seaside August 2008

seaside@lists.squeakfoundation.org

68 participants
67 discussions

Building OpenSSL on Windows?
by Bill Schwab 03 Aug '08

03 Aug '08

Boris, Thanks for your quick response. At the risk of appearing to be ungrateful, it leaves the real question unanswered. Specifically, I am curious about ways to build the current OpenSSL on Windows using open tools. It is not critical, but it would be nice. The sourceforge link is for 0.9.7c, while OpenSSL is now at 0.9.8h. The Shining Light binaries are current, but (so far) appear to have problems, at least on the relevant system. In particular, I am having problems with openssl.exe and friends; generating a signing request is bombing out. I installed the recommended runtime support. It is easy to assume that the problems are ultimately due to "innovation" from Microsoft (SL did recently switch to vc2008), but it could also be the win2k3 box on which I am trying to run the code. Maybe I did not reboot it enough times ;) Understanding that I will probably begin using Linux systems for my internal CA needs (and for everything else as soon as I can do so intelligently), and that Apache will hopefully serve as a source of binaries for win32, I would still like to be able to build OpenSSL from source on win32. Ideally, I would like to use Mingw, and would try cygwin if that is required. I am not opposed to commercial software, but view using Microsoft tools as a step backward in the evolution of my software. Any pointers will be appreciated. Bill =============================== Boris Popov boris at deepcovelabs.com Mon Jul 28 19:37:48 UTC 2008 http://www.slproweb.com/products/Win32OpenSSL.html http://gnuwin32.sourceforge.net/packages/openssl.htm -Boris -- +1.604.689.0322 DeepCove Labs Ltd. 4th floor 595 Howe Street Vancouver, Canada V6C 2T5 http://tinyurl.com/r7uw4 boris at deepcovelabs.com CONFIDENTIALITY NOTICE This email is intended only for the persons named in the message header. Unless otherwise indicated, it contains information that is private and confidential. If you have received it in error, please notify the sender and delete the entire message including any attachments. Thank you. > -----Original Message----- > From: seaside-bounces at lists.squeakfoundation.org [mailto:seaside- > bounces at lists.squeakfoundation.org] On Behalf Of Bill Schwab > Sent: Monday, July 28, 2008 12:31 PM > To: seaside at lists.squeakfoundation.org > Subject: [Seaside] Building OpenSSL on Windows? > > Hello all, > > I am hopefully getting close to fielding my BibTeX system, but decided > to make a new certificate for the machine, and ran into troubles with > things that I had considered stable for some time. > > Do any of you have experience building OpenSSL via mingw? Does it work > with the most recent versions? My bag of tricks appears to be failing > me, and most of what I see on the net talks about upgraded MS tools - I > am trying hard to remove their influence from my life, so I am not keen > on running home to Redmond. Should I just switch to cygwin?? I would > want to build binaries that are independent of the environment, which > AFAIK is possible. > > If it gets to be too much trouble, I can probably switch to skimming > off of Apache for the binaries. I first fought through the build > process because Apache did not ship with mod_ssl and friends :) That > would leave me wanting CA functionality (creating self-signed > certificates), and I suppose I could begin to get that from Linux. > Suggestions, warnings, saged advice, etc.?? > > Bill Wilhelm K. Schwab, Ph.D. University of Florida Department of Anesthesiology PO Box 100254 Gainesville, FL 32610-0254 Email: bschwab(a)anest.ufl.edu Tel: (352) 846-1285 FAX: (352) 392-7029

1 0

Re: [Seaside] Re: Yes, it works - and fast too! (was [Q] File Upload/Download Server, Comanche or Swazoo)
by "S.J.Chun" 03 Aug '08

03 Aug '08

Though not directly related to squeak case, for perl case, we've got best result on Gigabit network with 40-45MB buffer. ----- Original Message ----- From: Philippe Marschall <philippe.marschall(a)gmail.com> To: Seaside - general discussion <seaside(a)lists.squeakfoundation.org> Sent: 08-08-03 20:16:14 Subject: Re: [Seaside] Re: Yes, it works - and fast too! (was [Q] File Upload/Download Server, Comanche or Swazoo) 2008/8/3 Göran Krampe <goran(a)krampe.se>: > Hi again! > > Janko Mivšek wrote: >> Hi all, >> >> Göran's work encouraged me to run benchmarks more carefully and >> repeatably to minimize impact of OS file system performance and as you >> can see, Kom and Swazoo are actually close in upload performance, about >> 5-6MB/s. >> >> Big apology to Squeak community for that original 1.5MB/s figure, which >> obviously came out from only one test, instead of repeatable to avoid >> other impacts. In new tests I didn't change Swazoo code, I just made an >> additional upload demo on Aida. >> >> Here are results in seconds of repeatable test for two files, 572MB and >> 102MB ones: >> >> 572MB file (600.037.00 bytes) >> >> Squeak: >> Kom/Seaside 92 98 117 (avg 5.9MB/s) >> Swazoo/Aida 108 111 107 (avg 5.6MB/s) >> VW: >> Swazoo/Aida 67 68 66 (avg 9MB/s) >> >> >> 102MB file (106.491.000 bytes) >> >> Squeak: >> Kom/Seaside 18 35 25 32 (avg 3.9MB/s) >> Swazoo/Aida 16 16 17 16 (avg 6.6MB/s) >> VW: >> Swazoo/Aida 5 5 6 5 (avg 20MB/s) >> >> As you can see for larger files we are very close while for smaller file >> Swazoo is still faster. Also you can see that Kom results vary a lot >> while Swazoo ones are stable. It seems that this is due to bigger amount >> of garbage generation by Kom (this can also be seen from memory >> consumption variations) while Swazoo garbage is minimal. >> >> In any case we can conclude with quite certainty that on Squeak we >> reached the upload speed limit near 6MB/sec. To be faster we will need >> to optimize TCP socket and file VM modules. > > Hmmm, ok, I did two more things: Could you put these in a new version of Kom, let's say KomHttpServer-gk.32? > - Refactored away one buffer copy. Now the Kom code copies straight from > the SocketStream inBuffer into the FileStream. > - Raised the buffer size from 1 Mb to 10 (or 20, 30, it does improve > numbers with a large buffer). That sounds a bit extreme. We're talking about allocating a 10Mb buffer for each upload, right? Cheers Philippe

1 0

Re: [Seaside] Re: Yes, it works - and fast too! (was [Q] File Upload/Download Server, Comanche or Swazoo)
by "S.J.Chun" 03 Aug '08

03 Aug '08

1 0

A Bit OT: Monticello question
by Richard E. Flower 02 Aug '08

02 Aug '08

Hi all... I'm finding that I need to use the pre-built Seaside/Squeak image as part of updating my local copy of Magritte for VW.. So, I find the prebuilt Seaside image to be VERY slick compared to the vanilla squeak setup.. Anyway, I start up the Monticello browser and point over to Lukas repository -- no problem! I select 'Magritte-All' and it lists all versions (most recent lr. 269).. What I'm curious about is the 'diff' tool.. When I select 'lr.269' version of Magritte- all and press the diff button, it prompts for ancestors and I select my older version lr. 251.. What it brings up is a window telling the diffs and if I then press "browse" it brings up a 'Snapshot of Magritte-All-lr.269(251).mcd' window and in the left most pane is "*Extensions" and I see no modifications.. I've tried this with several versions and see nothing.. Is there a way to see the differences between two versions in Monticello? Ideally I'd like to know what methods changed, new classes, instance variables, etc.. Sorry if this is OT -- I do not have a subscription to the squeak ML at this point and hope nobody gets too annoyed... I didn't really see this addressed on the web docs for Monticello.. Thanks! -- Rick

2 2

CSS framework
by Dario Trussardi 01 Aug '08

01 Aug '08

Hi, i work with Squeak - Seaside - Magritte. My question are : How i can management the CSS rules? I can use a specific framework to do it ? Any pointers would be greatly appreciated! Thanks! Dario

3 2

Ajax and decomposition views
by VAM 01 Aug '08

01 Aug '08

My question is trivial, but I can't find same exactly theme. I have ListViewComponent for rendering any collection. User may select item and another component DetailsView must shows detail information about selected item. ListView don't know about DetailsView, because I can't write html listItem onClick: (html updater id: 'DetailsView'; callback: [:renderer | self renderDetailsOn: renderer]). How right make decomposition in my case? -- View this message in context: http://www.nabble.com/Ajax-and-decomposition-views-tp18730184p18730184.html Sent from the Squeak - Seaside mailing list archive at Nabble.com.

4 7

Squeak hanging on file upload
by pmarchwiak 01 Aug '08

01 Aug '08

I am having some issues with Seaside's file upload. Occasionally I will be able to upload with no problems, but the majority of the time Squeak hangs, using 100% of the CPU. I am using the Seaside One-Click Experience 2.8.2 image available from seaside.st on Ubuntu Linux 8.04. This is the file upload code I am using: upload: aWAFile fs := FileStream newFileNamed: aWAFile fileName. [fs binary; nextPutAll: aWAFile contents] ensure: [fs close]. Any ideas? Could this be a general file streaming issue? -- View this message in context: http://www.nabble.com/Squeak-hanging-on-file-upload-tp18725149p18725149.html Sent from the Squeak - Seaside mailing list archive at Nabble.com.

3 3

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

seaside August 2008