this is a question more appropriate for Seaside list :)
On 17 Oct 2016, at 20:07, Pierre CHANSON chans.pierre@gmail.com wrote:
In #SmalltalkImage>>metacelloPlatformAttributes, #'pharo5.x' #'pharo5.0.x’ have been removed and Seaside does not have configuration for pharo6.
Is there a plan to update the configuration of Seaside ?
Thanks !
Pierre and Norbert
Sure. Christophe Demarey has asked me if he can publish his changes to fix the config for pharo 6.
I will upload them as soon as I receive them
Johan
On 17 Oct 2016, at 21:04, Esteban Lorenzano estebanlm@gmail.com wrote:
this is a question more appropriate for Seaside list :)
On 17 Oct 2016, at 20:07, Pierre CHANSON chans.pierre@gmail.com wrote:
In #SmalltalkImage>>metacelloPlatformAttributes, #'pharo5.x' #'pharo5.0.x’ have been removed and Seaside does not have configuration for pharo6.
Is there a plan to update the configuration of Seaside ?
Thanks !
Pierre and Norbert
seaside mailing list seaside@lists.squeakfoundation.org http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
I uploaded the changes by Christophe. If it does not work, let me know. I did not try.
cheers Johan
ps: right now the configuration is identical for pharo5.x and pharo6.x. If things start to fail for Pharo 6, we need to make another baseline to not break the configuration for pharo 4 and pharo 5
On 18 Oct 2016, at 10:00, Johan Brichau johan@inceptive.be wrote:
Sure. Christophe Demarey has asked me if he can publish his changes to fix the config for pharo 6.
I will upload them as soon as I receive them
Johan
On 17 Oct 2016, at 21:04, Esteban Lorenzano estebanlm@gmail.com wrote:
this is a question more appropriate for Seaside list :)
On 17 Oct 2016, at 20:07, Pierre CHANSON chans.pierre@gmail.com wrote:
In #SmalltalkImage>>metacelloPlatformAttributes, #'pharo5.x' #'pharo5.0.x’ have been removed and Seaside does not have configuration for pharo6.
Is there a plan to update the configuration of Seaside ?
Thanks !
Pierre and Norbert
seaside mailing list seaside@lists.squeakfoundation.org http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
Le 18/10/2016 à 10:11, Johan Brichau a écrit :
I uploaded the changes by Christophe. If it does not work, let me know. I did not try.
cheers Johan
ps: right now the configuration is identical for pharo5.x and pharo6.x. If things start to fail for Pharo 6, we need to make another baseline to not break the configuration for pharo 4 and pharo 5
Hi!
I could load Seaside but when I start the adaptor and go to localhost:8080 I get an error[1] `receiver of #from:to: is nil`. There is some error on Jenkin's logs that where not here before[2].
[1] http://puu.sh/rN9fV/780adbcfe0.png [2] http://puu.sh/rN9rb/dd9de6776a.png
After the recent change in metacelloPlatformAttributes, we're having some problems in Voyage in Pharo6, and I investigated a bit.
Voyage loads Magritte3 Core stable, which uses - #version351: and - #baseline330ForPharo:
These methods contain spec declarations such as #(#'pharo3.x' #'pharo4.x' #'pharo5.x'). So I guess we should add #'pharo6.x' to the list and it will just start working again. To do that, I suppose it's fine to just modify #version351: and #baseline330ForPharo:, right? I mean, no need to create a #version352:only because of that.
regards, Martin
On Tue, Oct 18, 2016 at 10:41 AM, Cyril Ferlicot D. < cyril.ferlicot@gmail.com> wrote:
Le 18/10/2016 à 10:11, Johan Brichau a écrit :
I uploaded the changes by Christophe. If it does not work, let me know.
I did not try.
cheers Johan
ps: right now the configuration is identical for pharo5.x and pharo6.x.
If things start to fail for Pharo 6, we need to make another baseline to not break the configuration for pharo 4 and pharo 5
Hi!
I could load Seaside but when I start the adaptor and go to localhost:8080 I get an error[1] `receiver of #from:to: is nil`. There is some error on Jenkin's logs that where not here before[2].
[1] http://puu.sh/rN9fV/780adbcfe0.png [2] http://puu.sh/rN9rb/dd9de6776a.png
-- Cyril Ferlicot
2 rue Jacques Prévert 01, 59650 Villeneuve d'ascq France
seaside mailing list seaside@lists.squeakfoundation.org http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
On 18.10.2016, at 16:00, Martin Dias tinchodias@gmail.com wrote:
After the recent change in metacelloPlatformAttributes, we're having some problems in Voyage in Pharo6, and I investigated a bit.
Voyage loads Magritte3 Core stable, which uses
- #version351: and
- #baseline330ForPharo:
These methods contain spec declarations such as #(#'pharo3.x' #'pharo4.x' #'pharo5.x'). So I guess we should add #'pharo6.x' to the list and it will just start working again. To do that, I suppose it's fine to just modify #version351: and #baseline330ForPharo:, right? I mean, no need to create a #version352:only because of that.
No, please _do_ create a new version. The old versions should stay immutable as far as possible.
Best regards -Tobias
regards, Martin
On Tue, Oct 18, 2016 at 10:41 AM, Cyril Ferlicot D. cyril.ferlicot@gmail.com wrote: Le 18/10/2016 à 10:11, Johan Brichau a écrit :
I uploaded the changes by Christophe. If it does not work, let me know. I did not try.
cheers Johan
ps: right now the configuration is identical for pharo5.x and pharo6.x. If things start to fail for Pharo 6, we need to make another baseline to not break the configuration for pharo 4 and pharo 5
Hi!
I could load Seaside but when I start the adaptor and go to localhost:8080 I get an error[1] `receiver of #from:to: is nil`. There is some error on Jenkin's logs that where not here before[2].
[1] http://puu.sh/rN9fV/780adbcfe0.png [2] http://puu.sh/rN9rb/dd9de6776a.png
-- Cyril Ferlicot
2 rue Jacques Prévert 01, 59650 Villeneuve d'ascq France
seaside mailing list seaside@lists.squeakfoundation.org http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
seaside mailing list seaside@lists.squeakfoundation.org http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
On 18 Oct 2016, at 16:57, Tobias Pape Das.Linux@gmx.de wrote:
No, please _do_ create a new version. The old versions should stay immutable as far as possible.
Given that it’s only adding the new platform attributes because pharo6 removed it’s pharo5 attribute, I think this is OK. Am I missing anything?
However, for _any_ change that needs to occur in the future in orde to be pharo6 compatible, then YES, a new version and baseline _must_ be written.
cheers Johan
On 20/10/16 19:37, Johan Brichau wrote:
On 18 Oct 2016, at 16:57, Tobias Pape <Das.Linux@gmx.de mailto:Das.Linux@gmx.de> wrote:
No, please _do_ create a new version. The old versions should stay immutable as far as possible.
Given that it’s only adding the new platform attributes because pharo6 removed it’s pharo5 attribute, I think this is OK. Am I missing anything?
However, for _any_ change that needs to occur in the future in orde to be pharo6 compatible, then YES, a new version and baseline _must_ be written.
That is consistent with the way we dealt with the move from pharo4 to 5.
Stephan
Finally I didn't need to change anything, since it started to work... thanks to the person that fixed it!
Martin
On Fri, Oct 21, 2016 at 5:31 AM, Stephan Eggermont stephan@stack.nl wrote:
On 20/10/16 19:37, Johan Brichau wrote:
On 18 Oct 2016, at 16:57, Tobias Pape <Das.Linux@gmx.de
mailto:Das.Linux@gmx.de> wrote:
No, please _do_ create a new version. The old versions should stay immutable as far as possible.
Given that it’s only adding the new platform attributes because pharo6 removed it’s pharo5 attribute, I think this is OK. Am I missing anything?
However, for _any_ change that needs to occur in the future in orde to be pharo6 compatible, then YES, a new version and baseline _must_ be written.
That is consistent with the way we dealt with the move from pharo4 to 5.
Stephan
seaside mailing list seaside@lists.squeakfoundation.org http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside
Le 18/10/2016 à 15:41, Cyril Ferlicot D. a écrit :
Hi!
I could load Seaside but when I start the adaptor and go to localhost:8080 I get an error[1] `receiver of #from:to: is nil`. There is some error on Jenkin's logs that where not here before[2].
[1] http://puu.sh/rN9fV/780adbcfe0.png [2] http://puu.sh/rN9rb/dd9de6776a.png
I think that this mcz should correct the problem but I don't have the rights on Seaside repo. Can someone add me to the Seaside Team or copy the mcz?
I just added a 'pharo6.x' in the configuration where there is a 'pharo5.x' so it should be a safe change.
seaside@lists.squeakfoundation.org