seaside July 2009

seaside@lists.squeakfoundation.org

53 participants
43 discussions

Re: [Seaside] Re: MNU after clean install...
by Boris Popov 23 Jul '09

23 Jul '09

Sure, Ill give it a try and let you know tomorrow. -Boris (via BlackBerry) ----- Original Message ----- From: seaside-bounces(a)lists.squeakfoundation.org <seaside-bounces(a)lists.squeakfoundation.org> To: Seaside - general discussion <seaside(a)lists.squeakfoundation.org> Sent: Wed Jul 22 21:57:45 2009 Subject: Re: [Seaside] Re: MNU after clean install... 2009/7/22, Andreas Raab <andreas.raab(a)gmx.de>: > Philippe Marschall wrote: >> Do you know the state of IPv6 support in the VM? IIRC at least OLPC has >> it. > > The 3.11 series of VMs have the necessary support code. So do the 4.x > Mac VMs if I remember correctly (but you'd need to ask John to make sure). Boris, can you try one of those VMs and check if that fixes the problems as well? Cheers Philippe _______________________________________________ seaside mailing list seaside(a)lists.squeakfoundation.org http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

1 0

RE: [Seaside] MNU after clean install...
by Boris Popov 22 Jul '09

22 Jul '09

I disabled IPv6 system-wide and removed the entry from etc/hosts, all appears normal now. Lovely. Thanks! -Boris -- +1.604.689.0322 DeepCove Labs Ltd. 4th floor 595 Howe Street Vancouver, Canada V6C 2T5 http://tinyurl.com/r7uw4 -----Original Message----- From: Boris Popov Sent: Wednesday, July 22, 2009 12:22 PM To: Seaside - general discussion Subject: RE: [Seaside] MNU after clean install... Hmm, good point, 127.0.0.1 is definitely snappy, but removing IPv6 address from a hosts file didn't seem to make any difference. Oh well, this gets me going anyway, thanks! -Boris -- +1.604.689.0322 DeepCove Labs Ltd. 4th floor 595 Howe Street Vancouver, Canada V6C 2T5 http://tinyurl.com/r7uw4 -----Original Message----- From: seaside-bounces(a)lists.squeakfoundation.org [mailto:seaside-bounces@lists.squeakfoundation.org] On Behalf Of Julian Fitzell Sent: Wednesday, July 22, 2009 12:17 PM To: Seaside - general discussion Subject: Re: [Seaside] MNU after clean install... Hmm... ipv6? Could be something to do with how localhost is resolving - it could be trying ipv6 first then timing out after 2 seconds. Check the hosts file and see if you need to swap the order of the entries or something. Julian On Wed, Jul 22, 2009 at 12:13 PM, Boris Popov<boris(a)deepcovelabs.com> wrote: > I can't say I disagree, but it doesn't help me ;) It can't be a system-wide > issue though, as Apache on this same machine behaves normally (0ms > connecting, 5ms waiting for response). > > > > -Boris > > > > -- > > +1.604.689.0322 > > DeepCove Labs Ltd. > > 4th floor 595 Howe Street > > Vancouver, Canada V6C 2T5 > > http://tinyurl.com/r7uw4 > > > > From: seaside-bounces(a)lists.squeakfoundation.org > [mailto:seaside-bounces@lists.squeakfoundation.org] On Behalf Of Mariano > Martinez Peck > Sent: Wednesday, July 22, 2009 12:11 PM > To: Seaside - general discussion > Subject: Re: [Seaside] MNU after clean install... > > > > > > On Wed, Jul 22, 2009 at 6:09 PM, Boris Popov <boris(a)deepcovelabs.com> wrote: > > This same image + vm combo running on XP is working just fine. Sigh. > > Sorry, I cannot resist, but Vista sucks. > > > -Boris > > -- > +1.604.689.0322 > DeepCove Labs Ltd. > 4th floor 595 Howe Street > Vancouver, Canada V6C 2T5 > http://tinyurl.com/r7uw4 > > -----Original Message----- > > From: seaside-bounces(a)lists.squeakfoundation.org > [mailto:seaside-bounces@lists.squeakfoundation.org] On Behalf Of Boris Popov > Sent: Wednesday, July 22, 2009 11:44 AM > To: Seaside - general discussion > > Subject: RE: [Seaside] MNU after clean install... > > Julian, > > Not surprisingly, > > Duration > 0:00:00:00.004 > 0:00:00:00.002 > 0:00:00:00.004 > 0:00:00:00.001 > 0:00:00:00.004 > 0:00:00:00.002 > 0:00:00:00.004 > > Web Inspector and Firebug both report the bulk of that time spent in Latency > (Safari term) or Connecting/Waiting for response (Firebug term). I'll try > this on plain XP tonight to see if it might be a Vista issue. > > -Boris > > -- > +1.604.689.0322 > DeepCove Labs Ltd. > 4th floor 595 Howe Street > Vancouver, Canada V6C 2T5 > http://tinyurl.com/r7uw4 > > > -----Original Message----- > From: seaside-bounces(a)lists.squeakfoundation.org > [mailto:seaside-bounces@lists.squeakfoundation.org] On Behalf Of Julian > Fitzell > Sent: Wednesday, July 22, 2009 11:21 AM > To: Seaside - general discussion > Subject: Re: [Seaside] MNU after clean install... > > Not off the top of my head. > > The development tools are kind of hard to enable in the 2.9 alphas at > the moment but try this to get the profiler: > > + make sure Seaside-Squeak-Development package is loaded > + go to the config page > + click Configure next to your application > + under Ancestry, the configuration "Application Defaults" should be > listed; if not, add it > + click "Application Defaults". This configuration should be inherited > by all applications by default > + add WADevelopmentConfiguration to the ancestry > + click Close > + click Close > + start a new session of your application > > Now you can click Profile in the toolbar, do a few requests and click > "stop profiling". Hopefully the tree view will shed some light on > where all the time is being spent (it's definitely not slow in my > image). > > Julian > > On Wed, Jul 22, 2009 at 9:50 AM, Boris Popov<boris(a)deepcovelabs.com> wrote: >> Julian, >> >> Thanks, that did the trick. Now, would you have any idea why it might be >> taking 2,000ms to increment a counter example in this configuration? >> Seaside 2.8 on VisualWorks averages around 70ms on my machine, so >> there's got to be something wrong with the setup of Pharo and 2.9a4 on >> my side... Specific comparison screenshots can be found at >> http://tinyurl.com/mqsprp >> >> Cheers! >> >> -Boris >> >> -- >> +1.604.689.0322 >> DeepCove Labs Ltd. >> 4th floor 595 Howe Street >> Vancouver, Canada V6C 2T5 >> http://tinyurl.com/r7uw4 >> >> >> -----Original Message----- >> From: seaside-bounces(a)lists.squeakfoundation.org >> [mailto:seaside-bounces@lists.squeakfoundation.org] On Behalf Of Julian >> Fitzell >> Sent: Tuesday, July 21, 2009 11:07 PM >> To: Seaside - general discussion >> Subject: Re: [Seaside] MNU after clean install... >> >> Indeed. You'll see this problem if you use WAKom to start your >> adaptor. Nobody noticed because all we're all using the new control >> panel instead... :) >> >> http://code.google.com/p/seaside/issues/detail?id=411 >> >> This is fixed in Seaside-Adaptors-Comanche-jf.41 if you want to update. >> >> Or: >> - add a call to #new in WAKom>>defaultCodec and >> WAKomEncoded>>defaultCodec; or >> - use the control panel available in the World->Tools->more... menu >> to add the instance instead; or >> - execute "WAKom default codec: WANullCodec new" >> >> Julian >> >> On Tue, Jul 21, 2009 at 9:33 PM, Boris Popov<boris(a)deepcovelabs.com> >> wrote: >>> Same here, heh, my first time with pharo too. >>> >>> -Boris (via BlackBerry) >>> >>> ----- Original Message ----- >>> From: seaside-bounces(a)lists.squeakfoundation.org >>> <seaside-bounces(a)lists.squeakfoundation.org> >>> To: seaside(a)lists.squeakfoundation.org >> <seaside(a)lists.squeakfoundation.org> >>> Sent: Tue Jul 21 21:16:34 2009 >>> Subject: [Seaside] MNU after clean install... >>> >>> After I perform an install of Seaside 2.9.0a4 on a clean Pharo image, >>> I start Comanche and when I navigate to the url >>> (localhost:port/seaside), I receive the following error. >>> Does anyone else get this error? >>> >>> ========================== >>> >>> Internal Server Error >>> >>> MessageNotUnderstood: WANullCodec class>>url >>> >>> ========================== >>> >>> Thanks, >>> >>> Eric >>> _______________________________________________ >>> seaside mailing list >>> seaside(a)lists.squeakfoundation.org >>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside >>> >>> _______________________________________________ >>> seaside mailing list >>> seaside(a)lists.squeakfoundation.org >>> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside >>> >>> >> _______________________________________________ >> seaside mailing list >> seaside(a)lists.squeakfoundation.org >> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside >> _______________________________________________ >> seaside mailing list >> seaside(a)lists.squeakfoundation.org >> http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside >> > _______________________________________________ > seaside mailing list > seaside(a)lists.squeakfoundation.org > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside > _______________________________________________ > seaside mailing list > seaside(a)lists.squeakfoundation.org > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside > _______________________________________________ > seaside mailing list > seaside(a)lists.squeakfoundation.org > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside > > > > _______________________________________________ > seaside mailing list > seaside(a)lists.squeakfoundation.org > http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside > > _______________________________________________ seaside mailing list seaside(a)lists.squeakfoundation.org http://lists.squeakfoundation.org/cgi-bin/mailman/listinfo/seaside

1 0

jQuery lightbox flashes on but doesn't stick around inside a form
by Paul DeBruicker 22 Jul '09

22 Jul '09

Hi - This works as expected: renderContentOn: html self renderLightboxOn: html renderLightboxOn: html | id | html div id: (id := html nextId); script: (html jQuery new dialog title: 'Welcome Back!'; html: [ html text: 'Hi' ]; resizable: false; modal: true). ^ html submitButton onClick: (html jQuery id: id) dialog open; with: 'Hi' why does this only flash the lightbox without showing the contents: renderContentOnL html

2 2

MNU after clean install...
by Eric Hochmeister 22 Jul '09

22 Jul '09

After I perform an install of Seaside 2.9.0a4 on a clean Pharo image, I start Comanche and when I navigate to the url (localhost:port/seaside), I receive the following error. Does anyone else get this error? ========================== Internal Server Error MessageNotUnderstood: WANullCodec class>>url ========================== Thanks, Eric

2 1

Seaside 2.9 - how do I access session ivars? WARequestContextNotFound error
by Paul DeBruicker 20 Jul '09

20 Jul '09

Hi - I am in the initial stages of porting some code to Seaside2.9a3. The code works in Seaside 2.8.4. When a user logs in I store their user info in the session in an instance variable called user. In Seaside 2.8.4 calling 'self session user userId' would return the user's user id, after they'd logged in. With whatever I've done + 2.9a3 calling: self session user userId inside a renderContentOn: method throws an error that says UndefinedObject(Object)>>doesNotUnderstand: #userId. In the debugger for that error if I try to explore 'self session' I get a WARequestContextNotFound error. I do include webapp preferencesAt: #sessionClass add: AMSession. in the initialize statement for the application. I'm willing to believe that my login function is also a little off because I set the session ivar 'user' with 'self session user: user' How do I store and access information in the session in Seaside 2.9? Is it the same as 2.8.4 and I've just got another error somewhere else thats just showing up here? I'd appreciate any suggestions for remedying my lack of understanding. Thanks Paul

4 8

Seaside and Microsoft's IIS
by Louis LaBrunda 19 Jul '09

19 Jul '09

Hi All, I am at a point where I need to set up a test web site for my Seaside based web application. For my local testing I am using Apache and its Virtual hosts capability. Apache handles the file serving and passes URLs that start with "/seaside" on to my Seaside NT service after changing the port. There's more to the Apache setup than this but basically this rewrite rule does the work. [code]RewriteRule ^/(seaside.*)$ http://localhost:8788/$1 [P,L][/code] My customer wants to run behind Microsoft's IIS. Does anyone know how to set up the same kind of thing in IIS? Thanks, Lou ----------------------------------------------------------- Louis LaBrunda Keystone Software Corp. SkypeMe callto://PhotonDemon mailto:Lou@Keystone-Software.com http://www.Keystone-Software.com

4 4

Little question about deploying, dns, etc...
by Mariano Martinez Peck 17 Jul '09

17 Jul '09

Hi: I am trying to reproduce in my Linux box what I will have in the server. I am doing step by step. No webserver right now (for this problem). I have dynamic IP from my ISP so I have running a dyndns in this pc which is crapodino.homelinux.com. I have registered and working this domain: www.destinomochila.com.ar I use EditZone so that it redirects from www.destinomochila.com.ar to crapodino.homelinux.com:8888/seaside/destinoMochila. When I configure this in EditZone I put "cloacked" to this redirect. This does that when the user enter to www.destinomochila.com.ar in the browser it still display that URL despite the fact it was redirected to crapodino.homelinux.com:8888/seaside/destinoMochila. If I don't put this cloacked option the browser then displays that URL and I don't want that. The redirect is working perfect. I and others can access without any problem to: 1) http://www.destinomochila.com.ar/ 2) http://crapodino.homelinux.com:8888/seaside/destinoMochila And I can enter to 3) http://localhost:8888/seaside/destinoMochila With 2) and 3) If I go to a link from the menu, the browser correctly shows: http://localhost:8888/seaside/destinoMochila/LugaresDestino or http://crapodino.homelinux.com:8888/seaside/destinoMochila/LugaresDestino The problem is with 1) If I go to the same link of the menu, the URL is still http://www.destinomochila.com.ar/ It does never change :( However, if I explicity put this URL http://www.destinomochila.com.ar/LugaresDestino in the browser, if found perfectly the page Does anyone know what I am doing wong ? Perhaps I must put something in http://localhost:8888/seaside/config to my destinoMochila app in the "server" section. Right now that it is as default. Thanks a lot for the help, Mariano

1 0

HTML EMail
by Louis LaBrunda 15 Jul '09

15 Jul '09

Hi All, I am working on a Seaside server that as part of its function has to send EMail with HTML content. I have subclassed WAComponent to make an object that defines the HTML and used WARenderCanvas to render it. I am wondering if I should have subclassed WAPresenter instead of WAComponent. I'm not sure it matters much but would be interested in any comments. Lou ----------------------------------------------------------- Louis LaBrunda Keystone Software Corp. SkypeMe callto://PhotonDemon mailto:Lou@Keystone-Software.com http://www.Keystone-Software.com

3 4

Weird problem with libraries
by Mariano Martinez Peck 15 Jul '09

15 Jul '09

Hi folks, I have a problem with a library. I am using a Pier Gallery addon that uses Prototype.js, scriptaculus, builder, effects, etc. My application DOESN'T have SULibrary added. It has it's own library called DestinoMochilaLibrary with this method: DestinoMochilaLibrary>>selectorsToInclude ^ #(destinoMochilaCss) Now, to be able to use that plugin I override the method updateRoot: like this: DestinoMochilaLibrary>>updateRoot: aHtmlRoot super updateRoot: aHtmlRoot. aHtmlRoot javascript url: ' http://www.roard.com/lightbox2/js/prototype.js'. aHtmlRoot javascript url: ' http://www.roard.com/lightbox2/js/scriptaculous.js?load=effects,builder'. aHtmlRoot javascript url: 'http://www.roard.com/lightbox2/js/lightbox.js '. aHtmlRoot stylesheet url: ' http://www.roard.com/lightbox2/css/lightbox.css' Obviously this is not good because I am requesting another website. Thus, I wanted to have it locally. Then I did this: - Add SULibrary to my application - Downloaded the http://www.roard.com/lightbox2/js/lightbox.js and http://www.roard.com/lightbox2/css/lightbox.css because they are not in SULibrary. - Then I uploaded both files to SULibrary and I could perfectly see the new methods lightboxJs and lightboxCss in SULibrary. - I can also see all links in http://localhost:8888/seaside/files/SULibrary/ - Removed DestinoMochilaLibrary>>updateRoot: The problem is that if I remove the DestinoMochilaLibrary>>updateRoot: (which should be not used now), the plugin doesn't work. It is like if cannot find the javascript libraries. Let's take the example of protoype. In the first version, my html rendered shows: <script type="text/javascript" src=" http://www.roard.com/lightbox2/js/prototype.js"></script> which is correct. After my changes, I see: <script type="text/javascript" src="/seaside/files/SULibrary/prototype.js"></script> which I think it is also correct. Now...what can be the problem that the plugin doesn't work ??? More information. If I change my code to this: updateRoot: aHtmlRoot super updateRoot: aHtmlRoot. aHtmlRoot javascript url: ' http://localhost:8888/seaside/files/SULibrary/prototype.js'. aHtmlRoot javascript url: ' http://localhost:8888/seaside/files/SULibrary/builder.js'. aHtmlRoot javascript url: ' http://localhost:8888/seaside/files/SULibrary/effects.js'. aHtmlRoot javascript url: ' http://localhost:8888/seaside/files/SULibrary/lightbox.js'. aHtmlRoot stylesheet url: ' http://localhost:8888/seaside/files/SULibrary/lightbox.css' It works perfect!! But I don't think I have to do this...I must be doing something wrong. Thanks a lot for the help in advance. Mariano

3 4

File Upload
by Sebastian Van Lacke 14 Jul '09

14 Jul '09

Hello people, I am working on a form containing some text inputs and a fileUpload input, and finally a submit button to send all the data. I would like to display the file uploaded link before the user send the complete form. So I asume that there will be two forms. One inside the onother. The internal form only for submit the file and show it to the user. The problem is that when the user submit the form with all the data, the fileUpload callback is evaluated for second time, with value nil , and lost the file. I need something like this: textInput textInput textArea input fileUpload input - upload button display the uploaded file link submit button what is the correct way to address this problem? Thanks, Sebastian

4 11

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

seaside July 2009