" where Squeak is -- understandably -- not able to hold your hand for all kinds of configurations out there. :-)
You can try using a debug-build VM, which produces a more descriptive error log.
Best, Marcel
Am 13.08.2020 12:11:53 schrieb LawsonEnglish lenglish5@cox.net:
So I tested a simple mandelbrot set rendering algorithm using the ArbitraryPrecisionFloat package and it works just fine, but terribly slowly.
So I had the idea of using mpfr via FFI and find that I can’t even begin.
I’m getting the dreaded External module not found error and just can’t get rid of it.
I thought I was taking the easy route and simply copying the mpfr library into the Squeak all-in-one Resources directory but no matter what I try, that error pops up.
initPrecision: aDefaultPrecision “initialize default precision"
^self externalCallFailed
This is roughly the “hello world” of using mpfr, I thought, but can’t even do that.
Now, waiting in the wings is a bigger problem, I think: the mpfr library uses the gmp library. So how does one do THAT with squeak? Compile both libraries into a single target? (yikes!).
That might be an issue later on, but the impression I’m getting is that squeak simply can’t find libmpfr.6.dylib, so errors that result from calling a second library from the first haven’t even popped up yet.
Squeak5.3-19435-64bit, Mac OS X 10.15.6
Thanks
Lawson
On 14.08.2020, at 00:10, LawsonEnglish LEnglish5@cox.net wrote:
You are correct and i figured out my problem. The mpfr dylib has hard-coded references to the libgmp.dylib that was in the original directory that macports compiled the mpfr.dylib into. I’ll need to do craig latta’s solution of allowing that library to work, OR redirect macports to compile into the Resources directory.
This is going to make using Macports installed stuff rather difficult to use,m at least on Mac OS.
Unless it is possible to tweak the dylib to redirect to the Resourses directory…
Yes, its called install_name_tool(1) change dynamic shared library install names
And the answer is: not easily: http://lessons.livecode.com/m/4071/l/15029-linking-an-osx-external-bundle-wi...
I’d have to figure out to manually compile the code and specify the build options at levels that aren’t exaclty relevent to my vision of a hello world implementation.
(so much for sticking my toe in the water while recovering from a 5 year, near-fatal illness).
(Sorry, If you mean that literally, all the best for your recovery)
Thanks for your advice, and you were spot on in what you thought was going on. Macports hardcodes the mpfr dylib to only work in that directory, and only look for the external gmp dylib in the same directory.
libmpfr.6.dylib: /opt/local/lib/libmpfr.6.dylib (compatibility version 7.0.0, current version 7.2.0) /opt/local/lib/libgmp.10.dylib (compatibility version 15.0.0, current version 15.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 1281.100.1)
That's how most dylibs work :/ -t
L
On Aug 13, 2020, at 4:21 AM, Marcel Taeumel marcel.taeumel@hpi.de wrote:
Hi Lawson.
I think: the mpfr library uses the gmp library. So how does one do THAT with squeak?
You don't. Your operating system does that for you. Well, the same lookup rules for that dependent library apply, I suppose. Do you have the gmp library installed in your system?
Yes, not having all dependent libraries does raise that "external module not found" error, too. It can be confusing.
Working with FFI requires knowledge about working with shared libraries in your operating system. It's one of those "leaky abstractions" where Squeak is -- understandably -- not able to hold your hand for all kinds of configurations out there. :-)
You can try using a debug-build VM, which produces a more descriptive error log.
Best, Marcel
Am 13.08.2020 12:11:53 schrieb LawsonEnglish lenglish5@cox.net:
So I tested a simple mandelbrot set rendering algorithm using the ArbitraryPrecisionFloat package and it works just fine, but terribly slowly.
So I had the idea of using mpfr via FFI and find that I can’t even begin.
I’m getting the dreaded External module not found error and just can’t get rid of it.
I thought I was taking the easy route and simply copying the mpfr library into the Squeak all-in-one Resources directory but no matter what I try, that error pops up.
initPrecision: aDefaultPrecision “initialize default precision"
^self externalCallFailed
This is roughly the “hello world” of using mpfr, I thought, but can’t even do that.
Now, waiting in the wings is a bigger problem, I think: the mpfr library uses the gmp library. So how does one do THAT with squeak? Compile both libraries into a single target? (yikes!).
That might be an issue later on, but the impression I’m getting is that squeak simply can’t find libmpfr.6.dylib, so errors that result from calling a second library from the first haven’t even popped up yet.
Squeak5.3-19435-64bit, Mac OS X 10.15.6
Thanks
Lawson
Hi
On 13.08.2020, at 23:15, LawsonEnglish LEnglish5@cox.net wrote:
Yes, thanks. I’ve created a very simple test app using mpfr. However, in xcode, at least, I have to explicitly link in both libgmp.dylib and libmpfr.dylib , which are both aliases pointing to the actual libriaries containing the code.
ALL the libraries of all types created by the MacPort and put into the macport directory have been copied into the resources via duplication rather than simply moving aliases around.
I first referred to “libmpfr.dylib” — which is an aliias — but starting using libmpfr.6.dylib (what the alias points to) on the outside chance that it was the alias causing problems.
I don’t see how the references to code in the gmp dylib found in the mpfr dylib are going to automatically resolve if xcode requires one to explicitly link both dylibs in order for something to compile and run.
Linking is different from runtime-loading. If you show me the test-app code, I certainly can give you the way FFI would do things and show why things are as they are :)
.
My next test is to compile some absolutely trivial library without external references and see if I can get that to work.
That's a good start in any case :)
Best regards -Tobias
Thanks for your input.
L
On Aug 13, 2020, at 4:21 AM, Marcel Taeumel marcel.taeumel@hpi.de wrote:
Hi Lawson.
I think: the mpfr library uses the gmp library. So how does one do THAT with squeak?
You don't. Your operating system does that for you. Well, the same lookup rules for that dependent library apply, I suppose. Do you have the gmp library installed in your system?
Yes, not having all dependent libraries does raise that "external module not found" error, too. It can be confusing.
Working with FFI requires knowledge about working with shared libraries in your operating system. It's one of those "leaky abstractions" where Squeak is -- understandably -- not able to hold your hand for all kinds of configurations out there. :-)
You can try using a debug-build VM, which produces a more descriptive error log.
Best, Marcel
Am 13.08.2020 12:11:53 schrieb LawsonEnglish lenglish5@cox.net:
So I tested a simple mandelbrot set rendering algorithm using the ArbitraryPrecisionFloat package and it works just fine, but terribly slowly.
So I had the idea of using mpfr via FFI and find that I can’t even begin.
I’m getting the dreaded External module not found error and just can’t get rid of it.
I thought I was taking the easy route and simply copying the mpfr library into the Squeak all-in-one Resources directory but no matter what I try, that error pops up.
initPrecision: aDefaultPrecision “initialize default precision"
^self externalCallFailed
This is roughly the “hello world” of using mpfr, I thought, but can’t even do that.
Now, waiting in the wings is a bigger problem, I think: the mpfr library uses the gmp library. So how does one do THAT with squeak? Compile both libraries into a single target? (yikes!).
That might be an issue later on, but the impression I’m getting is that squeak simply can’t find libmpfr.6.dylib, so errors that result from calling a second library from the first haven’t even popped up yet.
Squeak5.3-19435-64bit, Mac OS X 10.15.6
Thanks
Lawson
beginners@lists.squeakfoundation.org
-
LawsonEnglish -
Marcel Taeumel -
Tobias Pape