seaside July 2010

seaside@lists.squeakfoundation.org

54 participants
78 discussions

ReCaptcha on Seaside 3.0
by dtrussardi＠tiscali.it 23 Jul '10

23 Jul '10

Hi, i load the RemoteService-Recaptcha-noha.7 into Pharo image with Seaside30. The RSRecaptchaConfiguration class define the method: attributes ^{ (WAStringAttribute key: #publicKey group: #recaptcha). (WAStringAttribute key: #privateKey group: #recaptcha). (WAStringAttribute key: #remoteIp group: #recaptcha). } Because WAStringAttribute don't define the key: group: method i define it : key: keySymbol group: groupSymbol | rsl | rsl := self key: keySymbol. rsl group: groupSymbol. ^rsl After i register the captcha example application wtih : RSRecaptchaExampleComponent initialize | app | app := WAAdmin register: self asApplicationAt: 'captcha'. app configuration addParent: RSRecaptchaConfiguration instance . app preferenceAt: #privateKey put: '6LcsEwcAAAAAAH0kf0...................'. app preferenceAt: #publicKey put: '6LcsEwcAAAAAAImhBhKTw.................'. Now when do the web request of captcha the browser answer: MessageNotUnderstood: ByteSymbol>>between:and: Your request could not be completed. An exception occurred. Anyone work , do test, about captcha into Seaside 30 ? Any consideration are appreciated . Thanks, Dario

4 5

Re: [Seaside] WADispatcher trimForDeployment method
by Paul DeBruicker 22 Jul '10

22 Jul '10

Hi Dario: You could make your own on the class side of your root component like so: MyRootComponent class>>trimForDeployment WAAdmin applicationDefaults removeParent: WADevelopmentConfiguration instance. WADispatcher default handlers do: [:each | WADispatcher default unregister: each ]. self initialize. and then run it in a workspace with: MyRootCompontent trimForDeployment when you want to put up your image. One problem with doing this is that the image is larger than it needs to be because it can have the development tools and config application still loaded in it. But since you may not have to worry about running as many images on a server as possible that may be an OK trade-off. Paul On 07/22/2010 12:14 PM, seaside-request(a)lists.squeakfoundation.org wrote: > Message: 3 > Date: Thu, 22 Jul 2010 17:52:49 +0200 > From:"dtrussardi(a)tiscali.it" <dtrussardi(a)tiscali.it> > Subject: Re: [Seaside] WADispatcher trimForDeployment method > To: Seaside - general discussion<seaside(a)lists.squeakfoundation.org> > Message-ID:<AEDB320C-B2AF-4ECA-84B6-6B6FC9455DDE(a)tiscali.it> > Content-Type: text/plain; charset=us-ascii > > Hi, > > today i update my Pharo with the last version of ConfigurationOfSeaside30-DaleHenrichs.199 . > > And load it with : (Smalltalk at: #ConfigurationOfSeaside30) load. > > Monticello report the package : > > Seaside-Development-jf.134 > > Seaside-Tools-Core-lr.17 > > are load. > > > But after i don't found the method trimForDeployment . > > > The same situation are in Glass. > > > Are wrong or omit anything ? > > Thanks, > > Dario > > ------------------------------

1 0

SWFObject for Seaside 3.0a5?
by Tim Murray 22 Jul '10

22 Jul '10

Update: Using the WAObject component, I am getting Flash content displaying. html object width: 1025; height: 768; codebase:'http://download.macromedia.com/pub/shockwave/cabs/flash/swflas h.cab#version=10,0,0,0'; classId: 'clsid:d27cdb6e-ae6d-11cf-96b8-444553540000'; type: 'application/x-shockwave-flash'; url: MyCustomLibrary /#getFlash. getFlash resolves to ....(standardFileStream readOnlyFileNamed: somefile) contentsOfEntireFile.

1 0

WADispatcher trimForDeployment method
by dtrussardi＠tiscali.it 22 Jul '10

22 Jul '10

Hi, i work with Seaside 3.0 ( on GLASS and Pharo environment ). In Seaside 2.8 i reset the WADispatcher with : WADispatcher default trimForDeployment. Now in to 30 i d'ont found the method trimForDeployment. Any considerations ? Thanks , Dario

3 5

SWFObject for Seaside 3.0a5?
by Tim Murray 22 Jul '10

22 Jul '10

Good morning, My first post to this list. I searched the archives and have not seen a reference to this, hence this post. I am developing on Seaside 3.0a5 Platform is OpenCobalt-1.0a Things are going well with the project and this is a fun framework to code in. I would like to display Flash directly via a Seaside component. There was a functioning version for an earlier version of Seaside an example is here: http://udos.seasidehosting.st/seaside/examples/swfObject I installed the latest version of SWFObject from squeaksource and its throwing an error. Before I start hacking the source code for this, is there another option or functional equivalent I can use that is working in Seaside 3.0 ? For example I notice that in JQuery-Core-Objects there is a JQPlugin...perhaps I can get Flash in that? Thanks in advance. tmurray

1 0

Re: [Seaside] WADispatcher trimForDeployment method
by Boris Popov, DeepCove Labs (YVR) 21 Jul '10

21 Jul '10

In 3.0 you should simply not load development tools in your deployment images, thus no "trim". -Boris (via BlackBerry) ________________________________ From: seaside-bounces(a)lists.squeakfoundation.org <seaside-bounces(a)lists.squeakfoundation.org> To: seaside-wiki <seaside(a)lists.squeakfoundation.org> Sent: Wed Jul 21 10:30:29 2010 Subject: [Seaside] WADispatcher trimForDeployment method Hi, i work with Seaside 3.0 ( on GLASS and Pharo environment ). In Seaside 2.8 i reset the WADispatcher with : WADispatcher default trimForDeployment. Now in to 30 i d'ont found the method trimForDeployment. Any considerations ? Thanks , Dario

1 0

Re: [Seaside] [Issue 553] #isolate: broken - any updates?
by Boris Popov, DeepCove Labs (YVR) 20 Jul '10

20 Jul '10

I was, but didn't realize it was borked :) -Boris (via BlackBerry) ----- Original Message ----- From: seaside-bounces(a)lists.squeakfoundation.org <seaside-bounces(a)lists.squeakfoundation.org> To: Seaside - general discussion <seaside(a)lists.squeakfoundation.org> Sent: Mon Jul 19 13:28:05 2010 Subject: Re: [Seaside] [Issue 553] #isolate: broken - any updates? On Mon, Jul 19, 2010 at 11:27 AM, Boris Popov, DeepCove Labs (SNN) > I’m trying to figure out if there’s a suggested fix out there or if I should > be redesigning my isolate: blocks on the task to restore intended > functionality? I think it needs discussion. But first, by show of hands, how many people are actually using #isolate for any important task? Julian _______________________________________________ seaside mailing list seaside(a)lists.squeakfoundation.org http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

6 7

Running a legacy app on latest Linux
by Richard Eng 20 Jul '10

20 Jul '10

>Don't use -headless, is deprecated. I use: > >squeak -vm-sound-null -vm-display-null my.image my.script.st port 9001 > >CheersTabernac! This works!!!Thank you very much!Richard _________________________________________________________________ Game on: Challenge friends to great games on Messenger http://go.microsoft.com/?linkid=9734387

1 0

Running a legacy app on latest Linux
by Richard Eng 20 Jul '10

20 Jul '10

I have a legacy Seaside app that I need to run on the latest version of Ubuntu (Lucid Lynx). It's been field tested under Squeak 3.9 and Seaside 2.8 (under Feisty Fawn). On a fresh install of Ubuntu, I install Squeak 3.9. When I run the following command (taken from the legacy system): squeak -headless -vm-display-null MyApp.image "" port 9090 & I get the error message: could not find module vm-display-X11Aborted However, I can find vm-display-X11 in /usr/local/lib/squeak/3.9-8/. What's the problem? Is there anything else I need to install? (In the legacy system, there were 2 files that I could not identify: squeak.image and SqueakV3.sources, seemingly necessary to run squeak.) Thanks. Richard _________________________________________________________________ Look 'em in the eye: FREE Messenger video chat http://go.microsoft.com/?linkid=9734386

2 1

Some Javascript issues
by Martin Büttner 20 Jul '10

20 Jul '10

Hi, in my recent project I have fairly complex Javascript/jQuery code and whenever possible I use the Seaside abstraction. Unfortunately this frequently leads to bloated code, e.g. when I want to implement "==" on client side. My current code states: aQuery addDecoration: (JSBinary new operator: '=='; statement: aStatement). JQuery provides convenience methods for && and ||, but nothing else. Is the above line really best practice? The code gets awfully long. As well, there is no possibility to surround a number of statements with a for-block or another loop. I wrote a new JSDecoration now similar to JSCondition, but I suggest someone extends Seaside with that. Or do I overlook something in the framework? Thanks in advance, Martin

2 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

seaside July 2010