Hi,
I'm new to smalltalk/squeak. Trying to learn seaside. I want to use the web development image but i can't seem to get it to work. I have mac os x leopard on macbook pro. I have tried the following each with failure:
* I installed squeak via darwin ports but it just hangs if i try to load the web image using the following squeak -vm-display-Quartz sq3webdev.image
*I downloaded and installed the MacOSX universal app from squeak homepage. It will load the web dev image but has visual errors i'm guessing from wrong version incompatibilities?? there are text artifacts and errors throughout
So my question is how does everyone else install on mac os x. I'm a beginner at squeak but not computer science/unix/etc. I'm looking to install it the proper way and in a way where i can choose which image gets loaded at the start, because I started learning seaside with the oneclick installer but i messed up that image to the point where it crashes 5 seconds after loading. Unfortunately this is halfway through the todoapp tutorial, so i have to start it over when i do get it working.
thanks, Aaron
On Wed, May 21, 2008 at 10:40 PM, Aaron Broad aaron.broad@gmail.com wrote:
Hi,
I'm new to smalltalk/squeak. Trying to learn seaside. I want to use the web development image but i can't seem to get it to work. I have mac os x leopard on macbook pro. I have tried the following each with failure:
- I installed squeak via darwin ports but it just hangs if i try to load the
web image using the following squeak -vm-display-Quartz sq3webdev.image
*I downloaded and installed the MacOSX universal app from squeak homepage. It will load the web dev image but has visual errors i'm guessing from wrong version incompatibilities?? there are text artifacts and errors throughout
So my question is how does everyone else install on mac os x.
Hi Aaron,
I have the same computer / OS combination. I am using the squeak-dev based image, but based on version 3.9.1 without problems. I have just downloaded and started sq3.10-7159web08.05.2 and I see a small visual problem (a progress bar looks a bit strange).
Is that what you mean? Can you tell me how I can reproduce more of these visual errors?
In the mean time it might be hepful to use one of the 3.9.1 based images, however you won't get look enhancements out of the box.
Also, about the todo app that you were working on: you can probably recover it from the changes file, see "How can I recover my work if a crash has occurred?" in http://wiki.squeak.org/squeak/2168
Cheers
Matthias
... just one mor ething about recovering the Todo app: you'll want to open the .changes file that was originally produced in the Seaside One Click experience image. That will be inside the App folder (Control click on the One Click Application, and select "Show folder contents"). You then copy it somewhere, e.g. onto your desktop. Then open it from another, stable image, like this:
ChangeList browseFile: 'ChangesOfChangeSetOrStFileName'
Then proceed as indicated in the swiki page. Alternatively you can open the changes file in a file list (get that form the Squeak world menu) and browse it.
Cheers
Matthias
On Thu, May 22, 2008 at 1:16 PM, Matthias Berth matthias.berth@googlemail.com wrote:
On Wed, May 21, 2008 at 10:40 PM, Aaron Broad aaron.broad@gmail.com wrote:
Hi,
I'm new to smalltalk/squeak. Trying to learn seaside. I want to use the web development image but i can't seem to get it to work. I have mac os x leopard on macbook pro. I have tried the following each with failure:
- I installed squeak via darwin ports but it just hangs if i try to load the
web image using the following squeak -vm-display-Quartz sq3webdev.image
*I downloaded and installed the MacOSX universal app from squeak homepage. It will load the web dev image but has visual errors i'm guessing from wrong version incompatibilities?? there are text artifacts and errors throughout
So my question is how does everyone else install on mac os x.
Hi Aaron,
I have the same computer / OS combination. I am using the squeak-dev based image, but based on version 3.9.1 without problems. I have just downloaded and started sq3.10-7159web08.05.2 and I see a small visual problem (a progress bar looks a bit strange).
Is that what you mean? Can you tell me how I can reproduce more of these visual errors?
In the mean time it might be hepful to use one of the 3.9.1 based images, however you won't get look enhancements out of the box.
Also, about the todo app that you were working on: you can probably recover it from the changes file, see "How can I recover my work if a crash has occurred?" in http://wiki.squeak.org/squeak/2168
Cheers
Matthias
Thanks. I have those two images. What do you use for an executable though?
thanks, Aaron
On 22-May-08, at 8:24 AM, Matthias Berth wrote:
... just one mor ething about recovering the Todo app: you'll want to open the .changes file that was originally produced in the Seaside One Click experience image. That will be inside the App folder (Control click on the One Click Application, and select "Show folder contents"). You then copy it somewhere, e.g. onto your desktop. Then open it from another, stable image, like this:
ChangeList browseFile: 'ChangesOfChangeSetOrStFileName'
Then proceed as indicated in the swiki page. Alternatively you can open the changes file in a file list (get that form the Squeak world menu) and browse it.
Cheers
Matthias
On Thu, May 22, 2008 at 1:16 PM, Matthias Berth matthias.berth@googlemail.com wrote:
On Wed, May 21, 2008 at 10:40 PM, Aaron Broad aaron.broad@gmail.com wrote:
Hi,
I'm new to smalltalk/squeak. Trying to learn seaside. I want to use the web development image but i can't seem to get it to work. I have mac os x leopard on macbook pro. I have tried the following each with failure:
- I installed squeak via darwin ports but it just hangs if i try
to load the web image using the following squeak -vm-display-Quartz sq3webdev.image
*I downloaded and installed the MacOSX universal app from squeak homepage. It will load the web dev image but has visual errors i'm guessing from wrong version incompatibilities?? there are text artifacts and errors throughout
So my question is how does everyone else install on mac os x.
Hi Aaron,
I have the same computer / OS combination. I am using the squeak-dev based image, but based on version 3.9.1 without problems. I have just downloaded and started sq3.10-7159web08.05.2 and I see a small visual problem (a progress bar looks a bit strange).
Is that what you mean? Can you tell me how I can reproduce more of these visual errors?
In the mean time it might be hepful to use one of the 3.9.1 based images, however you won't get look enhancements out of the box.
Also, about the todo app that you were working on: you can probably recover it from the changes file, see "How can I recover my work if a crash has occurred?" in http://wiki.squeak.org/squeak/2168
Cheers
Matthias
Beginners mailing list Beginners@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/beginners
The executable is called Squeak 3.8.18beta1U.app. I think I downloaded it via squeak.org.
Matthias
On Thu, May 22, 2008 at 3:08 PM, Aaron Broad aaron.broad@gmail.com wrote:
Thanks. I have those two images. What do you use for an executable though?
thanks, Aaron
On 22-May-08, at 8:24 AM, Matthias Berth wrote:
... just one mor ething about recovering the Todo app: you'll want to open the .changes file that was originally produced in the Seaside One Click experience image. That will be inside the App folder (Control click on the One Click Application, and select "Show folder contents"). You then copy it somewhere, e.g. onto your desktop. Then open it from another, stable image, like this:
ChangeList browseFile: 'ChangesOfChangeSetOrStFileName'
Then proceed as indicated in the swiki page. Alternatively you can open the changes file in a file list (get that form the Squeak world menu) and browse it.
Cheers
Matthias
On Thu, May 22, 2008 at 1:16 PM, Matthias Berth matthias.berth@googlemail.com wrote:
On Wed, May 21, 2008 at 10:40 PM, Aaron Broad aaron.broad@gmail.com wrote:
Hi,
I'm new to smalltalk/squeak. Trying to learn seaside. I want to use the web development image but i can't seem to get it to work. I have mac os x leopard on macbook pro. I have tried the following each with failure:
- I installed squeak via darwin ports but it just hangs if i try to load
the web image using the following squeak -vm-display-Quartz sq3webdev.image
*I downloaded and installed the MacOSX universal app from squeak homepage. It will load the web dev image but has visual errors i'm guessing from wrong version incompatibilities?? there are text artifacts and errors throughout
So my question is how does everyone else install on mac os x.
Hi Aaron,
I have the same computer / OS combination. I am using the squeak-dev based image, but based on version 3.9.1 without problems. I have just downloaded and started sq3.10-7159web08.05.2 and I see a small visual problem (a progress bar looks a bit strange).
Is that what you mean? Can you tell me how I can reproduce more of these visual errors?
In the mean time it might be hepful to use one of the 3.9.1 based images, however you won't get look enhancements out of the box.
Also, about the todo app that you were working on: you can probably recover it from the changes file, see "How can I recover my work if a crash has occurred?" in http://wiki.squeak.org/squeak/2168
Cheers
Matthias
Beginners mailing list Beginners@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/beginners
Beginners mailing list Beginners@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/beginners
thanks. Thought i couldn't run 3.8 with 3.10 image. Works great now I think.
Thanks, Aaron
On 22-May-08, at 11:54 AM, Matthias Berth wrote:
The executable is called Squeak 3.8.18beta1U.app. I think I downloaded it via squeak.org.
Matthias
On Thu, May 22, 2008 at 3:08 PM, Aaron Broad aaron.broad@gmail.com wrote:
Thanks. I have those two images. What do you use for an executable though?
thanks, Aaron
On 22-May-08, at 8:24 AM, Matthias Berth wrote:
... just one mor ething about recovering the Todo app: you'll want to open the .changes file that was originally produced in the Seaside One Click experience image. That will be inside the App folder (Control click on the One Click Application, and select "Show folder contents"). You then copy it somewhere, e.g. onto your desktop. Then open it from another, stable image, like this:
ChangeList browseFile: 'ChangesOfChangeSetOrStFileName'
Then proceed as indicated in the swiki page. Alternatively you can open the changes file in a file list (get that form the Squeak world menu) and browse it.
Cheers
Matthias
On Thu, May 22, 2008 at 1:16 PM, Matthias Berth matthias.berth@googlemail.com wrote:
On Wed, May 21, 2008 at 10:40 PM, Aaron Broad <aaron.broad@gmail.com
wrote:
Hi,
I'm new to smalltalk/squeak. Trying to learn seaside. I want to use the web development image but i can't seem to get it to work. I have mac os x leopard on macbook pro. I have tried the following each with failure:
- I installed squeak via darwin ports but it just hangs if i try
to load the web image using the following squeak -vm-display-Quartz sq3webdev.image
*I downloaded and installed the MacOSX universal app from squeak homepage. It will load the web dev image but has visual errors i'm guessing from wrong version incompatibilities?? there are text artifacts and errors throughout
So my question is how does everyone else install on mac os x.
Hi Aaron,
I have the same computer / OS combination. I am using the squeak- dev based image, but based on version 3.9.1 without problems. I have just downloaded and started sq3.10-7159web08.05.2 and I see a small visual problem (a progress bar looks a bit strange).
Is that what you mean? Can you tell me how I can reproduce more of these visual errors?
In the mean time it might be hepful to use one of the 3.9.1 based images, however you won't get look enhancements out of the box.
Also, about the todo app that you were working on: you can probably recover it from the changes file, see "How can I recover my work if a crash has occurred?" in http://wiki.squeak.org/squeak/2168
Cheers
Matthias
Beginners mailing list Beginners@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/beginners
Beginners mailing list Beginners@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/beginners
Beginners mailing list Beginners@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/beginners
Hi aaron
you can take the seaside distribution If you click on it and ask show contents... you will see the image and the source and the package folder. Else you can take 3.9 full.
stef
On May 21, 2008, at 10:40 PM, Aaron Broad wrote:
Hi,
I'm new to smalltalk/squeak. Trying to learn seaside. I want to use the web development image but i can't seem to get it to work. I have mac os x leopard on macbook pro. I have tried the following each with failure:
- I installed squeak via darwin ports but it just hangs if i try to
load the web image using the following squeak -vm-display-Quartz sq3webdev.image
*I downloaded and installed the MacOSX universal app from squeak homepage. It will load the web dev image but has visual errors i'm guessing from wrong version incompatibilities?? there are text artifacts and errors throughout
So my question is how does everyone else install on mac os x. I'm a beginner at squeak but not computer science/unix/etc. I'm looking to install it the proper way and in a way where i can choose which image gets loaded at the start, because I started learning seaside with the oneclick installer but i messed up that image to the point where it crashes 5 seconds after loading. Unfortunately this is halfway through the todoapp tutorial, so i have to start it over when i do get it working.
thanks, Aaron _______________________________________________ Beginners mailing list Beginners@lists.squeakfoundation.org http://lists.squeakfoundation.org/mailman/listinfo/beginners
beginners@lists.squeakfoundation.org
-
Aaron Broad -
Matthias Berth -
stephane ducasse