seaside September 2013

seaside@lists.squeakfoundation.org

29 participants
33 discussions

debugging javascript within browsers is hard when the browser show the response on a single line
by Nick Ager 05 Jul '14

05 Jul '14

Hi, I wonder if other people suffer from the same problem when debugging javascript: Seaside's response is viewed by browsers as a string without line-breaks. Normally this isn't a problem as the browser "pretty-prints" the output when inspecting the html. However when debugging javascript, either inline or within a file-library the script debugger (I'm currently using Mac Safari) shows the output as a single line - which makes it impossible to interpret any javascript generated errors ("syntax error: line 1"!!) or to set meaningful breakpoints. I've discovered that calling #withInternetLineEndings on the file-library string results in browsers interpreting the line-endings as expected. Locally when I'm debugging I've created a class derived from WAHtmlDocument, which overrides #nextPutAll: WAHtmlDocumentWithInternetLineEndings>>#nextPutAll: aString super nextPutAll: aString withInternetLineEndings and I modify WAFileLibrary>>#handle: modifying the WAResponse>>#document: to: document: ((self documentForFile: fileName) withInternetLineEndings) Is there a better solution? Are there easier workarounds, browser settings etc. I created an issue for this problem: http://code.google.com/p/seaside/issues/detail?id=675 Though if there are easy workaround that I've missed, I'd be delighted to close the issue. Thanks Nick

6 13

Configuring Zinc & Seaside to listen 127.0.0.1 only
by Olivier Auverlot 23 Dec '13

23 Dec '13

Hi, I must deploy an application made with Zinc and Seaside. My application is behind a proxy installed on the same computer, I want to configure Seaside to accept only the connection from the 127.0.0.1 address. How to do that ? Best regards Olivier ;-)

5 7

jQuery tutorial
by Jeff Gray 04 Oct '13

04 Oct '13

Is there a good resource for learning jQuery in seaside? I'm especially interested in how to use widgets other than those that are bundled with seaside. Eg a gantt chart widget. -- View this message in context: http://forum.world.st/jQuery-tutorial-tp4709448.html Sent from the Seaside General mailing list archive at Nabble.com.

5 10

jqGrid loadComplete select row question
by Sabine Knöfel 30 Sep '13

30 Sep '13

Hi, I use jQGrid and want that after loadComplete a certain row is selected, (the row is set in my model). If I test this with a), it works, but it is always the same object/row selected (7864354): a) html table script: (html jQuery this grid onSelectRow:... loadComplete: (JSStream on: 'jQuery("#gridID").setSelection(''7864354'');'); ... For selecting the object from my model, I have to pass the number of the object to select. But if I try this b), it does not work. ... loadComplete: (html jQuery ajax callback: [:script | JSStream on: ('jQuery("#gridID").setSelection(''{1}'');' format: { script}) ] value: (self reloadButtonJavaScriptObject)) ; If I inspect the result of ('jQuery("#gridID").setSelection(''{1}'');' format: { script}) this is fine, as in a), ==> ('jQuery("#gridID").setSelection(''7864354'');') But there must be something wrong with the kind I call it. Can anyone give me a hint? Regards Sabine -- View this message in context: http://forum.world.st/jqGrid-loadComplete-select-row-question-tp4710581.html Sent from the Seaside General mailing list archive at Nabble.com.

1 1

DNU msgs in Web browser
by Usman Bhatti 27 Sep '13

27 Sep '13

Hello, I am using Seaside on Pharo 2.0 and strangely I am getting the DNU error msgs in my web browser instead of my image where they would make more sense and debugging them will be much easier. Is there any option in Seaside to pop up the debugger in the image, as my current 1.3 image does? Usman

2 2

Loading Seaside adaptors in 3.1
by Johan Brichau 27 Sep '13

27 Sep '13

Hi Seasiders, If you want to load an adaptor with Seaside3.1, you need to load it explicitly using the ConfigurationOfSeaside3. There is no default adaptor for any platform and the entire Metacello configuration has been written with modular loading in mind. So please do not add adaptors to the core group! Metacello is very easy to use like this. For example: To load it with the Zinc adaptor: (ConfigurationOfSeaside3 project version:'3.1') load: #('Core' 'Zinc') To load it with the WebClient adaptor: (ConfigurationOfSeaside3 project version:'3.1') load: #('Core' 'WebClient') To load it with the Swazoo adaptor: (ConfigurationOfSeaside3 project version:'3.1') load: #('Core' 'Swazoo') To load it with the Kom adaptor: (ConfigurationOfSeaside3 project version:'3.1') load: #('Core' 'Kom') To load it with the Comanche adaptor: (ConfigurationOfSeaside3 project version:'3.1') load: #('Core' 'Comanche') To load it with the FastCGI adaptor: (ConfigurationOfSeaside3 project version:'3.1') load: #('Core' 'FastCGI') Cheers! Johan

1 0

rights to write in Seaside team?
by Esteban Lorenzano 26 Sep '13

26 Sep '13

Hi, I updated the ConfigurationOfSeasideRest to add a version 0.22-Seaside31 (self explanatory) can I have rights to upload it? cheers, Esteban

4 4

Maybe a FileReference bug?
by Jupiter Jones 25 Sep '13

25 Sep '13

Hi All, I've got Pier3, seaside 3.0.8(9?) running in Pharo 2 and have an issue with FileUpload. The issue appear to be in FileReference resolveString: resolveString: aString | thePath | thePath := filesystem pathFromString: aString. ^ filesystem referenceTo: (path resolve: thePath) aString is 'image.png', aFileReference path is the full path to the file: eg. /home/jupiter/image.png however (path resolve: thePath) returns: /home/jupiter/image.png/image.png I think I may have an issue with the packages loaded since I also needed to chance a bunch of deprecated #pathName to #fullName. I kinda expected this in the Pier classes since I don't think it's ready for 2 (just guessing). I also noticed that I have the FileSystem-Legacy package loaded and saw a comment about it being needed for seaside 3.0.x in Pharo2… which is what I'm running. Haven't looked deep enough to work it out yet, but wanted to ask if I'm running in circles with the wrong versions of things before I continue. Any advice? Thanks in advance. Cheers, Jupiter

2 1

Re: Seaside book on Github?
by Dmitri Zagidulin 23 Sep '13

23 Sep '13

What's the best way to contribute to the Dynamic Web Development with Seaside (http://book.seaside.st/book )? Is there a Github repo somewhere, like there is for https://github.com/SquareBracketAssociates/UpdatedPharoByExample ? Or if not, are there any plans to make a repo, by any chance? (Who are the current maintainers / who would be the people to talk to?) Thanks! Dmitri Zagidulin

1 0

Status of Flotr
by Usman Bhatti 22 Sep '13

22 Sep '13

Hello, I've been using Flotr charts (http://www.squeaksource.com/flotr) in Seaside for a personal project in web data mining. I tried to port my project to Pharo 2.0, gotten my image from the jenkins (tx for the jenkins, it was very helpful to obtain the image). Now, when loading the package into Pharo 2.0 image, I got DNU: FRChartExamples class(Object)>>doesNotUnderstand: #registerAsApplication: I still works in my pharo 1.3 image. My questions: - Is Squeaksource repo the default for Flotr or am I using an old repo: http://www.squeaksource.com/flotr?? - Is there any other chart library in Seaside that is more "active"? I found that the DNU problem can be solved by replacing #registerAsApplication: ===> WAAdmin register: self asApplicationAt: component-web-path... So I'll change it but I do not want to commit to SS because it is preparing to disappear, so I might create a fork at SThub. regards, Usman Bhatti

3 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

seaside September 2013